The Edison Bluetooth Vintage speaker MODEL: BGR-2/0163, CAB-B3602 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
FCC WARNINGS: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
INSTALLATION STEP 1: Insert the connecting and decorating ring into the horn rod. STEP 2: Follow the shown method to match the gap between the ring 1 and ring 2. STEP 3: Swivel the horn and the horn rod by reverse direction until they fix each other firmly.
PRODUCT OVERVIEW LINE IN OPERATION This unit provides an auxiliary audio input jack for connecting external audio devices like MP3 players and listen through the speakers of this unit. 1. Use an audio cable with one 3.5 mm stereo plug on each end. 2. Plug one end into the LINE IN jack on the rear of the unit and the other end of the cable into the LINE OUT, AUDIO OUT Jack or Headphone Jack of your external audio device. The Indicator LED will turn RED. 3. Turn on the external audio device and the unit. 4.
BLUETOOTH OPERATION 1. Push the power switch to ON position to turn on the unit, the Indicator LED will flash BLUE. The unit is now ready to pair with your Bluetooth enabled device. 2. Turn on the Bluetooth function of your Bluetooth enabled device and search to find the pairing name “CAB-B3602”. 3. Select "CAB-B3602" when it appears on your device screen. 4. After successfully pairing, the Indicator LED stops flashing and a tone sounds. You can now play music from the Bluetooth enabled device.
TROUBLESOOTING GUIDE Please refer to the following possible solutions before inquiring for service. Symptom Possible Problem Solution The unit is disconnected from Reconnect to the AC outlet. The unit does not the AC outlet. respond (no power) Try the unit on another No power from the AC outlet. outlet. Unit is ON but there The volume control has been Increase Volume on is low or no volume turned all the way down. external device.