® Ages 14+ Read the instruction manual carefully ITEM NO.
Hubsan X4 PRO V1.0 2015.01 Read the instruction manual carefully! IMPORTANT SAFETY NOTES OPERATION: Be extremely careful and responsible when use the X4 Pro. There are delicate electronic components, which can be damaged if you crash the X4 Pro or submerge it in water. Do not attempt to fly a damaged X4 Pro. Always inspect propellers for damage and proper tightness.
CATALOG 02 02 16 4 PREPARATION FOR THE SMART TX symbol explanation usage advice 4.1 Introduction 17 4.2 The installation of TX Battery 18 4.3 Start the transmitter. 18 CATALOG 03 GENERAL INTRODUCTION 04 4.4 Method to bind the Transmitter and x4 pro 19 1 ACCESSORIES INCLUDED 04 4.5 Introduction of the LCD 19 2 INTRODUCTION 05 4.6 Introduction of Antenna 19 PREPARATION FOR FLY PREPAR FOR USE 1.COMPASS CALIBRATION 1 PREPARE THE LI-PO BATTERY 20 1.
ACCESSORIES INCLUDED GENERAL INTRODUCTION Hubsan X4 Pro is a high-tech aerial video and photography quadcopter. It is equipped with a highly accurate and stable 3 axis gimbal, 1080P HD aerial photography camera, and advanced smart flight control system. The highly-integrated Android transmitter is capable of long distance camera control, video transmission, ground station auto flight, FPV flight, and social network sharing, etc. functions.
ACCESSORIES INCLUDED 11 Micro-USB cable 1PC To read the camera data 12 User Manuals 4PCS Disclaimer Hubsan X4 Pro Instruction Manual Camera Instruction Manual Parachute Instruction Manual 13 1080P camera １PC HD camera module 14 Transmitter Antenna １PC 5.8 GHz Transmitter Antenna 15 Video glasses １PC Video glasses (Not included. Purchase this optional accessory from Hubsan) Stand-alone system, can help 16 Parachute 1PC provide some safety after a loss of control. (Not included.
PREPAR FOR USE FPV Transmitter, equipped with 8 X AA battery(EXCLUDED) PREPARATIONS FOR USE Thanks for buying HUBSAN products! 1 PREPARE THE LI-PO BATTERY Make sure the following equipment is fully-charged before flight. EQUIPMENT SUPPLIED POWER Camera 3.7 V 650mAh rechargeable Li-Po battery X4 Pro with gimbal 11.1V 7000mAh rechargeable Li-Po battery Parachute 3.7 V 380mAh rechargeable Li-Po battery 1.1 LI-PO BATTERY IN THE X4 PRO The X4 Pro is equipped with a 11.
BATTERY (1) Overcharge protection Overcharging will damage the battery, charging will stop when the battery charge to 12.8V. (2) Over-discharge protection Over-discharging will damage the battery. The X4 Pro will cut off power when the battery power is 8.4V. (3) Short circuit protection Short circuit detection. The X4 Pro will power off to protect the battery. 1.
BATTERY 2 SAFETY NOTES 2.1 IMPORTANT NOTES This X4 Pro is not a toy. Any improper use of this product will result in serious injury. Be aware of your personal safety, the safety of others and your surrounding environment. We strongly recommend that beginners learn to fly with proper instruction from more experienced pilots before attempting to fly the X4 Pro for the first time. It is your responsibility to comply with your country's remote controlled and Unmanned Aerial Vehicle flight regulations! 2.
PREPARE THE X4 PRO 3 PREPARE THE X4 PRO 3.1 INTRODUCTION THE X4 PRO [1] [1] Propeller [2] [3] [2] Brushless motor [4] [3] LED light [5] [4] Shock resistance equipment [6] [7] [5] 1-axis gimbal [8] [6] 1080P camera [7] Undercarriage [8] Terrestrial magnetism [9] [10] [9] Battery compartment [11] [10] External interface [11] Parachute [12] [12] non-slip mat 3.1.
