SCR 1997 OPERATING INSTRUCTIONS BLUETOOTH®CLOCK RADIO WITH USB CHARGING The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All other trademarks and trade names are those of their respective owners.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
PRECAUTIONS Safety Information 1. In order to shut off the power of this product completely, unplug the power cord from the wall outlet or remove the connected USB cable. Be sure to unplug the unit and remove all power supply such as USB cable or dry batteries if you do not intend to use it for an extended period of time, such as while on vacation. 2. If this product develops trouble, contact a qualified service center, and do not use the product in a defective state.
PROdUCT FEATURES • • • • • • • • Bluetooth® with hands-free function Dimmer function Sleep timer function FM digital tuner with 20 presets Dual alarm clock function — Wake to Radio/Buzzer Snooze function Auxiliary input USB charge LOCATION OF CONTROLS TOP vIEW 7 8 9 10 11 MIC 1 2 3 4 MO ST 6 5 REAR vIEW 12 13 14 15 1. Memory/ Set button 2. Power/ Function button 3. / / MO/ST button (Play/pause/hands-free/mono/stereo) 4. Preset button 5. LED display 6. Snooze/ Sleep/ Dimmer button 7.
LEd dISPLAY AL1: Icon lights when Alarm 1 is on. AL2: Icon lights when Alarm 2 is on. PM: PM time indicator FM: FM indicator POWER SOURCE The unit is designed to be operated by using the included AC adaptor. 2 x 1.5 V “AAA” batteries (not included) are also required for the clock, radio, preset and alarm memory backup. CONNECTING THE POWER AdAPTOR 1. Plug one end of the power adaptor into the DC in jack on the rear of the unit. 2.
CLOCk SETTING Connect the power adaptor. The unit will be in standby mode. You can now set the clock time and adjust the LED brightness as follows: SETTING THE TIME MANUALLY 1.) To set the hour, press and hold the MEMORY/SET button until the hour digits flash. or button to select 2.) While the hour digits are flashing, repeatedly press the the correct hour digits. 3.) Press the MEMORY/SET button to confirm the hour setting and the minute digits will flash to prompt for input. or buttons until 4.
you selected. Then the unit will start playback. 8.) Adjust the sound level by pressing the VOLUME+/AL1 or VOLUME-/AL2 buttons. NOTE: i. Fully extend and relocate the FM antenna to get better reception ii. If the received FM stations are in stereo mode, the unit will play in stereo mode automatically. If reception is weak, press the MO/ST (Mono/Stereo) button to turn the unit to mono mode. ALARM OPERATIONS The unit provides two alarms: AL1 and AL2.
LISTEN TO EXTERNAL AUdIO dEvICE This unit provides with an auxiliary input jack to connect your cell phone or MP3 player, etc. 1.) Use an audio cable (not included) with 3.5mm stereo plug on each end of the cable. 2.) Plug one end into the AUX IN Jack on the rear of the unit and the other end of the cable into the Line-out jack or phone jack on your external audio device. 3.) Press the POWER FUNCTION button repeatedly until “AU” appears on the display, the unit will turn to AUX IN mode. 4.
NOTE: / or i. devices. buttons may not work with some of the players in your external RECEIvING A CALL The built-in microphone on the top of the unit enables hands-free button to answer the call. button to answer the call. If you receive a call, press the button again if you want to hang up. Press the button to reject the call. Press and hold the PLACING A CALL When the Bluetooth device dials a contact number, the music playing will stop and the unit will become a phone speaker.
TROUBLESHOOTING If you experience difficulties in the use of the unit, please check the following: PROBLEM The unit is not responding. (No power). CAUSE SOLUTION AC adaptor is not plugged into the wall outlet or the other end of the adaptor is not plugged into the DC IN jack on the back of the unit. Plug the AC adaptor into the wall outlet and plug the other end of the AC adaptor into the DC IN jack on the back of the unit. Wall outlet is not functioning.
The FCC Wants You to know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.