USER MANUAL P1000
Preface Thank you for buying this MID. Please read and retain all the operating instructions before operating the unit. 1. Avoid the unit being dropped. Avoid the display been shake seriously, or the display will be damaged or unusual. 2. Do not use metal object to touch the device to prevent it from short circuit. 3. Please backup your data in case your important data is lost, especially before you upgrade the firmware. 4. Do not disassemble.
II. Operation Instruction 1. Basic Operation 1.1. Power on/Power off Power on Press and hold the power switch for 5 seconds; the unit displays the start-up logo and enters the working mode. Power off Press and hold the power switch for 5 seconds to turn the unit off. Sleep While the device is at working status, press the power switch, it enters the sleeping mode, and the screen will be off then. Press the power switch again, it shift to the normal mode.
2.3. Screen Timeout Adjust the delay before the screen automatically turns off. Select “Display” in the setting interface. Click “Sleep” to enter, and click the time you want. Note: The setting of screen timeout is unavailable while playing video. 3. Wi-Fi connection Click “Settings” in the main interface.Click Wi-Fi to turn on the WIFI, it lists the open network it searched. Click the name of the network; it pops up the setting window. You may connect it to WIFI according to the prompts.
web address, you can browse the web then. icon to enter the bookmark to view the browse 5.2. Click the history. Click the web page you want to open it. 6. Audio and video playback 6.1. Audio playbackClick the “MUSIC” in the main menu to enter the audio playback interface. It lists the audio files in the device, and you may click the file name to play it. in the audio playing interface, click the icons to play/pause/ increase volume/ decrease volume/ FF/ REW…. 6.2.
8.2 DV position, the device is at DV mode. If the cursor is at Click to take video. Click to set the colour effect or restore to default settings. 9. Connect with external device 9.1. Connect with PC Connect the device with the PC via the USB cable. The PC appears two new disk symbols after connected successfully. One is the TF card, and the other is the built-in flash. 9.2. Applications For convenient usage, we installed some third party software in the MID.
External Capacity Audio Video E-book Wireless network Language OTG Temperature Power supply Battery TF-CARD, up to 32GB MP3,WMA,FLAC,APP,OGG,etc. MPEG4,asp,divx,WMV,H.264,etc. Support Support WIFI Multi-language Support -20°C to 60ι AC 100~240V 50/60 Hz; DC 5V/2A poly-lithium battery MEANING OF THE DUSTBIN SYMBOL Protect our environment: do not dispose of electrical equipment in your domestic waste.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for Changes or modifications not expressly approved by the party responsible for c compliance could void your authority to operate the equipment. ompliance could void the user’s authority to operate the equipment.