T-388 (US) User’s Guide
CAUTION Read this operating instruction carefully before using your T-388 two way radio, including the part on Product Safety and RF Energy Exposure Compliance Product Inspection TX / RX Icon Before initial use, please check if the product inside the box is in good condition or not. If there are any signs of damage or missing parts, please feel free to contact the carrier or seller.
Talk Button Belt Clip Kids can clip the units to their pocket or elsewhere while Press and hold this button to talk and let go to listen. they are on the go. Up and Down Key To select channels, set CTCSS code, adjust volume Call Tone Button By pressing button , you can inform other radio users level, listening volume and other usage. in your group that you want to talk or have finished Speaker/Mic/Charger Jack talking.
How to attach the strap to the belt clip Thread the strap through the hole on the belt clip; Thread the other end of the strap through the string, then pull it to secure (See Pic 3). RECEIVER The sensitivity Modulation receiver bandwidth Adjacent selective Intermodulation interference resistance Spurious response inhibition Audio output power Audio distortion ≤0.
namely, you cannot switch it to another channel under this status. To unlock the channel lock function, press MENU button again for about 2 seconds. Adjusting volume level Use the up/down key to increase or decrease the volume. And you can always find the volume level indicator in the lower right corner of the screen. Flashlight The radio is equipped with flashlight function, which will bring a lot of convenience in the dark. Press “LAMP” button to turn the flashlight on.
As to how to send the desired call tone to another party, please go and check “ Call another party” on Page. Using up/down key to select the code; Press TALK button to confirm the desired code and go back to normal mode. Note: T-388 can only work together when the units are tuned to the same channel and have the same CTCSS code on that channel. Channel Scan Convenient to detect channels with activities. When button is tapped, the radio will automatically scan for channels with activities.
Note When external earpiece is applied Please adjust volume level accordingly. Turn the radio off immediately if your ears feel uncomfortable or itchy with headsets on. Don’t use the units in places that might cause explosion or fire Such as gas stations, unshielded electrical installations and other unsafe places. If you want to continue the monitoring, please press MON button for at least 3 seconds. And press MON button again to stop.
Product Features Serial number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 7 Frequency Power 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.5W 0.
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION! requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your two-way radio has a RF Exposure Product Label.
only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules. harmful interference to radio communications.
equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; IC Requirements: Licence-exempt radio apparatus This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
•During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. •DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. •Portable Device, this transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn configurations.
Hand-held Mode(if applicable) • Hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least 2.5 cm (one inch) away from the nose or lips. The antenna should be kept away from the eyes. Keeping the radio at a proper distance is important as RF exposure decreases with increasing distance from the antenna. explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.).
earphones and headphones can cause hearing loss Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. Avoid Burns Antennas •Do not use any portable radio that has a damaged antenna.
MADE IN CHINA
该文档是极速PDF编辑器生成, 如果想去掉该提示,请访问并下载: http://www.jisupdfeditor.
该文档是极速PDF编辑器生成, 如果想去掉该提示,请访问并下载: http://www.jisupdfeditor.
说明书要求 尺寸:90*120mm 印刷:黑白印刷 装订:胶黏订 纸张材质:双胶纸 本页无需印刷