User's Manual

1
HOME
2 3
4
5
6
1
3
2
4
Chapter 1 Internet Connection
Wireless Network Connection
Before you use the product,you need to connect the
product to the Internet:
Into the device Wi-Fi,wait for about one minute,then nearby Wi-Fi hot spots
can be
searched will appear in the
interface.
Choose your own Wi
- Fi access point.
Enter the Wi
-
Fi password.
Chapter 2 Basic Setup
Language Setup
You may choose the system language by following
these steps:
Home screen > Settings > language & input >language the default language
is English ,you
may choose your current language and confirm.
T
ime zone setup.
You should adjust the time zones according to your current location by the
following steps:
Home screen > Setting > date & time > select time zone choose your time
zone and confirm.
C
hapter 3 Precautions
1.projector mainly used to watch native video or online video,can not used
as a phone or computer.
2.If the remote can’t control the third - part
APP when using,you need use
USB mouse auxiliary operation.
3.Download the third - party video APP,please notice that you need download
TV edition procedures ,can’t download phone or other edition procedures.
7
Befo
re you use the projector, please read this user’s manual
carefully and keep it in reserve.
Important items
Important safety announcements
Don'
t install equipment in
a poorly ventilated area
Don’t install equipment
in hot and humid areas
Don't block the vent
(intake or exhaust)
Don't install equipment in
dusty or smoky areas
The names and functions of the components of the projector
focusing ring
keystone correction
ring
Return key
Signal source key
Enter / direction key
on - off key
Iens
Operate keys and
indicator light
interface
IR remote receiver
window
The names and functions of the components of the projector
SD card slot
USB interface
Audio output
interface
thermovent
Next song
Power key mute
Prev song Fast Forward
fast backward
Play/Pause
volume
HOME
Enter/ direction key
menu
reversal
volume+
Switch image
e
xit
channel selection key
Connect equipment and apparatus
：Direction of signal flow
SD card U disk
speaker headset
Installation and commissioning
Projector installation
The projector needs to be placed on a horizontal table, not high
on one side and low on the other
Horizontal placement
The hanger is not an accessory
Adjust focal length
focusing ring
keystone correction ring
Hanger installation
Schematic diagram
of anamorphose
keystone
anamorphose
Focus: When the image is blurred (as shown in the
right diagram), the focus ring on the fuselage can be
adjusted to obtain satisfactory image effect. If
satisfactory definition cannot be obtained through
adjustment, please move the product forward or
backward according to the actual situation.
Keystone correction: When the image appears
keystone anamorphose (as shown in the right
diagram), the user needs to use the "keystone
correction function" to correct the image to ensure
the im age is a standard rectangle.
Adjustment method: By adjusting the keystone
correction ring on the fuselage to adjust the physical
position of the lens, the keystone correction can be
achieved
Installation and commissioning
Projection distance reference
Projection
distance
Screen size Screen width X height projection distance
(inche) width X height(m) (m)
56 inches height 0.75 m width 1.33 m 1.7 m
66 inches height 0.87 m width 1.55 m 2.0 m
86 inches height 1.05 m w
idth 1.86 m 2.5 m
96 inches height 1.2 m width 2.13 m 2.8 m
Safety shutdowns
You can turn of
f the projector and safely
store the equipment by following these steps.
1. Press the key on the projector
operation panel or the
key on the remote
control to turn off the equipment according to
the system prompt.
2. Screw the focus ring into the equipment to
ensure that the lens is fully incorporated into
the equipment.
3. Store the equipment in a dry and cool
place.
Image fuzzy
Smart Projector
F350
FCC Statement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1)this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.