VTIN Wireless Music Receiver User Manual What is Included 1 X Receiver 1 X 3.5mm audio cable (m/m) 1 X 3.
1. Multifunction Button (MFB) 2. Next Song/Volume UP 3. Previous Song/Volume Down 4. Charge Port 5. Indicator 6. Microphone Specification Bluetooth Version: V4.1 Frequency Range: 2.4GHz Operation: Class2 Bluetooth Mode: HFP/ A2DP/AVRCP Bluetooth Range: up to 30 feets Charge time: 1.5 hours Playing time: Up to 8 hours Charging the Receiver You must charge the receiver fully before using the receiver for the first time. 1. Connect the receiver to the power source with USB charging cable. 2.
4. The red indicator light goes out when charging completed. Low-Voltage Alert: When battery low, there will be an alert sound, and red light will flash. Please charge it as soon as possible. Power on/off the Receiver Power on: Long press the MFB about 3 seconds until the blue and red indicator lights start flashing alternately. Power off: Long press the MFB about 3 seconds until the blue indicator light goes off. Pair to Your Phone 1.
7. If pairing is successful, the blue indicator light flashes slowly. 8. Now you can enjoy your music through the home stereo system or car stereo system. Note: 1. It will connect to the last paired phone automatically when it turns on. (Please make sure the Bluetooth function on your phone is on before turn on the receiver.) 2. If you want to use it in the car stereo system, you need to adjust the car radio to AUX in. Pair with Two Bluetooth Devices at the Same Time 1.
connect it. 8. Two phones will both connect the Bluetooth receiver at the same time. Answering/Ending/Rejecting a Call Answering a call: Press the “Answer” button on your phone or short press the MFB on your receiver. Ending a call: Press the “End” button on your phone or short press the MFB on your receiver. Rejecting a call: Press the “End” button on your phone or long press MFB on your receiver.
If you want to switch different phone to listen music, please pause the music of the first phone, and then play the music on the second phone, it will switch to the music of the second phone after a few seconds. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Contact Us: Website: www.ivtin.com Email: support@ivtin.