CAMERA Camera specifications Recording resolution 1920*1080 Full HD Battery 3.7VNj650mAh Recording frame rate 30FPS Working temperature 10Ḅ+70Ć Video format MOV Working humidity 30%Ḅ80% Image Sensor 3 million pixel Working power 1.9W Image pixel 2048*1536 pixel Standby power 1.33W Lens format 1/3” Storage temperature - 40Ḅ+125Ć Lens FOV 170 ᶮMAXᶯ Storage humidity 30%-90% MJPG [ 108&3 ] 3.2.
CAMERA Ɣ Power on the camera to copy from the SD card. The camera is only charging when the power is off and it is connected to the PC. The camera cannot record video when it is connected to a PC. Ɣ When you remove the camera USB connector from the camera when it is taking video, the camera will continue taking video. If not taking video the camera will automatically power off if USB connector disconnected from the camera.
PREPARE THE 1 AXIS STABLE GIMBAL 3.3 PREPARE THE 1-AXIS STABLE GIMBAL Features of the gimbal Control accuracy ±0.03° Control range Pitch angle:+90°~~ -90° Stabilized design Rotate automatically when the X4 Pro tilted to ensure stable shooting 3.3.1 INSTALL THE 1-AXIS GIMBAL Step 1: Take out the 1-axis gimbal from the box, position and connect the vibration damper with its mate. Step 2: Insert the gimbal signal wire into the right slot. Step 3: Insert the camera signal plug into the left slot.
PARACHUTE 3.4 PREPARE THE PARACHUTE Refer to THE PARACHUTE INSTRUCTION MANUAL The Hubsan X4 Pro has an optional automatic parachute system. The parachute is self-powered which means even when the X4 Pro Li-Po battery power is low, the parachute will still work. There is a sensor inside the parachute system that detects when the X4 Pro goes into an abnormal attitude and then immediately commands the parachute to open. Potentially the X4 Pro can then land safely and avoid causing damages. 3.4.
PARACHUTE Step 2: Install the parachute canister: Position the parachute canister into the brackets and tighten the screws. After the parachute set is positioned, open the middle screws to re-install the parachute cloth. (Refer to the Parachute Instruction Manual for more information) 3.5 INSTALL 5.8 GHZ TRANSMITTER ANTENNA Method: 1) aim to the antenna connector on the X4 Pro, fasten it in clockwise direction; 2) make sure the antenna is straight and in line with the undercarriage.
PROPELLER 3.6 PREPARE THE PROPELLER SET Hubsan X4 Pro equipped with 9 inch propellers--black and grey colors. The propellers are easily damaged. Please purchase spare propellers from Hubsan. 3.6.1 INTRODUCTION propeller A propeller B PROPELLER Diagram A Installation Position A A Symbol explanation LOCK: In this direction, tighten the propeller onto the motor shaft UNLOCK: In this direction, remove the propeller from the motor shaft 3.6.2 METHOD Take out the 4 propellers.
PROPELLER Ɣ &KHFN WKDW WKH SURSHOOHUV DUH FRUUHFWO\ LQVWDOOHG DQG WLJKW EHIRUH HYHU\ IOLJKW Ɣ &KHFN WR VHH WKDW WKH SURSHOOHUV DUH LQ JRRG FRQGLWLRQ 5HSODFH WKH SURSHOOHUV LI WKH\ DUH EURNHQ EHQW QLFNHG RU FKLSSHG Ɣ 'R QRW WRXFK RU EH FORVH WR VSLQQLQJ SURSHOOHUV RU PRWRUV WR DYRLG LQMXULHV Ɣ $OZD\V XVH +XEVDQ SURSHOOHUV WR HQVXUH EHVW IOLJKW H[SHULHQFH 3.6.4 PREPARE THE PROPELLER GUARD For beginners, we recommend that using the Hubsan X4 Propeller Guard to enhance flying safety.
