S4005L USER MANUAL
table of Contents 1. PRECAUTIONS ...................................................................................... 3 2. PARTS AND BUTTONS OF THE DEVICE .................................................. 5 3. TOUCH BUTTONS ................................................................................. 6 4. GETTING STARTED ................................................................................ 6 5. HOME SCREEN ....................................................................................
1. PRECAUTIONS 1)、On the Road Using a device while driving is illegal in many countries. Please refrain from using yourmobile while driving. 2）、Near Sensitive Electronics or Medical Equipment Don’t use your device near sensitive electronic equipment – particularly medical devices such as pacemakers – as it could cause them to malfunction. It can also interfere with the operationof fire detectors and other automatic-control equipment.
a toy as this is hazardous. 7）、Near Explosives Turn off your device in or near areas where explosive materials are used. Always obey local laws and turn off your device when requested. 8）、Emergency Calls To make an emergency call your device must be turned on and in an area where there’s network coverage. Dial the national emergency number and press “Send”. Explain exactly where you areand don’t hang up until help has arrived.
2. PARTS AND BUTTONS OF THE DEVICE 1. light distance sensor 2. Earphone jack 3. Micro USB and charging port 4. Receiver 5. Front camera 6. Volume button 7. Power button 8. Rear camera 9. Flash 10.
3. TOUCH BUTTONS The button moves back one step to the previous menu/page. The The button returns immediately to the main screen. button displays a menu of recently opened applications. （This interface adds a “CLEAR ALL” button);Long press into the Split screen interface The button will launch the applications and settings menu. 4.
micro-SIM card. Insert your fingernail into the slot at the bottom left of the back cover, and slidefingernail across bottom of back cover to lift it off. WARNING! To avoid damage to the phone, do not use any other kind of SIM card, or any non-standard microSIM card cut from a SIM card. You can get a standard micro-SIM card from your service provider. Insert the battery by aligning the metal contacts on the battery with th emetal contacts in the battery compartment.
5. HOME SCREEN The home screen will look similar to the picture below. To switch between screens, simply slide your finger left or right across the display. The home screen contains shortcuts to your most-used applications and widgets. The status bar displays system information, such as current time, wireless connectivity and battery charge status.
6.QUICK NOTIFICATION PANEL When you receive a notification you can quickly view it by following the below instructions. Slide your finger from the top of the screen down to the center to access Notification Panel to see your notifications. Drag the notification menu down to display the second fast access menu, the menu willlook similar to the below image.
Through this menu, it is possible to modify the functions such as brightness, auto rotation, Wi-Fi, Bluetooth and more. 7. SETTINGS MENU The settings menu allows you to adjust Tablet cellphone System Confguration. To Change Settings: 1. Touch the “Settings” menu icon on the Application menu. The Settings menu will open. 2. Touch a category title to view further options . 2.1.
• Data usage – Enable/disable mobile data, view current usage, set mobile data limit (note: this function is available only on devices supplied with 3G card functionality) • Hotspot & tethering - Including Usb tethering,Blutooth tethering and Wi-Fi hotspot. 2.2. Connected devices • Bluetooth – Connect or disconnect Bluetooth devices . • USB - Insert the USB line to use this menu. 2.3.
results, GPS satellites . 2.9. User & accounts • User - Switch between Owner and Guest; • Accounts – Add or remove email and Google™ accounts such as Gmail, Google. 3.0. System • Language and input – add to the dictionary, edit on-screen keyboard settings, vocal search, etc. • Date and time – Set date, time zone, time, clock format etc. •Backup– Backup and restore data, perform factory reset, etc. • Reset •DRM reset •Network setting reset- this will reset all network settings.
8. INSERTING/REMOVING SIM CARDS 1. When phone is powered off insert a SIM card by removing the SIM cover as illustrated above, insert your finger in the indent located near the charging port and unclip the SIM cover, then insert the SIM card. Please take note of the direction of insertion following the diagram on the phone’s SIM port. 2. After inserting a SIM card, turn on the phone and wait a few minutes for your phone to display Network information.
remove”. 4. Gently press the TF card to remove and pull out the TF card. 9. MAKING AND RECEIVING CALLS Once your SIM cards are installed turn on your phone and wait a few minutes for your phone to find a network. Then select the Call icon. Here you can dial a number or select a contact from your stored contacts list to call. You can also view outgoing and incoming calls that have been made, as well as adding or removing contacts. 10.
To answer a call – Slide your finger to the blue Call Answer key. To reject a Call – Slide your finger to the Red Call End key. 11.Send message Touch the Messaging icon to other mobile phone users to send SMS or MMS, enter the name or phone number in the "Type name or number" column, or select one from the contacts. Enter the information content and select send. 12.
Touchscreen The touchscreen responds to finger touch. Note: • Don’t place any object on the touchscreen for it may damage or crush the screen. Single Click: Single click one icon to choose the icon or option you want. Long Press: Press and hold an icon to delete or move an icon or app,and will display APP info 、Widgets、shortcut menu ect. Drag: Press the icon and drag it to a different screen.
Note:HOW TO CONNECT TO A COMPUTER 13. • Turn on your phone before connecting the phone to a PC by USB cable. 1. Use a USB cable to connect the phone with a computer. The phone will automatically detect a USB connection. 2. The USB connection menu will be displayed in the notification bar, select the desired USB operation. 3. The USB connection has been successful. 14. CONNECTION TO INTERNET Wireless: 1. Select “Settings”. 2. Select Network & Internet. 3. Select “Wi-Fi” and slide OFF to ON status. 3.
• When the phone detects the same wireless network in the future, the device will connect tohe network automatically with the same password record. 15. MOBILE DATA AND INTERNET Please Note: Cell Data may be turned “OFF” as a factory setting, to allow data to flow through your network provider please turn Data usage “ON” either from your quick drop down menu or in > Settings >Network & Internet >Data usage, you will not be able to access the Internet when Data usage is “OFF”.
16.BLUETOOTH Select “Settings”, select Bluetooth from “OFF” to “ON”. Search for the device you would like to pair with and select “PAIR”. You will see a message “Connected Successfully”. 17.
Touch the icon to enter camera mode and the interface is shown as follows: 1. Touch the icon 2. Touch the icon to take a photo. to start camera recording. 3. Touch the iconon the top right to see the previous picture and to delete, share or set it as a wallpaper. Click the return button to exit camera interface. 4. Touch the icon to switch from front to back camera.
18.TROUBLE SHOOTING How to Close Applications When an application is not responding you can manually shut the app down in “Running Services” menu. This will ensure the system responds as desired. Please shut down all idle applications to release memory and get the system speed back to normal. To close the application, click the icon on the shortcut bar to enter the systemconfiguration interface. Select the ApplicationRunning and the interface is Tap the application you want to close.
be powered down. 2. Press the reset button located under the power button with a sharp object and the device will be forced to restart. Restore Default Setting If you want to reset the phone to factory settings and erase all materials, please press Settings Backup and resetFactory data reset. WARNING: actory Data Reset setting will delete ALL your data and system configuration as well as any downloaded apps. Please use this function carefully. 19.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Warning: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
