JT707A E-seal Tracker Shenzhen Joint Technology Co.
1. Application ....................................................................................................................................................................................... 3 2. Standard Introduced ........................................................................................................................................................................ 3 3. Product introduction .............................................................................................
1. Application Guidance for internal techniques and customer support 2. StandardIntroduced IEC60529/GB4208-2008 Housing Protection Level 3. Product Introduction JT707A ,an Intelligent E-lock for mobile assets management solutions ,boasts the tiny size,easy installation and low cost which supports GPS. Real-time tracking information for assets and remote changing of product’s configuration are available.
. FunctionIntroduction 4.1. Remote Tracking of Device’sStatus Device’s status can be captured by means of real-time tracking, such as speed,direction,GPS location and status of lock rope, which secures the shipping in a more efficient way. 4.2. Smart Working Mode Device in sleep can be waken up by inserting or cutting rope.
Low battery alarm Battery Configuration Battery management Recharge Li-ion battery, capacity 1500mAh; Configuration USB PORT, GPRS Low battery management 4.6. Continuous Working Period No.
5. Operation Device 5.1 Recharge Put device on the “Config&Recharge BOX”, switch to recharge status, the “Config&Recharge BOX” the other side connect to adapter, then red LED will be light. Note: LED turn to green means full charged. Note: When you are using adapter output 5V/1A, recharge to 90%, will spend 100 minutes, recharge to 100%, will spend 150 minutes.
5.2 Device Configuration 5.2.1 PC tool to configure device Put device on the “Config&Recharge BOX”, switch to config status, the “Config&Recharge BOX” the other side connect to computer, then green LED will be light. Then install the config cable driver.
Check the cable driver and COM port status.
5.2.2 GPRS/SMS(Inserted Micro SIM Card) 5.2.2.1 To Query Terminal’s Basic Information Send commands Commands descriptions Premise of commands Parameters descriptions Relevant function descriptions Expectations returns 9 (700160818000,1,001,BASE,1) Query terminal version no no Returns the following message： 1. Terminal version 2. Alias of terminal ID 3. GSM model version 4. SIM card’s CCID 5. IMEI of GSM model 6.
7 Feedback descriptions 460,00,4243,6877 Internet information： 460means Mobile Country Code (MCC)，it represents China； 00 telecom operators network NO. （China Mobile--00，China Unicom--01）； 4243 Base station NO.---cell ID information； 6877 Location Area Code ---LAC information。 CELL ID and LAC is hexadecimal，which means 4243 transform into 16963 by decimal . See above 5.2.2.
Relevant descriptions of function Expectations return Feedback descriptions Items can setbe null If the backup IP & port no need to set, user-name and password will be the following： (700160818000,1,001,BASE,10,1,211.154.112.98,1088,,,CMNET,,) 211.154.112.98IP address: server address for uploading GPRS. PS: The first IP is master IP and the latter is slave IP. 1088 port: No. Of server port ; PS: The first IP is master IP and the latter is slave IP.
descriptions 5.3 Install Micro SIM Card Remove the device top side cover.
Insert Micro SIM Card, then recover the top side cover.
6. EnvironmentAdaptation Low temperature type battery Temperature: -40℃~55℃ High temperature type battery Temperature: -20℃~75℃ Humidity It can work for 48 hours under the testing of +50℃and 95% non-condensing humidity. Impact The device will be intact under the testing of half sine wave, 5G acceleration,pulse duration of 11ms by impacting three times from each axis. The device functions well during and after testing. Vibration Scanning range:5Hz–300Hz.
7. CoreParameters Basic parameters 1 5 Size 46mm*21mm*52mm Length of Lock Rope 300mm, with unique ID for each rope Weight about 67g Housing material Nylon Protection grade IP67 Working Temperature -10°C -- 45°C Storage Temperature -40°C -- +85°C Relative Humidity 5%—95% Working Current Av. current<100mA Standby ：<20uA Battery Capacity 1500mAh,3.
2G: GSM 850MHz/900MHz,DSC1800MHz,PCS1900MHz。 Communication Mbps: GPRS data downstream traffic: Max GSM 85.6kpbs GPRS data upstream traffic: Max 85.6kpbs Coding format: CS-1、CS-2、CS-3 and CS-4 Embedded protocol TCP GPS and Beidou are both supported GPS Track -167dBm Sensitivity Capture Beidou - 149dBm Recapture -161dBm GPS module Cold start -148 GPS L1 dBm Hot startFrequency Frequency 155dBm (1575.42MHz) Hot start <1s Start Cold start speed 35s(typical value) Accuracy <10 meters 1 6 BeiDouB1 (1561.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
