User' s M anual F20G-5S-LCD MADE IN HUAPTEC 1 / 20
Content WHAT IS INCLUDED .................................................................................. 3 1 HOW IT WORKS ................................................................................. 3 2 TOOL REQUIRED ................................................................................ 3 3 HOW TO INSTALL YOUR NEW CELLULAR BOOSTER ............................ 4 3.1 Overview ................................................................................... 4 3.
WHAT IS INCLUDED 1. 2. 3. 4. Booster F20G-5S-LCD Outdoor Yagi 9dbi Antenna & 50’5D Coaxial Cable Indoor Panel 7dbi Antenna& 50’5D Coaxial Cable AC/DC Power Adapter 1 HOW IT WORKS The cellular booster provides reliable two-way cellular coverage by improving signal strength in homes, buildings, offices, and other areas where cellular reception is weak or unreliable. The system amplifies the signal from the nearest cellular tower and retransmits at a higher power level within a local area.
3 HOW TO INSTALL YOUR NEW CELLULAR BOOSTER 3.1 Overview This guide will help you properly install your cellular booster kit. It is important to read through all of the installation steps before installing your equipment. Thoroughly read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment.
• BOOSTER – select location 1 •Install the booster in an area that is protected from the weather, properly ventilated and is away from excessive heat and moisture. • DONOR ANTENNA (OUTDOOR)- select location 2 •Mount the signal (outdoor) antenna in an elevated outdoor location so that it points towards the cellular tower and away from where the inside antenna will be located.
3.2 Plan the layout of your system Before you get started you will need to plan the layout of your system. This involves checking signal strength for signals coming from the cellular tower, as well as antenna, booster and cable placement. 3.3 Check for Signal Strength Select a location on the roof of the building to install the signal antenna, by monitoring your cellular phone’s signal strength (signal bars) to find the strongest signal from your carrier’s cellular tower.
3.6 Install the Server (Indoor) antenna Connect one end of the coaxial cable to the antenna and the other end to the cellular booster where it is marked “Indoor”. Select the installation location of your supplied server (outdoor) antenna based on the following: Omni Ceiling directional antenna Place in the center of the area where the signal needs to be amplified. Panel directional antenna Place in the outer perimeter of the area the signal needs to be amplified.
unusable signal quality can cause oscillation, this is why it is important to fully understand the LCD indications on your booster, as they will help you identify and solve any potential issues. The LCD indicates the status of the booster system. 4 UNDERSTAND THE PORTS, LCD and LED STATUS,MGC 4.1 Repeater ports 1) Outdoor port: connected with the donor antenna by cable. 2) Indoor port: connected with server antenna directly or by cable. 3) DC IN: connected with power supply. 4.
coverage. “Power dBm”– Power Indication. The displayed value shows real-time downlink power that the amplifier is delivering to the indoor antenna port. When the amplifier DL output power is lower than -10dBm, the value will display ”---”. “ISO” – Isolation Alarm Indication. When the system does not have enough isolation between the outdoor and indoor antennas, the “ISO” indicators will be flashing showing that the ISO is lowering the gain in some bands to keep the system from oscillating.
4.3 LED Status 1. Status and definition of Power indicator: Status Definition Green Normal Off DC power problem 2. Status and Definition of Alarm indicator; Alarm LED only works for downlink signals Status Meaning Solve methods Check coverage, leave as is if it's good; if Output power is not maximum. Green coverage is not good, increase downlink signal Level. Slow Flashing Green Full output power Working properly. Not working properly. Quick Flashing Green Output power is too high.
Not working properly. Quick Flashing Green Deep loop back or self-oscillation Check coverage. Leave it as is if it’s good. Actions must be taken if coverage is not good. Quick Flashing Red OFF Severe loop back or self- oscillation The booster automatically shuts off Not working properly, actions must be taken. for protection due to very severe self- oscillation.
When the LCD is in the alarm display mode, press the “SET” key and the LCD screen will display the alarm indication showing the affected band. Pressing the “INC+” (or “ DEC-“) key and the LCD will switch to help tips. If none of keys are depressed within 30 seconds, the display will return to the fixed display mode. If none of the control keys are depressed within 5 minutes, the LCD screen will turn off. Pressing any key will return the display to the fixed mode. 4.
