User's Manual

说明书单页尺寸：140*140mm
Smart LED Light Strip
User Manual
Please read this manual carefully before using the product and
keep it in a safe place for future reference.
Using the device
Connect your device to a power source and make sure your phone is
connected to a 2.4 GHz Wi-Fi network.
Download APP
For android users, please search for Smart Life and download it from
Google Play Store; for iOS users, please search for Smart Life and
download it from iOS APP Store; or scan the QR code to download
and install the APP.
For the first use, please click the "register" to register for an account.
Click "login" if you already have an account.
Binding the device
Two methods to bind the device; method Ⅰ: add manually; method
Ⅱ: auto scan
Method Ⅰ (add manually):
1.Open the APP and enter "Home" page, tap "+" in the upper right
corner, and then select add manually;
2.Tap "Lighting" in the "device list"; select "Strip Lights" and follow
the on-screen instruction to add the device;
3.Select a 2.4GHz Wi-Fi network and enter the password; click next;
Wi-Fi reset
Press and hold the button (brightness adjustment/Wi-Fi reset) for 5s, the
indicator light on the controller will blink rapidly (0.5s/1 time), indicating
the Wi-Fi reset is done and the device is ready to pair. (The previously
added smart light strip will be removed.)
Connecting method (5V smart version)
①
③
④
⑤
⑥
⑦
②
⑧
①Light strip
②Light strip connector
③USB connector
④Brightness adjustment/
Wi-Fi reset
⑤ON/OFF/light mode
⑥Indicator light
⑦Controller
⑧Color sensor(for selected model)
Connecting method (24V smart version)
①
⑧
④
⑤
⑥
⑦③② ⑨
①Light strip
②Light strip connector
③Brightness adjustment/Wi-Fi reset
④ON/OFF/light mode
⑤Indicator light/music sensor
(for selected model)
⑥Controller
⑦DC female connector
⑧DC male connector
⑨Adapter
FAQ
Troubleshooting
1.The light is off/blinking/flickering
Check if the connection between the light strip and the connector is
correct. Test the USB port with other adapters. If the light illuminates
normally, the issue might be caused by the wrong power output or
low voltage.
2.The light doesn’t work in automatic sensing mode？
Check if the light is set to automatic sensing mode by confirming that
the controller indicator is in breathing status.
3.The light is not changing in color sensing mode？
Check if the light is set to color sensing mode by confirming that the
indicator on the controller is in breathing status.
Check if the color sensor is correctly installed to the screen with the
correct installation procedure.
4.The light is not changing in music sensing mode？
Check if the light is set to music sensing mode by confirming that the
indicator on the controller is in breathing status.
5.The light is flashing after turning off the TV
The USB port will supply power even the TV is turned off. Press and
hold the controller button to turn off the light.
6.Can’t connect to Wi-Fi?
① Wi-Fi signal is weak.
② Confirm the Wi-F connected to your phone is a 2.4G network (5G
network cannot be connected).
③ Press the brightness adjustment/Wi-Fi reset button for 5s to re-en-
ter the paring mode and try to connect again.
7.The controller button doesn’t work
Contact us if it still fails to function even you test with other adapters.
Product introduction
Smart RGB ambient light strip can be used on TV or monitor, in bedroom, kitchen
room, living room, other recreation places, etc.
Amplify the atmosphere with two modes: the screen sensing mode can automati-
cally capture and display the color on the screen; and the music sensing mode
syncs the light with the rhythm of the music once activated.
You can also adjust different light modes and light colors to meet the needs of
various moods.
Product features
Color customizing Brightness adjustment One-button control Phone control
Extendable capability Scene change Timer Screen color capture
Optional modes Energy saving Easy installation Voice control
Brightness adjustment/Wi-Fi reset:
①Press: adjust from 8 levels of brightness, from bright to dim;
②Press and hold: press for 5s, the indicator light on the controller
will flash, indicating the Wi-Fi has been reset successfully and the
device is ready to pair. (The previously added smart light strip will be
removed.)
