User Manual Model: H5179 Wi-Fi Thermo-hygrometer At a Glance 1. Ventilation Hole 2. LED Indicator 3. Hanging Hole 4.
Specifications Accuracy Temperature: ±0.3℃/±0.54℉ Humidity: ±3%RH Working Temperature -20℃ to 60℃/14℉ to 140℉ Working Humidity 0%RH - 99%RH Bluetooth-enabled Range 30m/49ft (no obstructions) Wi-Fi-enabled Range 50m/98ft (no obstructions) Using the Device Please take out the insulation sheet before using. LED Indicator Status Guides: Situation LED Indicator Status The device is powered on for the first time. Flash blue once. Connected to Wi-Fi. Flash blue every 60s.
Connecting to the Wi-Fi Network Notice: a. Make sure the Wi-Fi router supports 2.4GHz and 802.11 b/g/n bands; b. Turn on Bluetooth in your mobile phone. 1. Open the Govee Home, tap “+” icon in the top right corner and select “H5179”; 2. Follow instructions on the app to complete connection. 3. The LED indicator flashes blue every 60s once connection completed. 4. Please check the above steps and try again if connection failed.
Troubleshooting 1. Cannot receive alert notification. / Alert notification delayed. a. Make sure Wi-Fi signal is stable. b. Keep the device as close to the router as possible. c. Keep as few obstructions as possible between the device and the router. 2. Lost Wi-Fi connection frequently. a. Make sure the distance between the device and the router is less than 50m/98ft. b. Keep as few obstructions as possible between the device and the router. c. Check whether the battery is running low. Warning 1.
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
