User's Manual

User Manual
Multi-Function Mobile Phone Holder
1 Please push as the arrow direction to open in case of
force damage.
Push
360°
360°
360°
LOCK
Light Button 1
Light Button 2
Camera Button （On/OFF）
Product Parameter
Product Name: Multi-Function Phone Holder
Product Model: V6
Remote-control distance: ≤10M
Rated Input: DC5V/200mA
Fill Light Battery Capacity: 1000mAh
Remote Controller Battery Capacity: 50mAh
Main Material: Aluminum Alloy, ABS+PC
Stretching Friction Strength: 1KG-2.5KG
Enterprise Standards:Q/ZHZZ 001-2020
Working Temperature: -10°C~+40°C
Supported System: Android/ IOS
Size: 210X80X63mm
Maximum Extended Length: 1300MM
Net Weight：about 1126g
Gross Weight: about 1226g
灯光
灯光
How To Use
！
The product is in energy-saving mode when come out from the factory.
For the first time use, please long press the product one side two fill light button at the
same time for 2 seconds to activation，then use the product.
Fill Light Button (ON/OFF Button）
Remote Control Instruction
1.Power On
Long press the camera button for 2 seconds, the blue flash light
flash and product goes in to the pairing status.
2.Bluetooth Pairing
Turns on your phone Bluetooth function in setting, search the
product to recognize “DOXG-V6” and click to pair. The blue light
off after the device paired successfully.
The products without being paired with your phone within 300s will get in
to sleeping mode, press the camera button once to activate it.
(If your phone’ s volume button has been set for shutter, and you can’ t
use it properly, please download 360Camera or MeiTu Camera App etc.,
and set the volume button for camera shutter in APP Settings to take
photo.)
3.Recording Video/ Take Photo
After finish the Bluetooth pair, open the phone camera, press the product
camera button to take photos or record video and the blue light will blink
once.
4.Power Off
Long press the camera button for 2 seconds, the blue light flash and
product being turns off.
5.Sleeping Mode
If the device unused in 300s after being paired successfully, it turns into
sleeping mode, press the camera button once to activate it.
6.Take Photos
Press the selfie stick shutter button to take photo. Activate it first if the
device in sleeping mode.
Fill Light
7 light effects
White light: level-1, level-2
Yellow light: leve-1, level-2
Mixed-color light: level-1, level-2, Level-3
1.Turn on
Long press the light button 2s to turn on the light device, the light in white
light level-1.
Then short press the button to switch to others light effects by turns in
circulation.
2. Turn off:
Long press 2s, the light device turns off.
* Aim your remote at fill light infrared receiver when you use remote controller
to adjust the light.
Fill Light Working Time: 3-12h
3. Accessories:
V6 *1，User Manual*1， Charge Cable *1
Warranty
1.Please keep your service card or receipt safe for maintenance certificate.
2.Warranty period is 6 month since the acquisition date.
3.During warranty period, if there are any problems or malfunction about
this product in the case of normal use and maintenance, after verification,
we will provide free repair and component replacement.
The following situations are not included in warranty
We provide free repair and component replacement during warranty period.
Damage or malfunction caused by the following situations are not included
in warranty (even though during warranty period) , we assume no obligation
to provide free warranty.
1.Devices, components is beyond the warranty period.
2.Damage caused by abnormal use such as any use,maintenance or wrong
installation not according to the requirements of the product manual.
3.Damage caused by non-production manufacturer authorization server
disassembly.
4.Damage caused by accidents or man-made reasons (Error in operation,
scratch, transfer, bump, inappropriate voltage and current input, etc).
5.Damage caused by force major such as fires, floods and lightning.
Declaration of Conformity (FCC)
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’ s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The picture is only for reference, please make the object as the standard.
We reserve the right for final explanation.