Note: The light strip features a memory function that allows the
light to remain at the set mode after power off.
Indicator light status:
1.Power on: LED flashes (0.5s/1 time); LED is solid on after paired;
Screen sensing mode: LED is in breathing status.
Music sensing mode: LED is in breathing status.
Other modes: LED is solid on.
2.Power off: LED is off.
Third-party smart speaker connection
Support Alexa and Google Assistant.
Go to the main page, click the " " button in the upper right corner to
set the light strip, select your device name, and then follow the
on-screen instruction to add the device.
Specification
Product certification
5V TV Smart version 24V TV Smart version
68*32.7*13mm
Matte white
Control modes: button control, APP control, voice control
5V 1A 24V 1A
controller/light strip, 3M adhesive tape
Product name
Controller size
Color
Control modes
Power supply
Light source
Connecting length
Working environment
Installation method
Accessories
5050 RGB Serving life: 50,000 hours
5m(MAX) 15m(MAX)
Temperatures: -20°C to 55°C (humidity 0% to 80% RH)
Controller, light strip, connector,
adapter, instruction manual
Controller, light strip, connector,
color sensor, instruction manual
Button controls introduction
ON/OFF/light mode
Brightness adjustment/Wi-Fi reset
Solid green
Solid yellow
Solid cyan
Solid violet
Mode1
Mode4
Mode5
Mode6
Mode7
Automatically capture and display the color on the screen
For selected
models
Automatically sync the light with the rhythm of the music
Mode2
Mode3
Flowing light effect(blue, green, and cyan)
Breathing light effect(pink)
ON/OFF/light mode button
Press the ON/OFF button to enter the light mode; the indicator light illuminates.
ON
Optional light
modes
Power off
press and hold the ON/OFF button; the indicator goes off.
TV installation
Automatically capture and display the color on the screen when used on
TV as ambient light.
Installation method
1.Clean the area where you want to install the light strip and keep it clean;
2.Paste the LED light strip on the back or the edge of your TV or monitor; use the
connector to keep the light strip flush in the corners. Please fold the LED light
strip carefully;
3.onnect the USB port on the controller with the 5V port on your monitor;
(If the
controller has a 24V DC interface, please use a 24V adapter.)
4.Firmly and correctly connect the light strip connector on the controller to the
light strip with the polarity facing the same direction of + and -;
5.Tear off the adhesive tape on the back of the controller and place the
controller in position. Connect the color sensor jack to the controller
connector;
6.Vertically install and fix the color sensor on the left or right side of the screen
with the head of the color sensor and the edge of the device aligning vertically;
7.Installation completed; ready to use.
Back installation Edge installation
Sensor
4.Power the product, the blue indicator light on the controller will
blink (0.5s/1 time), the device will automatically enter the pairing
mode, click confirm the indicator rapidly blinks (0.5s/1 time) to pair;
5.The connecting page will be displayed. The indicator light on the
controller is solid on after paired;
6.The page indicating the device has been added successfully will be
displayed. You can edit the device name now.
Go to the main page, click " " to set the light effect, and then click
“screen sensing” icon to enter the screen sensing mode.
Screen induction mode
Go to the main page, click " " to set the light effect, and then click
“music sensing” icon to enter the music sensing mode.
Musical mode
My home
FCC statement
This device complies with Part 15 of the FCC Rules: Operation is
subject to the following two conditions: 1. This device may not cause
harmful interference and2. This device must accept any interference that
is received, including any interference that may cause undesired
operation.
RF exposure warning :
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment shall be installed and
operated with minimum distance 20cm between the radiator & body. This
device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz)
band. Ad Hoc function is supported but not able to operate on non-US
frequencies. Do not use the device with the environment which below
minimum -30 ℃ or maximum over 50℃ .
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.