User's Guide
When insert the plug into the power source, the machine will make a long“ beep” sound, indicating that the power is completed. The lighting at
the bottom of the POWER icon flashes slowly, that means the machine is in the standby mode; Touch the button once, the machine will
automatically turn on, and the machine is in VEG&HERBS mode.
NOTE: If there is not enough water in the water tank when the machine is turned on, you will hear a beep sound for 30 seconds. This is an
alarm sound to indicate that there is not enough water in the water tank. You can press any button or wait for 30 seconds to stop the beep
sound. When the icon flashes on the screen, that means you should add water and nutrient solution; At the same time, you may hear a
roaring motor sound. This is the normal working sound of the pump in an anhydrous state, and it can be automatically eliminated after adding
water.
Indoor LED Hydroponic System
Setup Guide
Included In Packge
Model IGS-36
Function & Control Description
Plant mode shift switch
Press once
Long Press
for 3 seconds
Pump mode indictor icon,
lighting is for working mode
and flash for 12hrs DND
mode.
Plant mode indictor icon,
lighting icon is for current
planting mode of device.
Water and plant food indictor icon.
lighting is for enough and flashing
and alarming for missing.
Power button
Plant days display
Environment
Temperature display
Indictor for network
Adjusted to setup mode of plant days
& Scan internet and mobile device
Assembly StepFAQ
Ratio & Method Of Nutrition
Function introduction
FCC Statement
1
2
3
4
5
6
7
8
9
14
1
Light panel assembly
Take out the device from the package.
Add an amount of
water with plant food
to the tank.
Put the sponges in the basket and
put the 2~3 seeds into the sponges kit
that you want to plant.
Cover the germination
cover and enjoy your
grown.
Connect the plug to the
corresponding socket.
Smart garden's name,
Can be rename it
by yourself
Smart garden's photo
Indicator for missing water and nutrition,
if missing will flash.
ON/OFF switch
Plant days display, day by day date
Plant mode switch button
Pump mode switch button, Operation for 24h
working and Do not disturb mode for 12h no
work and working after 12h
Automatic open the lighting time per day
Automatic close the lighting time per day
Current Date
cycle ON/OFF time of lighting,
Automatically calculated
according to the switch time
2
Extendable rod
3
Basket container
4
Plug at the filling nozzle
5
Water tank top cover
6
Water tank
7
Station of device
8
Control & Display pannel
9
Plug Adapter
10
Sponges *15
11
Basket Kit * 15
12
A Solid Nutrient
13
B Solid Nutrient
14
Germination Cover * 15
10 11
12 13
POWER
PLANT
PUMP
C / UP
POWER PLANT PUMP SETUPC / UP F / DOWN
F / DOWN
1. Why do only a few of the plants grow and once grown, they quickly wither?
a. The seeds you purchase make a diff erence. For best results, purchase seeds from reliable manufacturers and avoid purchasing
seeds that are not suitable for water hydroponic devices.
b. Ensure you are using the correct proportion of nutrient solution to water, LED light distance from the plants and temperature as
stated in the user guide.
2. Can sponges be reused?
It's reusable if pull out the stem of a plant, but we don't recommend doing so as it's not as good as
the first use.
3. Does it kill the plant to remove it from a sponge (if I want to move it to a pot, for example)?
Normally, it won't, you’d better wait until it's vigorous to improve survival rates.
4. Why the LED light can not be turned on?
Push or re-insert the rod down into the bottom until you hear a "Beep" sound, and then press the "POWER" button, the light will
be on.
5. How to clean the water pump?
Step 1. Turn the power off
Step 2. Remove the extendable rod and the top cover of the water tank.
Step 3. Take out the spo
nge in front of the water pump and rinse it with water. Any washing liquid will harm the nutrition balance.
(if it is very dirty, please rinse the water pump all together)
Step 4. Install those back and restart the machine.
