Instruction Manual

ManualsBrandsShenzhen Interthings Technology ManualsCamera & PhotoPan and Tilt camera

If the camera is failed to connect, it needs

to be reset.

To reset the IP camera, use the reset pin

to press the “Reset” hole on the top of

the camera.

Press and hold until the camera automatically

moving and hear the sound of ‘restore factory

setting’. It will take around 15 seconds.

If this is the first time using the app, an account need to be registered as below:

Instruction Manual

Rotative Camera

Model No. IPC167

1. Rotative Camera

2. Micro USB Charging Cable

3. Reset Pin

4. AC Charger

5. Screw + Anchors

1. After installing the app

‘Tuya Smart’, open the app

and follow the prompts to

setup the app.

Then tap ‘+’ or ‘Add Device’

from the home page.

Tap ‘Security & Sensor’, then

choose ‘Smart Camera’.

2. Power the device on and

hear the sound of ‘camera

start’.

Make sure your smart device

is connected to a 2.4G Wi-Fi

network, then tap ‘

Confirm

’.

Use your mobile phone or tablet to search for “TuyaSmart” in Google Play

(for Android OS) or in the Apple app store(for iOS) to find the app,

and install it according the instructions.

TuyaSmart

Mobile device system requirements:

Android OS 4.4 or higher

iOS 9.0 or higher

Preparations before use

3. The app will guide you to

scan mobile device with

the camera.

When you tap ‘Continue’

the mobile phone displays

a QR code.

Hold the camera 15 to 20 cm

in front of the mobile device

for the camera to scan

the QR code.

4. In connecting, make sure

your router, mobile and

device are as close as possible.

Once the camera get the

information from mobile

device, the camera will have

a sound ‘camera configured’

which means the camera

is connected successfully.

Your camera’s Live Camera

view with streaming video

will be openned.

Living Room

Using the Tuya Smart App

Live Camera View

Playback the Saved Files

a) Choose the device, get into

the live view, press the ‘playback’

(Only available when the micro

SD card is inserted.)

b) Users could review the videos

that have filmed by the camera.

c) Users could choose the date

to review videos.

1. Back to the home page

2. Device name

3. Settings

4. Wi-Fi signal

5. Switch to full screen

6. Image quality (SD/HD) switch

7. Speaker turn on/off

8. Record the view of the camera

(video saved to your mobile device)

9. Speak to the camera

10. Screenshot of the live

(photo saved to your mobile device)

11.Alarm (To turn on/off the motion detection

alarm or choose the sensitivity of the motion

detection.)

12. Direction of camera angle

13. Playback the local recorded video

(Feature only available after inserted a memory

card.)

14. Multi View for multi cameras’ live stream

showed on the monitor at once

15. Photo Album (To view the recorded images

which saved in your mobile phone through

the app)

Living Room

Device Name: Users could modify the device name.

Share Device: Users could share the device to your trusted-one.

Device Information: Users could see the device owner, IP

address, device ID, etc.

Use Echo: Instruction for how to work with Amazon Alexa.

Basic Function Settings: Indicator light on/off, Flip screen,

time watermark, speech method for one/two way talk.

Motion detection: User could switch on/off the motion

detection alarm and set the sensitivity of motion detection.

Memory card settings: Users could check the memory of the

card and wipe off the SD card memory.

Value-added Service Purchase: Cloud storage service for users.

(Subscription fee would be charged for this function.)

Feedback: Users could submit problems or advices to the

service provider to optimize the service.

Firmware Information: To view the information of current and

previous firmware version.

Remove Device:

a) When users want to change the internet connection, please

press ‘Remove Device’ and reset the camera to repairing with

new Wi-Fi.

b) No longer to use the camera.

Camera Settings:

Living room

‘More services’ supports you

to find the instructions

regarding the ‘Alexa’ ,

‘Google Assistant’

and ‘IFTTT’ features.

Motion detection

Living room detects motion detection

Review the ‘Alarm’,

‘Family’ and ‘Notification’

events.

Turn on/off the alarm of

‘Sound’ and

‘Push Notification’

Living Room

525X128MM

1. CDS sensor for night vision

2. Lens

3. Speaker

4. Micro USB

5. Micro SD Card Slot

6. Reset Button

7. Rubber Pad

8. Screw Hole

①

②

③

④

⑤

⑥

⑦

⑧

Connect the power supply

with the IP camera and you

will hear the sound ‘camera’

start.

Specification

Other features

Installation Wall hanging, desktop

Sensor 1/2.9” CMOS

Resolution 2MP, 1920(H)*1080(V)

Frame 1080P*15fps

Focal Length 2.8mm

Lens Angle 100°

Video Compression Format H.264

Compression Bit Rate 128 Kbps~2Mbps

Local Storage Yes, micro SD card (up to 64GB)

Cloud Storage Optional

Audio Two-way audio

Power Supply DC5V/1A

WiFi Antenna 2.4GHz

Operation Environment -10℃～50℃,30%～80%RH

Rotative Angle 360°(H), 180°(V)

Parts of the Camera

What’s included

Initial Setup

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

2. any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body