User's Manual

If the two units were connected and paired before, the two units will connect and pair with each
other automatically.
2. Touch " " button on one of the two units, then touch " " button on another unit, the two
units will search and pair with each other.
The deputy unit will enter standby mode without any sound output or operation after 10 minutes.
8
BLUETOOTH PAIRING AND CONNECTION
FIRST TIME PAIRING
1. Push the power switch to "ON" position to power on both units, the two unit will send a sound,
and the BT/LINE IN indicator will flash.
3. After successful pairing and connection, a chime will be heard and the BT/LINE IN indicator on
main unit will flash.
NOTE:
The unit from which the " " button being touched will be the main unit.
Repeat the operation of STEP 2 to switch the main unit before pairing with bluetooth enabled
audio player or mobile phone.
5. After successful connection, the BT/LINE IN indicator on main unit will stay lit.
6. Play track on bluetooth enabled audio player or mobile phone as asual.
4. Open the bluetooth on bluetooth enabled audio player or mobile phone and try to search and
pair with the main unit, the pairing name " SP096SP096
NOTE:
Before pairing, make sure the LINE IN cable is not plugged into the LINE IN jack.
" will appear, select it and
make connection.
NOTE:
If the main unit had been switched before connected with the bluetooth enabled audio player
unit again although there is "SP096" listed on pairing name list.
During playing:
A:Touch or button to skip to previous or next track.
B:Touch button to pause, touch again to resume playing.
C:Touch VOL + or VOL - button to increase or decrease the volume.
or mobile phone, the bluetooth enabled audio player or mobile phone must search the main
The A, B, C operation above are simutaneous during playing.
For example, touch VOL + button on one of the two units, the volume on both units will increase.
NOTE:
The main unit will enter standby mode without any sound output or operation after about 11
minutes. Powering on both units by STEP 1.
Holding the button on main unit to cut off connection between main unit and bluetooth
off connection between main unit and the deputy
unit. (To reconnect the deputy unit, please pause playing on main unit, and restart deputy unit.
enabled audio player or mobile phone.
Holding the button on deputy unit to cut
DISCONNECTION:
After reconnection with main unit again, touch VOL - to set to minimum volume, then touch
VOL + to set to the desired volume.)