5 UNDERSTAND THE ANTENNA 5.1 Donor (Outdoor) antenna The Yagi Lpda Antenna The yagi is a very precise directional antenna with a powerful reach. This antenna should be installed in an elevated position and must be pointed towards your carrier’s cellular tower. NOTE:This antenna is not meant to capture signal from multiple carriers. The Panel Antenna The panel is a directional antenna with a 120 degree reach and is designed to capture the signal from multiple carrier towers.
Outdoor Antenna & Cable Kit Options 2．Kit 11-100400 Yagi 11dbi Antennac& 100' 400 Coaxial Cable 3. Kit 11-7550 Yagi 11dbi Antenna & 75' 5D Coaxial Cable 4. Kit 11-100500 Yagi 11dbi Antenna & 100' 5D Coaxial Cable 5. Kit 10-3050 Panel 10dbi Antenna & 30' 5D Coaxial Cable 6. Kit 10-50400 Panel 10dbi Antenna & 50' 400 Coaxial Cable 7. Kit 10-5050 Panel 10dbi Antenna & 50' 5D Coaxial Cable 8. Kit 10-75400 Panel 10dbi Antenna & 75' 400 Coaxial Cable 9.
23. Kit 7-10050 Panel 7dbi Antenna & 100' 5D Coaxial Cable 24. Kit 5-30400 Omni 5dbi Antenna & 30' 400 Coaxial Cable 25. Kit 5-3050 Omni 5dbi Antenna & 30' 5D Coaxial Cable 26. Kit 5-50400 Omni 5dbi Antenna & 50' 400 Coaxial Cable 27. Kit 5-5050 Omni 5dbi Antenna & 50' 5D Coaxial Cable 28. Kit 5-75400 Omni 5dbi Antenna & 75' 400 Coaxial Cable 29. Kit 5-10400 Omni 5dbi Antenna & 100' 400 Coaxial Cable 30. Kit 5-7550 Omni 5dbi Antenna & 75' 5D Coaxial Cable 31.
14. Kit 3-50400 Omni 3dBi Antenna & 50' 400 Coaxial Cable 15. Kit 3-75400 Omni 3dBi Antenna & 75' 400 Coaxial Cable 16. Kit 3-100400 Omni 3dBi Antenna & 100' 400 Coaxial Cable 17. Kit 32-50400-50 2 Omni 3dBi Antenna & 50' 400 Coaxial Cable & a 50 Ohm 2-Way Splitter 18. Kit 33-50400-50 3 Omni 3dBi Antenna & 50' 400 Coaxial Cable & a 50 Ohm 3-Way Splitter 19.
them. The signals travel like rays of sunlight, a directional antenna will send the signal in the direction that it is pointing. An omni directional antenna will send the signal in every direction around it. So depending on your equipment it’s important to be sure that your Indoor antenna is not sending the signal back into the outdoor antenna. THINGS TO CHECK WHEN EXPERIENCING WEAK CELLULAR SIGNAL 1. 2. 3. 4. 5.
9 Warning and Statement Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
10 Specification F20G-5S-LCD RF Parameter 700MHz Lower(A+B+C) 700MHz Upper C Frequency Cell800 Range PCS1900 AWS2100 700MHz Lower(A+B+C) 700MHz Upper C Band width Cell800 PCS1900 AWS2100 700MHz Lower(A+B+C) 700MHz Upper C Max .Gain Cell800 PCS1900 AWS2100 LTE (A+B) LTE C Max .Output CDMA Power PCS AWS MGC ( Step Attenuation ) Inter-modulation 9KHz~12.75GHz Spurious Emission 9KHz~12.
FURTHER INFORMATION ON SIGNAL BOOSTER END-USE REGISTRATION The following is currently active contact of US wireless provider for booster register. https://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp https://www.sprint.com/legal/fcc_boosters.html https://www.verizonwireless.com/solutions-and-services/accessories/register-signalbooster/ https://support.t-mobile.com/docs/DOC-9827 https://securec45.securewebsession.com/attsignalbooster.com/ SHENZHEN HUAPTEC CO.
