User's Manual

Shenzhen Jumper Medical Equipment Co.,Ltd
Address: D Building, No. 71, Xintian Road, Fuyong Street, Baoan,
Shenzhen, Guangdong, China
Web: www.jumper-medical.com
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
93MM
4
1. To prevent slipping, do not place the scale on a slippery floor, and do not use it
when your feet or the scale are wet.
2. Always stand in the middle of the scale, to prevent it from accidentally flipping over
while weighing yourself.
3. Only use the scale in a dry environment, and do not immerse it in water.
4. Wipe the surface of the scale with a damp cloth and mild detergent. Do
not use any organic solvents or other chemicals.
5. After the batteries are depleted, immediately remove them to avoid potential leaking
and corrosion.
6. This scale is not recommended for persons with a pacemaker or other implanted
medical devices. The accuracy of the body composition data may vary when used by
professional athletes, pregnant women, and certain other individuals with special
conditions.
Precautions
5
1
Please pull out the insulation film beside the battery cover.
Installing the Batteries
Please kindly scan below QR code and download “JUMPER Health”to your phone.
Remark: Our APP is available for IOS and android device with Bluetooth.
Download the App
Dimensions: 280 × 280 × 23.5 mm
Net Weight: 1.3 kg
Weighing Range: 3kg - 180 kg
Weighing Units: kg / lb
Division: 0.1 kg / lb
Casing Material: Tempered glass, ABS engineering plastic
Operating Temperature: 0 ~ 40°C
Frequency: 2402 - 2480 MHz
Max. Output: 1.5 dBm
Power Source: 3 x 1.5 V AAA batteries
Specifications
JumperHealth
The following symbol signifies that this product has to be disposed separately
from ordinary household wastes at its end of life. Please kindly be aware that
this is your responsibility to dispose the electronic equipment at recycling
centers so as to help conserve the natural resources.
Disposal and Recycling Information
Open the cover
2
Open “JUMPER Health” APP, complete the user registration, and login as
instructed.Enter your nickname, gender, date of birth and height as instructed.
After pairing the scale, you can check the measured data via the “JUMPER Health”
App.
Personal information is used to analyze your body composition. To ensure the
accuracy of the results, please enter accurate personal information.
Pairing the Scale
Place the scale on a hard, flat floor.
Please be barefoot as shown in the figure.Ensure feet to touch the four electrodes
during measurement.
Stand on the scale surface to measure your weight and body fat.The measurement is
completed when the value on the LED screen flashing, then the measured data will be
displayed on the APP.
The body composition data provided by this scale is only for reference and does not
constitute medical advice.
Weighing and Measuring Body Fat
3
The factory default unit is kg. The switch between kg and lb can be achieved via
JUMPER Health App.
Converting Weight Units
Press the scale and do not measure weight until the scale turns on and returns to
zero. Moving or bumping the scale may affect the accuracy, in which case you should
weight again to make sure the measured data is accurate.
Weighing Items
When weighing, a flashing "Lo" indicates
a low battery level, and you should
replace the batteries as soon as
possible.
When weighing, a flashing "Err" indicates
the weight being measured exceeds 180 kg,
which is beyond the limit of the scale.
Alert Indications
97MM
Remove the insulation
lm
JPD-BFS200A
Bluetooth Scale
User Manual
Manual Version: 1.0
Issuing Date:2019.10
Download APP with
JUMPER Health
Read this manual carefully before first use the body fat scale, and keep it for future
reference.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Statement