Dash camera User Manual Ver:1.
Pre-purchase instructions Thank you for purchasing our company's high-definition driving recorder. Please read this manual carefully before using it, so as to get the correct installation method and operation guide. This product adopts high-performance chip, provides ultra-high definition video, seamless dynamic picture, and supports 2K real ultra-high definition camera shooting. Please read this manual carefully and keep it properly before use.
may be inconsistent with the real thing. Please refer to the real thing, and the manual is for reference only. 一、Introduction to keys and functions 1. power key 2. Record/Confirm 3. 5. Switch/Down key 6. Horn hole key 7. Lens 8. Bracket key 9. Recording 10. Reset key 11.TF card slot 12. display screen hole 13. indicator 14. power supply 15. Power interface 16. light Power key /USB interface Menu/Mode/Lock 4.
★ Press this key briefly to turn on the machine when the machine is turned off, press the key briefly to turn off/turn on the screen when it is turned on, and press this key for 3 seconds to turn off the machine. Record/Confirm key ★ In standby mode, press this key briefly to start recording, and then press it briefly to stop recording. ★ Under the menu setting directory, press this key briefly to confirm the menu options.
press it briefly to exit the menu setting to return to the playback mode. ★ In the recording mode, press this key briefly to lock the current video. Record/Up key ★ Press this key briefly to turn on/off the recording in the standby/recording state. ★ In menu mode, press this key briefly to move the cursor up. Toggle/down key ★ In menu mode, press this key briefly to move the cursor down. ★ Dual-lens mode: Press briefly to switch the front and rear lens images.
Installing support ★ Fix the machine at the windshield by 3M glue bracket. Lens knob ★ Turn the lens up and down to adjust the angle of the lens. II. Installation Guide 1. Insert the memory card Insert the card: push the memory card straight into the card slot according to the direction indicated by TF card icon in the body. Remove the card: Push the memory card forward, and the card can be removed after it pops up. ★ This machine supports 8~128GB TF memory card, and the card speed is Class10 or above.
under the vertical angle of the lens; The horizontal direction of the lens is parallel to the ground. ★ Take out the power cord, open the fuse box to get electricity, connect the power cords B+ (yellow), ACC (red) and GND (black) to the fuse box, and connect the other end of the TYPE-C interface to the host. ★ After the power cord is connected to the car fuse box and this machine, put the power cord along the edge or fix it in the edge crack.
extension line along the edge or fix it in the edge crack. III. Basic operation instructions of camera shooting 1. start (the machine or engine) This machine has the function of automatic recording. After the car is started, this product will automatically start and start recording. The upper left corner of the screen shows the recording time. In the recording state, there will be a red dot flashing in the upper left corner of the screen.
This machine mainly has two modes: video recording and playback. It automatically enters the video recording mode after being turned on. After short pressing the "video key" to stop recording, long pressing the "mode key" can switch the playback mode, and the playback icon is displayed in the upper left corner of the screen.
parking monitoring and recording state.
★ Mobile phone can download "LuckyCam" in the APPlication market or scan the QR code below to download the app and install it; ★ Search for this machine through mobile phone WIFI (the name of the machine WIFI usually starts with NVT_), enter the password to establish a connection (the default password is 12345678), and open the APP on the mobile phone to see the real-time video screen of this
machine:
Video preview: After the App connects to the recorder successfully, when the recorder is stopped, click the "File" menu to enter the camera folder, and click the corresponding video to play the current video (note: direct preview will have video progress buffer) Download video: Click the download icon in the video list to download the video to be downloaded.
the download is complete, and the downloaded video is saved in the mobile phone download list. Preview: Click on the icon to display pictures of photos or video screenshots. Note: * The video played back by mobile phone is compressed. If you want to watch the original HD video, please download it from your mobile phone and play it or insert TF card into your computer to watch it.
Remarks: Post-recording video is an optional version, only suitable for recorders with post-recording, and the appearance pictures of post-recording cameras are for reference only. VI. Basic Settings 1. resolution: ★ One-way: QHD P30/FHD P30 (i.e. 2560*1440 P30/1920*1080 P30), the default QHD; ★ Two channels: QHD P30+FHD P30/FHD P30+FHD P30 (i.e. 2560 * 1440 P30+1920 * 1080 P30/1920 * 1080 P30), default QHD P30+FHD P30, select the corresponding resolution and click OK to switch the resolution. 2.
minute, (for example, if 1 minute is selected, the video saved by TF card is a video in 1 minute). 3. WDR: Off/On, on by default, which can effectively adjust the over-strong or under-weak light source to make the shooting effect clearer. 4. Gravity sensing: off/low/medium/high, which is set to "medium" by default, that is, when the collision sensitivity reaches the trigger value, the image during the collision can be locked to prevent it from being covered in the loop recording. 5.
back picture is a small picture. 9. WIFI: The default setting is "Off", select "On" or press and hold the up key to turn it on, and connect through the mobile APP. 10. Date/Time: select the pop-up date and time from the menu, and manually adjust the current date and time, or connect to the mobile APP setting menu and select time setting, and click "Auto Sync" to set the current date and time. 11. Key sound: off/on, the default is "on", that is, when the key is pressed, there is a key sound. 12.
VII. Parameter setting Hardware parameters: High definition 4 million CMOS professional Image sensor image sensor monitor 3.99 inch IPS HD display quick time MP4 format Loudspeaker external sound support operating voltage DC 5V TF card, the maximum support is 128GB, and storage the card speed is above C10.
Operating temperature (℃) (-10℃~65℃) Functional features: language Support for multiple languages Circular video recording support WiFi support Parking monitoring support Gravity induction support Recording function support Storage mode H.264/H.265 coding emergency power supply Super capacitor VIII. FAQ: Q1: What should I do if I forget the WIFI password of the recorder? Answer: The initial password of the recorder from the factory is: 12345678.
A: Regular formatting can effectively prevent data loss. Under normal circumstances, it is recommended to format TF card regularly every month. Please back up all data before formatting. Q3: How to format a memory card? Answer: In the host settings menu, click Format, and confirm the formatting is complete; When the mobile APP is connected to the recorder, enter the settings option-select the format option, and click the format button to confirm the format completion.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.