User's Manual

JW-1575 transmitter instruction

Illustration of picture

φ3.5Mm earphone jack(LINE IN)①；

the indicator light②；

OFF/CH1/CH2 selector button③；

press case④；

⑤push case；

battery case⑥

Illustration of function

(1) Modulation type：FM

(2) Transmission Frequency：this unit has two frequencies，channel 1（CH1）is

88.5MHz, channel 2（CH2）is 91.0MHz

(3) Transmission RD: 10 meter

(4) Battery for transmitter : 2¯1.5V AAA batteries

The install and replace of battery

(1) Press the ,and turn④ the to open the battery pack.⑤

(2) Install the 2¯AAA batteries according to the polarity after open the battery pack

(3) Close the battery pack, and push the to the original place,⑤ the will lose ⑤

automatically.

The operation of transmitter

(1) Plug the audio line into the at the back of transmitter,① the other part connect to

PAGE 1
JW-1575 transmitter instruction Illustration of picture ①φ3.5Mm earphone jack(LINE IN)； ②the indicator light； ③OFF/CH1/CH2 selector button； ④press case； ⑤push case； ⑥battery case Illustration of function (1) Modulation type：FM (2) Transmission Frequency：this unit has two frequencies，channel 1（CH1）is 88.5MHz, channel 2（CH2）is 91.0MHz (3) Transmission RD: 10 meter (4) Battery for transmitter : 2¯1.5V AAA batteries The install and replace of battery (1) Press the ④,and turn the ⑤ to open the battery pack.
PAGE 2
the (TV,Computer/CD/VCD/DVD/MP3) (2) Open the power of transmitter, turn the OFF/CH1/CH2 button ③, choose one, the indictor of transmitter will work. Notice (1) In any case of the bad voice, put the transmitter away the light. (2) Please replace the battery when the voice become weak. (3) When use the same transmitter, and more receiver working, please confirm the same type of receiver. (4) Please notice the volume in case of over-high or over-small (5) Please remove the battery when not use in long time.