Magnetic Wireless Charger Car Mount (ACPH004/ACPH004 Pro) User Instructions Please read the instructions carefully before use and keep it with proper storage (V1.
Product Overview 1.
2.
Clip Control Button Rotating Ball Joint Clip Mouth Adjustable Air Vent Support Suitable for horizontal air vent Suitable for vertical air vent
Package Contents Magnetic Wireless Car Charger Vent Clamp Type-c Cable Cradle Knob Suction Cup Mount (For ACPH004 Pro) Car Charger (Optional) X1 X1 X1 X1 X1 X1
Features Suitable for the original MagSafe case or other iPhone case with magnetic. Elegant and freeflow design with a rounded profile and ambient light complements your iPhone 13 or newer version. Experience a smarter driving experience with the set-to-drive and ambient wireless charger mount. Any MagSafe capable iPhone magnetically snaps in and charges, It eliminates the need to find that perfect alignment. Working withMagSafe provides a fast chargeing experience.
Specification Model： ACPH004 / ACPH004 Pro Cable length： 1M Main body size： 70×20.7×70mm Best transmission distance： 3-8mm Color： Black Main body net weight： 65g Material： ABS+PC / PC transparent black material / silica gel Charging interface： Type-C Installation method： Vent clamp type /Suction cup type Applicable parts： Air vent / Dashboard Input： Applicable models： Output： 15W Compatible with 10W/7.5W/5W Product certification: 12V Compatible with QC 3.0/PD 2.
Installation Vent clamp type | Installed in the position of air vent. 1. Put on the Cradle Knob and insert it to the Ball Joint. 2. Insert the Ball Joint forcibly into the socket at the back of the wireless charger and tighten the Cradle Knob.
3. Press the Clip Control Button to let Clamp Mouth secure the colorful light Wireless Car Charger onto the air vent, then press the Adjustable Air Vent Support to fix it. 4. Plug in the Car Charger into the car's cigarette lighter or power port, and insert the USB interface of cable into the Charger's port. 5. Then plug in the Type-C interface into the Wireless Charger to power on the device. When the RGB indicator blinks, the Wireless Car Charger is functioning normally. 6.
Suitable for the following air vents： Not suitable for the following air vents：
Suction cup type | Installed in the position of dashboard. 1.Put on the Cradle Knob and insert it to the Ball Joint. 2. Insert the Ball Joint forcibly into the socket at the back of the wireless charger and tighten the Cradle Knob.
3. Clean up the dashboard, then open the Locking Lever. Press mount firmly onto the dashboard, then push the Locking Lever down to engage suction. 4. Plug in the Car Charger into the car's cigarette lighter or power port, and insert the USB interface of cable into the Charger's port. 5. Then plug in the Type-C interface into the Wireless Charger to power on the device. When the RGB indicator blinks, the Wireless Car Charger is functioning normally. 6.
Adjusting the Mount Telescopic Knob Located on top of Telescopic Arm, loosen to extend the arm and tighten to secure distance. 45mm Pivot Knob Located on the side of the Mount Base, turning allows you to pivot telescopic arm, tighten to secure position.
Operation RGB Indicator Light RGB Indicator Light ① Standby Mode: The colorful ambient indicator light up ② Charging Mode: Green light flashing ③ Fully Charged: Green light circles ④ FOD (Foreign Object Detection) or Protection Mode: Red Light
Cautions 1. When using this product, please use an adapter with output of 12V or compatible with QC 3.0 PD 2.0 quick charging function. 2. No metal objects, such as iron sheets, rings and metal protective coverings, can be placed on the contact surface during charging. 3. If the mobile phone is found to have the problems of intermittent charging or serious heat generation, it is most likely that the receiving coil of the mobile phone is not completely aligned with the wireless charging coil.
5. Keep the operating ambient temperature at 0-25℃, do not place the product in water and fire, and the enviroments with too high(>40℃) and too low(<-20℃) temperature， and keep the fittings from reach of children. 6. Please use dry soft cloth to clean the surface, and do not clean with chemicals, soap or detergent. 7. Incorrect use or improper placement of the product by the user may lead to a reduction in the service life of the product or damage to the product.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
