User's Manual

Wireless thermometer
YB918
Introduction
This is a professional remote food thermometer, it is a
programmable radio frequency food thermometer. Now you will
be able to remotely monitor the cooking temperature Food and
the temperature inside a grill, oven or smoker
Components
A. One Receiver unit
B. One Transmitter unit
C. Two Detachable stainless steel probeswith steel mesh cable
D. Four AAA batteries
Receiver
1
、
Liquid Crystal Display – Displays set temperature、Current temp、Meat、
Taste and timer.
2、Dual probe temperature display.
3、Programmable alert with preset temperatures for specific foods.
4、99-hour, 59-minute countdown time rand count up timer
5、Temperature range : 14˚F to 572˚F (-10˚C to 300˚C).
6、Temperature tolerance : +/-1.8˚F (+/-1.0˚C).
7、Battery ： 2 AAA batteries.
8、Stand – you can to stand the receiver on tabletop.
Buttons
1、 /SYNC: Press once to turn ON/OFF the receiver. Press and hold for 3
seconds to enter registration mode
2、PROBE/TIMER ： Press to select Thermometer Probe 1, Thermometer
Probe 2. Press and hold for 2 seconds to enter Timer mode. Press once to
return to temperature mode
3、Light /ºF/ºC：Press once to turn on or off the backlight,Press and hold for
2 seconds to select temperature readings in Celsius or Fahrenheit.
4、MEAT/ALART ： In thermometer mode, press to select the meat type:
PROG (program – User Self-Defined), GBEEF (Ground Beef), GPOUL
(Ground Poultry), BEEF, VEAL, CHCKE (Chicken), PORK, POULT (Poultry),
LAMB & FISH and Ham. Press and hold for 3 seconds to turn off the alarm
function, the alarm symbol disappears
5 、 TASTE/HI/LO ： In thermometer mode, press to select the meat taste
level: RARE, MED RARE, MEDIUM, MEDIUM WELL and WELL DONE.
In BBQ mode, press it to display HI or LO BBQ temperature.
In Timer mode, press to select Hour, Minute mode or Minute’ second” mode.
6、▲ – In thermometer mode , press once to increase the temperature value.
Press and hold for 2 seconds and the temperature value will increase at a
faster pace.
In timer mode, press once to increase Hour, Minute or Second setting. Press
and hold for 2 seconds, the hours, minutes or seconds will increase at a
faster pace.
7 、 ▼ – In thermometer mode , press once to decrease the temperature
value. Press and hold for 2 seconds, the temperature value will decrease at a
faster pace.
In timer mode, press once to decrease Hour, Minute or Second setting. Press
and hold for 2 seconds, the hours, minutes or seconds will decrease at faster
pace.
8
、
ST/SP/CLEAR– When setting the timer, press to confirm the setting.
When the timer setting is set, press once to start the timer. When the timer is
running, press once to pause the timer. Press and hold for two seconds to
clear timer setting.
Transmitter
● Liquid Crystal Display– displays temperatures of Four probes.
● Wire Stand – Allows you to stand the transmitter on tabletop or it can be
reversed and used as a hanger.
● Battery Compartment – holds 2 AAA batteries.
● Plug-in for stainless steel probe 1 、2、3、4.
Button
ON/OFF： Press once to turn on or off the transmitter.
LIGHT/ºF/ºC
：：
Press once to turn ON/OFF the Backlight,Press and hold
for 2 seconds to select the transmitter temperature display in ºC or ºF.
Synchronize Transmitter and Receiver
The transmitter and receiver were already paired。you do NOT need to re-
synchronize or re-pair the units.
The synchronization between the transmitter and the receiver won’t be lost
even if you replace the batteries.
Auto Off Feature
After the transmitter is turned on, if the temperature of the 2 probes is
lower than 50°C within 4 hours, it will automatically turn off without any
key operation.
The receiver will turn off automatically if it hasn’t received the temperature
signal from the transmitter for more than 30 minutes will shuts down. However,
the Auto Off feature will be automatically disabled if the timer is running.
Measure meat temperature
1、Press PROBE/TIMER to select Probe 1 or Probe 2, represented by a
small icon (PROBE 1 or PROBE 2) on the upper display.
2
、
Press MEAT to select meat type
。
3、 Press TASTE to select the level of doneness。
4、 Once the temperature of meat (Probe 1 or Probe 2) reaches the preset
doneness level, the receiver will beep and the LCD backlight will be turned on.
Press any button to stop the beep.