User Manual

Shenzhen JBT Smart Lighting Co.,LTD
Manual
Product Name: Control Box
Product parameters:Input:12VDC 1A
Frequency Range:2400MHz~2483.5MHz
Model:EW020
Product Features:
NO.
type
Features
1
button
Press and hold for 3 seconds to quickly enter the
network configuration mode.
2
After the network is configured, the light can be turned
on and the scene mode can be freely switched.
3
Double-tap to turn off the lights.
This control box is a control box used with LED light strips. It is mainly used to control the
network configuration switch and dimming of the lamps.
Steps:
Distribution network operation
1. Turn on the phone's Bluetooth and connect the phone to a 2.4GHz Wi-Fi network.
2. Press and hold the switch button on the controller for 3 seconds or switch it 3 times (on-0.5S
off-0.5S on-0.5S off-on), then the flood light flashes quickly (2 times/second).
3. Open and log in the Smart Life APP, click the add icon in the upper right corner.
4. Click [Auto Discovery], the phone will automatically search for devices.
5. After the addition is successful, click Finish to jump to the control page.
The other four distribution network modes of the product
1. APP pop-up window distribution network:
After the device is powered on and flashes to open the APP interface, it is found that the device
pushes a pop-up window to remind you to add the device network connection
2. Bluetooth manual add:
Power on the device and quickly open the APP to add a device interface Manually add a
Bluetooth device Click to search to find the device network connection