“沿DOST Boost Your Bars User Manual F12G-5S-IoT F08G-5S-IoT
NOTE: This manual contains important safety and operating information. Please read and follow the instructions in this manual, failure to do so could be hazardous and result in damage to your cellular booster.
Package Content Product Image Product Name Mini Zoom Model Number FOBG-5S-IoT F12G-5S-IoT Coverage size 500-2,000 Sq. Ft. 800-3000 Sq. Ft. Indoor Cable Outdoor Cable Indoor Antenna Outdoor Antenna 30 Ft. Low-Loss HiBoost 200 Cable 50 Ft. Low-Loss 30 Ft. Low-Loss HiBoost 200 Cable HiBoost 200 Cable Indoor Wide-Band Directional Panel Antenna Outdoor Wide-Band Directional Antenna Warning: Un-authorized antennas, cables, and/or coupling devices are prohibited by new FCC rules.
Troubleshooting Guide Eliminate ISO LED Indicator Quick Flashing Blue, Quick Flashing Red problems: 1. Adjust the outdoor antenna direction, keep it away from the indoor antenna restart the booster 2. Increase the vertical or horizontal distance between the outdoor antenna and the indoor antenna - restart booster 3. Use metal or wall barriers to increase the isolation between the indoor and outdoor antennas - restart booster 4.
H"1oosT If you have any issues installing your HiBoost Booster, please contact our technical support team. Online Support: Create a ticket or chat via Signal Supervisor App Phone: (972) 870-5666 (M-F from 9 am - 5 pm) Email: support@hiboostusa.com Website: www.hiboost.
FCC and ISEDC Statements FCC RF EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instruction for satisfying RF exposure compliance. This transmitter must not be co located or operating in conjunction with any other antenna or transmitter. This equipment should be installed andoperated with minimum distance 20cm between the radiator& your body.
H"1oosT signal-booster/ https://support.t-mobile.com/docs/DOC-9827 https://securec45.securewebsession.com/attsignalbooster.com/ ISEDC Statement: This device complies with innovation, Science, and Economic Development Canada licence RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Technical Specifications Specifications working Band Band12(17)/Band13/Band5/Band25(2)/Band4 UL Frequency Range(MHz) 698-716/776-787(for FCC)/824-849/1850-1915/1710-1755 698-716/777-787(for IC)/824-849/1850-1915/1710-1755 DL Frequency Range(MHz) 728-746/746-757(for FCC)/869-894/1930-1995/2110-2155 728-746/746-756(for IC)/869-894/1930-1995/2110-2155 Supported Standards CDMA,WCDMA,GSM,EDGE,HSPA+,EVDO,LTE and all cellular standards Max.
SAFETY AND WARNINGS •Turn AC power OFF at the main circuit breaker before working on any electrical connections. •All AC power wiring and coaxial cable wiring must conform to local or national codes. •The AC rated input power must be within 10% of the voltage requirements of the device. •When grounding the system, a solid copper conductor no smaller than 8 AWG should be used. •DO NOT connect a ground wire to a gas supply line. •DO NOT open the booster. Touching internal parts could cause injury or damage.