When you press the Plant button, the red, blue and white LED beads will turn on and the indicator of this button will be on during the
working period.
The auto on and off timer works on a 24-hour cycle. When choosing the Plant mode, the hydroponic growing system will light on for 16 hours,
enter sleeping mode for 8 hours and will flash slowly. After that, the hydroponic growing system will automatically light on at the same time
the next day.
After pressing the Power button, the indicator of Pump button will be on at the same time and the pump will automatically enter the
working cycle of 30-minutes on and 30-minutes off. If you press the Pump button once, then the indicator of this button will flash and immedi-
ately enter 12-hours sleeping mode.After the sleeping mode is completed, the pump will enter the working cycle of 30-minutes on and 30-min-
utes off again.
In the standby mode, press button once, the temperature indication on the screen will switch to "Celsius" display；press again, a beep
will sound, and the temperature indication will not change.When you need to adjust the “PLANT DAYS” displayed on the screen, please press
once "SETUP" button first to make the number of planting days displayed in flashing state, and then press this button again, the number of
planting days will be changed.Each time you press it, the number of planting days will increase one day.
In the standby mode, press once, the number of "PLANT DAYS" on the screen will start to flash, and the number of
days can be manually adjusted. This number will flash for 10 seconds, then automatically stop flashing and confirm the
current number; or within 10 seconds of flashing , press the "SETUP" button again,the number of "PLANT DAYS" on the
screen will stop flashing and confirm the current number.
In the standby mode, Long press for 3 seconds , the “Indicator for internet” marker will start to flash for 3
mins,in this time ,you can scan this device on Smart Life app by your phone; if found and connected to APP ,this marker will
fast flash 3 times and the marker will be lighting immediately; if no found or connected to APP , the marker will disappear after
3
mins
.
In the standby mode, press button once, the temperature indication on the screen will switch to "Fahrenheit" display；press again, a
beep will be sounded, and the temperature indication will not change.When you need to adjust the “PLANT DAYS” displayed on the screen, please
press once "SETUP" button first to make the number of planting days displayed in flashing state, and then press this button again, the number
of planting days will be changed.Each time you press it, the number of planting days will decrease one day.
21
6
4
5
Plant Days ℃
℉
PUMP
Veg&
Herbs
Flower
&Friut
3
Plant Food
USER GUIDE
For Herbs ,Vegetables, Flowers And More
Full fill the bottle containing A
and B solid nutrient particles
with purified water,and shake
bottles to fully mix the content.
Use the cap of the bottle containing nutrient
particles as a measure ,and add 5ml A and
5ml B nutrient solution into each 1L water
(You can add the water according to the water
level marked in the tank );make sure the water
is stirred uniformly after the addition of each
solution.
Water
1L
2L
3L
4L
5L
Nutrient
5mlA + 5mlB
10mlA + 10mIB
15mIA + 15mIB
20mIA + 20mIB
25mlA + 25mIB
We suggest to change or replenish water/ nutrient
with same proportion every two Weeks.
1. Nutrient particles have storage life of 2 years in unopened bottles if
stored at the ambient temperature without exposure to sunlight.
2. Well-mixed nutrient solution prepared by adding water have storage
life of 5 months without exposure to sunlight.
3. If there is precipitation, it's a normal phenomenon.
Take out the protective jacket
Assembled to station
Adjusted to Celsius
Adjusted to Fahrenheit
Pump mode shift switch
SETUP
How to find and install Smart Life app
you can scan this QR code or APP STROE for installing Smart Life APP to mobile device.
Long press “SETUP”button for 3 seconds ,The device will make a long sound and come to“scan mode" for network,
the indicator line will flash for 3 mins.
Open the Smart Life app and follow the guidelines to setup the network .
POWER PLANT PUMP SETUPC / UP F / DOWN
— 1 — — 2 — — 3 —
— 4 — — 5 —
1 2
3 4
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
— 6 —