User's Manual

User Manual
Laser Bluetooth Earphones
Hear the essence of sound
Laser Run
Accessories
Earphones*1
User Manual*1
Replaceable Fins*3
Replaceable Gel Eartips*3
Charging Cable*1
S M L
S M L
Introduction
Power Button
Press and hold: Turning on / off
Press: Play / Pause / Answer / Decline
Press twice: Redial
1
M Button
Press: Turning on / off the Super bass
Press twice: Turning on / off the Laser
Press and hold: Turning on / off the mobile phone voice assistant
2
Indicator
3
Charging Port
4
Microphone
5
Laser Mode
With earphones turned on, press the M button twice to turn on/off the laser.
Super Bass Mode
With earphones turned on, the Super bass is not turned on by default (Auto-EQ).
Press the M button to turn on the Super bass, and it will prompt “Super bass on”.
In “Super bass on” mode, press the M button to turn off the Super bass,
and it will prompt “Super bass off”.
(The Super bass mode can be turned on only in the media playback state.）
Regular calls
Press the Power button to answer the incoming call.
Press the Power button to decline during a call.
Press the Power button twice to redial the last dialed number.
Three-way calling
When you are calling with A and B is calling in simultaneously,
press the Power button to reject B’s calling and hang up the A.
When you are calling with A and B is calling in simultaneously,
press the Power button twice to answer B’s calling and keep the A.
When you are calling with A and B in simultaneously,
press the Power button to hang up A and B.
When you are calling with A and B in simultaneously,
press the Power button twice to switch A to B or B to A.
Turning on the mobile phone
voice assistant
When connected with phone, press and hold the M button to turning on / off
the mobile phone voice assistant.
Connecting to Bluetooth device
The indicator light will flash slowly once your phone and earphones are
successfully paired.
With Bluetooth paired/connected, turn off the earphones by pressing and
holding the Power button. The indicator light flashes 3 times to indicate
power off.
Turn on the earphones by pressing and holding the Power button.
The indicator light flashes quickly to indicate pairing mode.
Turn on the Bluetooth on your phone and connecting to “Laser Run”.
Charging
The indicator light keeps on when charging, and goes off when fully charged.
Low Power
After 10 minutes of the low power indication, the low power alarm will
prompt you once every 1 minute.
If the power is less than or equal to 10%, the indicator light will
flash slowly with a flicker frequency of 3 seconds on and 3 seconds off.
Multipoint
Multipoint enables you to use
this earphones with two phones.
After pairing the second phone’s Bluetooth,
reconnect the Bluetooth function on the first phone.
After pairing to the first phone’s Bluetooth,
turn off the Bluetooth on the first phone.
Note
1. Read this manual carefully before use, and keep it proper for future
reference.
2. Please charge the power fully before the first time of using it.
3. Please keep the battery recharged during long term storage.
4. Do not use the charger without national CCC certification to charge the
earphones.
5. When the Bluetooth on your phone is unable to locate the “Laser Run”,
please confirm whether the earphones is under pairing mode. If it is not
paired or connected for a long time, the pairing function of the Bluetooth
will be turned off. Please restart the Bluetooth on earphones to enter
pairing mode.
Specifications
Dimensions Weight600mm 22g
Wireless
Connectivity
Wireless RangeBluetooth 5.0 10M
Battery Capacity Charging Time95mAh 2h
Music Play Time
with Laser
Turned-off
(80% volume)
Standby Time6.5h 4320h
Music Play Time
with Laser
Turned-on
(80% volume)
Single-laser
Turned-On Time
3h 4h
After-sales Service Rules
If there are any quality problems caused by artificial factors,
please return the product to us or the distributor for the warranty.
Warranty Card
Warranty Period:
The warranty period is 12 months after acceptance.
Free Warranty Service:
If any breakdown caused by the quality of the product itself, please
contact the distributor, as long as the product is still within its warranty
period, repair and adjustment is available complimentarily, subject to
present of the warranty card and shopping certificate.
Limitation of Warranty Policy:
1. Product without Warranty Card or undamaged Product Repair Label
are not covered by this Warranty Policy.
2. Damage due to any disassembling are not covered by this Warranty
Policy.
3. Damage due to operator’s misuse including water infusion, physical
damaging, are not covered by this Warranty Policy.
4. Damage due to any force majeure are not covered by this Warranty
Policy.
Customer Service Data：
Customer Name
Contact Number
Contact Address
Product Name
Purchase Date
Distributor
Maintenance Date
Made in China
Web: www.xbomb.cn
E-mail: [e-mail]