Lock Handle
Reomote Control
Fill Light 1
Fill Light 2
90° Bending Part
Telescopic Tube
Phone Clamp
Fill Light Infrared Transmitter
Fill light Infrared Receiver
Charging Port
Indicator Light
Fill Light 1
Fill Light 2
Bluetooth（Take photo/Power Button）
Model：V6
Fill Light Button
Charging Port
Fill Light Button
Remote Control:
Appearance Description：
* 使用遥控控制灯光时，请对准红外接收口。
90° 弯折部件
锁定手柄
遥控器
补光灯1
补光灯2
伸缩杆
手机夹
补光灯红外接收器
灯光控制红外发射器
遥控器充电插口
指示灯
补灯光1
补灯光2
蓝牙（拍照/开关机按键）
型号：V6
灯光键（开/关机键）
充电插口
灯光键
（开/关机键）
遥控器:
外观说明：
使用说明
多功能手机支架
1 请前推打开，勿暴力开启！
推
360°
锁
360°
360°
一、产品使用
二、产品参数
产品名称：多功能手机支架
产品型号：V6 蓝牙作用距离：10M 内
额定输入：DC5V/200mA
补光灯电池容量：1000mAh
遥控电池容量：50mAh
主要材料：铝合金 /ABS+PC
伸缩摩擦力度： 1KG-2.5KG
企业标准：Q/ZHZZ 001-2020
工作温度：-10℃~+40℃
支持系统：Android、IOS
尺寸：210X80X63mm
拉伸长度：1300MM
产品净重：约 1126g
产品毛重：约 1226g
三、遥控说明：
！
产品出厂时设备处于节能模式，首次使用产品，请先同时长按产品
侧面两灯光键 2 秒，完成激活后再开机使用。
灯光键 ( 开 / 关机键）
1. 开机
长按遥控拍照键 2S 开机，产品进入配对搜索状态，蓝
灯快闪。
2. 蓝牙配对
打开手机蓝牙功能，搜索设备蓝牙识别代码“DOXG-V6”，
点击配对连接即可使用。当设备与手机蓝牙配对连接
成功后，蓝灯熄灭。
（如果手机设置音量键为快门还不能正常连接，请下载 360 相机或看图秀秀
等其中一种软件，在软件设置里面把音量键设置为快门后拍照。）
当产品开机后 300S 未能配对连接手机蓝牙，产品自动进入休眠状态，按拍
照键一次激活。
3. 视频录制 / 拍照
蓝牙配对成功后，打开手机相机，按一下遥控器拍照键，蓝灯闪亮一次，
拍下一张照片、或开始手机录像。
休眠模式下，先按拍照键激活，再次按拍照键拍摄照片。
灯光键 1
灯光键 2
拍照键
（蓝牙开 / 关机键）
4. 关机
长按拍照键 2S 蓝灯快闪并关机。
5. 休眠
当设备与蓝牙连接后，300S 无操作即进入休眠状态，休眠状态按拍照键激
活。
开灯：长按灯光键 2S 打开灯光，进入白灯 1 挡，产品共 7 个灯效：
1. 白灯 1 挡、白灯 2 挡
2. 暖灯 1 挡、暖灯 2 挡
3. 混合灯 1 挡、混合灯 2 挡、混合灯 3 挡
补光灯工作时间：3-12h
短按灯键依次切换循环 7 个灯光效果。
关灯：长按灯光键 2S 关灯。
四、灯光控制
包装内容：V6*1 说明书 *1 充电线 *1
* 说明书图案仅供参考，请以实物为准。
三包凭证：
1. 保修卡请用户妥协保管，以做维修凭证
2. 保修期限自购买之日起 6 个月内
3. 保修设备在保修期内，在正常使用和维修的情况下，机器本身机件材料及
功能出现问题，发生故障，经查验属实，本公司将提供免费修理和更换。
以下情况恕不免费维修
本公司的产品实行保修年限之内的有限保修属于下列情况的设备故障或损坏，
不在有限保修之列，本公司不承担免费保修义务；设备、部件已经超出了保
修期；客户未按照说明书要求，错误安装，保管及使用而造成的设备故障或
损坏；由非本公司授权机构、人员拆卸而造成的设备故障或损坏。因意外因
素或人为原因（包括如操作失误、刮伤、搬运、磕碰、输入不合适的电压和
电流等）导致的设备故障或损坏；因自然灾害等不可抗力（如地震、火灾）
原因造成的产品故障或损坏。
产品名称 联系电话
产品型号 购买地址
用户姓名 销售商名称
购机时间
合格证
检测员：
Pass
01 检
产品保修卡
（本保修卡仅适用中国地区）
材质：铜版纸
尺寸：8*11CM