® G P S WAY P O I N T X 4 S TA R W I T H A P P H507A PLEASE READ THE INSTRUCTION MANUAL CAREFULLY
IMPORTANT SAFETY NOTES OPERATION: Be extremely careful and responsible when using the Quad. Small electronic components can be damaged by crashes or by dropping into water. To avoid any injuries, do not use the quad with broken or damaged components. Maintenance: Do not try to fix the quad by yourself, please contact Hubsan directly or distributors authorized by Hubsan for customer services. For more information, please visit official website at www.hubsan.
Safety Advisory Notice for Lithium-Polymer (LIPO) Batteries LiPo batteries are different from conventional batteries in that their chemical contents are encased in a relatively lightweight foil packaging. This has the advantage of significantly reducing their weight but it does make them more susceptible to damage if roughly or inappropriately handled.
CATALOGUE SAFETY NOTES INTRODUCTION 1.Item List 1 2.LED Indicator Status 3.Quad Battery 3.1 Introduction 3.2 Installation 3.3Charging 4.Propeller 4.1Introduction 4.2Installation 5.X-Hubsan APP 6.Start to Fly 6.1Flight Environment 6.2Safety Checks before flying 7.APP Flight 7.1 Connect with APP 7.2Compass Calibration 7.3Map Mode 7.
INTRODUCTION Thank you for buying the HUBSAN product. It is designed as an easy-to-use,multi-functional RC model, capable of hovering and acrobatic flight maneuvers. Please read the manual carefully and follow all the instructions. Be sure to keep the manual for future reference. Quadcopter Weight: 162g(including protection) 1.ITEMS INCLUDED IN THE BOX (Check all the items in the box before using.
2. QUAD COPTER MOTOR LED INDICATOR Indicator Status: Front LED: is blue; Back LED: is red. 1.Power on: 4 LED indicators blink simultaneously 2.Compass Calibration: 1)Horizontal calibration: 4 LED indicators blink circularly. 2)Vertical calibration: 4 LED indicators blink alternately. 3.Quadcopter Calibration:4 LED indicators blink slowly. 4.GPS Flight: 4 LED indicators remain lighted. 5.GPS Return : 2 front LED remain lighted, and 2 back LED blink slowly. 6.
4.2 Installation Attach the propellers to the corresponding motors that are marked A and B,tighten the propellers and keep the motors deadlocked with the screwdriver. Black Screw 黑色螺丝 A “I”Mark Silver Screw 银色螺丝 B Tighten the propeller A with black screw; Tighten the propeller B with sliver screw. “D”Gap
6 START TO FLY In case of any injuries caused by improper operations, it is advised that beginners learn to operare the quad under the guidance of professional. It is very improtant to choose the right flight environment. 6.1 FLIGHT ENVIRONMENT (1) The flying area should be open and is without tall buildings, otherwise the GPS may not work. (2) Do not fly in bad weather like windy, snowy, rainy or foggy days. (3) Stay away from obstacles, crowds, power cables, trees and water etc.
NOTICE: For safety,please don't use the smart device for other purposes while it is connecting with Hubsan App. If you want to control the quad with other devices, please restart the quad. 7.2 Compass Calibration Compass calibration is required for the first use, otherwise the quad can't work properly. Do not calibrate the compass in a strong magnetic field to avoid interference. Keep calibrating the compass regularly to make sure the quad fly in good condition. (1).
EXPLODED VIEW 9
H502S Motor B 2 Propeller A 2 H502SMotor A 2 Propeller B 2 GPS 1 Blue LED 2 5.
H507A TROUBLESHOOTING 1. No GPS Signal ! Be sure it's for outdoors flight, and the flight environment should be open without tall buildings. 2. Altitude Hold & Positioning not work! Check if the quad is with more than 6 GPS satellites or not. 3. Can't take pictures and videos! ① Check if the Micro-SD card is inserted or not; ② Check if the Micro-SD card is formatted correctly or not (Format the MircoSD card before use, if the Micro-SD card is with FAT32, the card should be Class 4 or Class 4+) 4.
H507A SPARE PART CHART H507D-02 Lamp Base A/B Brown H502C-03 Screw H507D-03 Propeller A/B Orange H502-05 Motor A H502-08 Shaft Sleeve H502-10 Motor Gear B H507A-05 2.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
® www.HUBSAN.