® 14+ READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE X4 STAR FPV H507D USER MANUAL ARM/DISARM MOTORS, SEE PAGE 12 RTH FUNCTION, SEE PAGE 15 FOLLOW ME FUNCTION, SEE PAGE 16 TRANSMITTER CALIBRATION, SEE PAGE 22 01 ©2016 Hubsan 哈博森科技 版权所有
COMPASS CALIBRATION Compass Calibration is required after the binding as instructed on the transmitter. 1 ) Horizontally rotate the X4 in a clockwise direction when the LCD screen shows “Calib compass 1” 2 ) Put the X4 nose down and vertically rotate it in a clockwise direction when the LCD screen shows “Calib compass 2” 3 ) Calibration is completed when the 4 LED indicators remain solid.
Do not calibrate the compass in a strong magnetic field Do not carry ferromagnetic materials with you while calibrating the compass, such as keys, cell phones, etc. Horizontal Calibration Horizontal Calibration is required when the quadcopter drifts during flight. Calibration Procedures: Push the left stick to the most right side, and move the right stick from left to right quickly until the 4 LED indicators blink slowly. Calibration is completed when the 4 LED indicators remain solid.
Hubsan X4 User Manual V1.0 2016.05 IMPORTANT SAFETY NOTES OPERATION: Be extremely careful and responsible when using the Quad. Small electronic components can be damaged by crashes or by dropping into water. To avoid any injuries, do not use the quad with broken or damaged components. Maintenance: Do not try to fix the quad by yourself, please contact Hubsan distributors authorized by Hubsan for customer services. For more information, please visit official website at www.hubsan.
or Safety Advisory Notice for Lithium-Polymer (LIPO) Batteries LiPo batteries are different from conventional batteries in that their chemical contents are encased in a relatively lightweight foil packaging. This has the advantage of significantly reducing their weight but it does make them more susceptible to damage if roughly or inappropriately handled.
Contents Compass Calibration 0 2 Safety Notes 0 4 6 Advanced Performance Setup 6.1GPS POSITIONING/ hOME POINT SETTING 1 4 Information 6.2 RTH Mode 1 5 SYMBOL EXPLANATION 0 4 6.3 Headless Mode 1 6 USAGE ADVICE 0 4 6.4 Follow Me Mode 1 6 0 6 6.5 Failsafe Mode 1 6 Contents Introduction 1 Item List 0 7 2 LED Indicator Status 0 8 3 Quadcopter Battery 7 Transmitter 1 8 7.1 Key Function 1 9 7.2 Install TX Battery 1 9 3.1 Introduction 0 9 7.3 Reversing channel setup 1 9 3.
INTRODUCTION Thank you for buying the HUBSAN product. It is designed as an easy-to-use, multi-functional RC model, capable of hovering and acrobatic flight maneuvers. Please read the manual carefully and follow all the instructions. Be sure to keep the manual for future reference. Flight Weight: 164.5g (including prop protections & Battery) FPV:First Person View,this feature enables you to experience every live moment of the flight from the drone's point of view. 1.
2. QUAD COPTER MOTOR LED INDICATOR Indicator Status: Front LED is blue; Back LED is red. 1. Power on: 4 LED indicators blink simultaneously every 1.5 seconds. 2. Compass Calibration: 1). Horizontal calibration: 4 LED indicators blink circularly. 2). Vertical calibration: 4 LED indicators blink alternately. 3. Quadcopter Calibration: 4 LED indicators blink slowly. 4. GPS Flight: 4 LED indicators remain solid. 5. GPS Return : 2 front LED indicators remain solid, and 2 back LED indicators blink slowly. 6.
4. PROPELLERS The quad copter uses the 5.3-inch propellers which are marked by A and B. Propellers are consumables, please replace with new ones if there is any damage. Attach the propellers to the corresponding motors that are marked A and B,tighten the propellers and keep the motors deadlocked with the screw-driver. Black screw A Silver screw B Tighten the A propeller with black screw; Tighten the B propeller with sliver screw.
5. START TO FLY In case of any injuries caused by improper operations, it is advised that beginners learn to operare the quad under the guidance of professional.It is very improtant to choose the right flight environment. 5.1 FLIGHT ENVIRONMENT (1) The flying area should be open and is without tall buildings, otherwise the GPS may not work. (2) Do not fly in bad weather like windy, snowy, rainy or foggy days. (3)Stay away from obstacles, crowds, power cables, trees and water etc.
5.4 ARM/ DISARM THE MOTORS Arm the motors Method : Pull both sticks to the lower outer corner as shown on the picture to arm the motors. Release both sticks after the motors are armed. If the motors can not be armed after binding, please make sure: 1. Compass calibration is completed 2. The value of Fly When No GPS is “YES” 3. GPS switch and RTH switch is OFF.
Forward The Elevator stick moves the X4 forward and backward. Push the stick up the and the X4 will fly forward. Pull the stick down and the X4 will fly backward. When the stick is in the center, the X4 will hold its position. The angle of stick movement corresponds to the angle of tilt and flight speed. Backward The Aileron stick controls left and right flight. Push the stick to the left and the X4 will fly to the left. Push the stick to the right and the X4 will fly to the right.
5.6 PHOTO/VIDEO PHOTO VIDEO Insert the SD card into quadcopter before using Photo/Video function. Press the Photo button once to take photo. Press the Video button once to take video and press again to save the video. Stop recording before the SD card is removed. 6. ADVANCED PERFORMANCE SETUP 6.1 GPS POSITIONING/ HOME POINT SETTING 1.) GPS Positioning works ONLY when the GPS signal has no less than 6 satellites. 00:23:59 X4 7.3V R 0 P 0 H 247 0.3m/s 1.5m 0m 00:23:59 X4 7.3V R 0 P 0 H 247 0.
2.) Home Point is recorded when armed the motors with no less than 6 GPS satellites. 3.) You should be in an open place to search for the GPS satellites, it’ll take 3 mins to finish the searching, and the GPS signal strength depends on the flying environment. 6.2 RTH MODE (RETURN TO HOME) ENTER INTO RTH MODE Push the GPS Switch and the RTH Switch up, and the quad copter will enter into RTH mode. The flight control system will control the quad copter to fly back to the home point and land automatically.
6.3 HEADLESS MODE Headless mode means the X4 will default any directions (corresponding to the directions of transmitter sticks) as the up ahead when the mode is activated. MODE 2 MODE 1 Short press down the throttle stick to switch on/ off headless mode. Short press down the throttle stick to enter into Headless Mode, indicated by two "beep" sounds and the “HEADLESS ON” displays on the LCD screen.