User's Manual

Thank you for purchasing the QUB Works 2.4GHz Wireless Keyboard & Mouse, item RWK-01 . Included with your set is a USB Nano Receiver that can be stored inside the mouse itself, making it perfect for use with laptop computers and easy to
carry when traveling.. Please read this manual carefully FIRST in order to get the most out of your keyboard and mouse.
ITEM: RWK-01
USER’S MANUAL
INSERTING BATTERIES KEYBOARD AND MOUSE SETUP NOTES
In order to connect your keyboard and mouse to your computer, follow
the steps below:
1. Take the USB Nano Receiver from the bottom of your mouse.
2. Plug the USB Nano Receiver into an available USB port on your computer.
3. Make sure that both computer, keyboard and mouse are powered on.
In order to operate your keyboard and mouse successfully, you will need to
insert 2AAA batteries(not inclueded)into the keyboard and 1AA battery into
the mouse. To do so follow the steps below:
1. Pull the battery compartment covers off of both the keyboard and mouse,
revealing the battery compartment. The battery compartment covers are
located on the bottom of the mouse and the bottom of the keyboard.
2. Ineset 2AAA batteries into the batteris compartment of the keyboard and
1AA battery into the mouse, making sure to insert them with the correct
polarity (+,-) as shown on the battery compartment.
3. Once your batteries are properly inserted, you can put the battery
compartment covers back on the keyboard and mouse.
For best results always use new alkaline batteries when powering your
keyboard and mouse. Do not mix old and new batteries or different types of
batteries.
-The mouse will stop working once you pull the receiver out of the USB port
or the computer is turned off.
-You can store your mouse’s USB Nano Receiver underneath your mouse
making it even extra portable and easy to store when not in use.
Wireless keyboard