Installation Instructions

Smart Wireless Car Charger
Manual
Product Introduction
Thank you for ordering this device. It is a smart wireless car
charging phone holder, supports scanning and auto-tracking
coils to charging different brands smartphones. Make you easily
experience the fun of wireless smart digital products. Please
read this manual carefully before operating this device and
keep it for future reference.
Product structure diagram
1.Movable alignment wireless sensing area 2.Work indicator
3.Touch button 4.Type-C interface 5.Car air vent clip
6.Multi angle rotating ball 7.Fixing nut 8.Air vent clip nut
9.Air vent clip support
Instructions
Product parameters
1.Loosen the air vent clip nut, and
insert the clip into the air conditioner
blade
2.Rotate and tighten the Air
vent clip nut
3.Insert the Type-c data cable to
the port, the clamp arms will
automatically open.
Electric clamp arm, please don't take out the phone forcibly by hand
Touch the button on the top of the
car holder when necessary, the
clamp arms will automatically open
Memory function: after the first
coil alignment, it will charge
immediately if place the same
phone on the device
* Keep out of reach of children.
* Do not use under wet conditions.
* Please do not make any change to the product by yourself.
* Please avoid a strong collision of the product.
* Do not disassemble and repair the product if you are not a professional.
* Do not use external force to move the clamp arm.
* The product needs to be equipped with QC2.0/QC3.0 and other formally
certified car chargers to fit.
* The product uses the principle of wireless charging and capacitive sensing
to make charging more convenient.
* The product has a built-in battery. Please touch the button to open the clip
arm after charging for 5 minutes and disconnecting the power.
4.Place the phone on the holder,
the arm will auto close and lock,
and then auto-scanning the coil
and charging
1.Please put the rotary ball of the car phone holder into the fixing nut first;
2.Then press the rotary ball and nut into the car phone holder;
3.Finally, tighten the nut according to individual needs.
NOTE:
Installation steps
Air vent clip fixing method
Input:
Power:
Receiving distance:
Product weight: Bare metal 182g With clip 205g
The product has a foreign body detection function. It will affect
the wireless charging usage if equipped with ring holders, metal
objects, or other stuff that increases the phone thickness.