@ BELL SOUTH CORDLESS TELEPHONE 900 MHz FILTERED SOUND™ WITH 40 CHANNEL AUTO SCAN Model MH9011 OWNER'S MANUAL i) INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS Make certain you receive the best ide CAREFULLY performance from your telephone. : : KEEP FOR YOUR Read this manual first. REFERENCE. For installation information, please ses “Getting Started” instructions an page 8 or your separate Quick Start guide.
HANDSET Controls HANDSET ANTENNA Pg.5 = VOLUME CONTROL “HL MID, LOW) SWITCH SCAN BUTTON Pg.5 Pg 513,21 ™ REDIAL BUTTON —n a FLASH BUTTON > Py5 IN HOUSEBOAT LOW Er INDICATOR | 0.5, Pg. 5, 14,15, 19 DED & TALK BUTTON PAUSE BUTTON [| = 14,15, MEMO BUTTON Pg. 5,16, 17 — TONE BUTTON Pg.5 ~— RINGER ON/OFF SWITCH Py. 5,14 ~, CHARGE CONTACTS Pg.5 For installation information, please see “Getting Started” instructions on page 8 or your separate Quick Start guide.
Special Features care, and by following the setup and user instructions in this manual, this unit will provide you with years of trouble free service. Bell South is committed to providing quality products that fit your needs. We would fiche 10 have any comments or suggestions you night have on this product. You may mall your comments to: U.S.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shack landlord injury, always follow these basic safely precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone 3. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Lie a damp cloth for cleaning. 4.
10. 11. 12. HANDSET Controls SCAN ('gain's) Button: Crass to change the operating channel when you hear interference. REDIAL (dial) Button: Press to REDIAL the last number you sidled. IN BATHHOUSE LOW LED Indicator: Lights up when the HANDSET Is in TALK mode. Blinks when battery charge is low. (See page 19 for detail) {memo} Button: Press to store phone numbers in memory or to call a number you have previously stored. PAUSE (pause) Button: Press to insert a PAUSE while dialing.
SHEW Lp oli del 1. open ho BASE UNIT Controls TELEPHONE LINE CONNECTION JACK POWER-IN CONNECTION JACK TONE/PULSE Select Switch ANTENNA: Raise or reposition for the best reception. IN USE/CHARGE LED Indicator: Lights up 10 indicate the unit is ON or when the HANDSET is placed on the BASE UNIT for charging, It flashes to indicate the PAGE function is In use. PAGE (F338) Bunion: Press to PAGE the HANDSET. Press again to stop. CHARGE TERMINALS: For charging the BATTERY PACK inside the HANDSET.
Getting Started Connecting Your Phone This section is a reference goods to the basic functions and operations ‘of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telethons from its shipping carton. H thees is any visible damage, do nol attempt to operate this equipment.
Desk Mounting Desk Mounting Ona of the special features of your telephone is the unique design of the MOUNTING BRACKET which can hold your thins at an angle of 30° when desk mounting. 5 | There are two positions to choose from: y ! 1. NORMAL POSITION (MOUNTING BRACKET not required): For normal position, as shown in Figure 1, place the BASE UNIT on any desired 4 rol poi ~— but suitable cation. TNS Press the (fal) button to confirm that « you have a dial tone.