2nd Generation Video Doorbell QUICK Start Guide
1. what’s in the box Video Doorbell Wall Mount Bracket Indoor Wireless Chime List Tools USB Charging Cable Extension Wire & Wire Nuts (Optional) Jumper for Original Indoor Chime (Optional) User Guide 2.
. Meet the chime 1 2 3 6 Button Function Explaination: Click to select ringtone Click to set volume: 4 1 2 3 4 5 Ringtone Selection Volume Control Setting (Pair/ Reset) Red LED Indicator 7 level 1: 110 dbl level 2: 100 dbl level 3: 90 dbl level 4: 80 dbl 8 5 6 7 8 Click: Blue LED Indicator Battery Compartment Micro USB Power Port AA Battery × 3 Enter into/quit pairing mode Press & hold for 5 sec: Restore factory defaults 4.
Start the Wi-Fi configuration following the in-App instructions or referring to below tutorial steps. 9:55 9:55 9:55 Devices Camera Doorbell Battery Camera Floodlight Camera Please follow the instruction manual to power the device 9:55 Install Doorbell Install Doorbell Press the [Bell] button, and tap Next Help this) th Wait for the LED indicator to flash RED Network Video Recorder Tap Next Next Next Devices Messages Next Me 1. Tap “+” to add device 9:55 2. Select Doorbell 3.
LED indicator explanation: Solid Red Device is abnormal. Solid Blue Successfully connected to WiFi network. Flashing Red Slowly Ready for WiFi configuration. Flashing Blue Quickly Firmware is upgrading. Flashing Red Quickly Device is connecting to WiFi. Nothing Power off. 5. Live view Tap on the Home page devices to watch live view from your doorbell.
. Settings 1 2 3 4 5 6 Back to live view Edit device name Receive/block motion alarms Share device with other users Device information Basic function: 1. Motion detection on/off 2. Sensitivity Setting 3. Alarm interval Setting 4. Alert only when people appear(on/off) 5. Alarm schedule 6. Motion detection area setting 1. LED Indicator on/off 2. Night vision on/off/auto 3. Human detection frame on/off 4.
8. History Playback Tap ‘History’ to play the video clips recorded in the MicroSD card.
9. Connect the chime 1 Supply power to the chime The chime can be powered by 3 units of AA batteries(Provided) or a DC5VО1A power adapter. (not included) Powered by AA batteries Powered by DC5V Adapter and Micro USB Cable 2 Click reset button Reset Button 3 Press the doorbell button Red LED Flashing Blue LED Flashes Click on RESET only once, and you will see the chime indicator flashing red, indicating that the chime is in pairing mode.