User manual Model: CUBOT S1 Brand: CUBOT
Product activation (first usage) 1. For first usage, make the thimble of the charger wire contact the bracelet end with a contact, and insert the USB into a charger, mobile phone or computer for activation. Charger wire CUBOT S1 Smart Bracelet 2.
Wear the bracelet 1) Wear the bracelet on your wrist. If you wear it all day long, you are suggested to wear it at the place one finger wide below your ulna. Ulna 2) If you intend to accurately measure your heart rate by using any S1 bracelet, you may shift the bracelet to your upper wrist, namely the place three fingers wide below your ulna. The bottom heart rate sensor shall cling to your skin and movement shall be avoided.
which affects correct heart rate signals. Touch 1.The bracelet will be lightened by touching its screen, and all functional interfaces can be viewed by sliding horizontally.
2. All functional interface displays Time, date, battery level Heart rate Main interface of exercise Music control UV light display Atmospheric pressure, temperature, elevation display APP download and installation 1. Make sure that your mobile phone is connected to mobile Internet or WLAN; 2.
finished. And a Bluetooth icon will appear on the time interface of the bracelet; 2) In case you have bound any smart bracelet and need to bind another S1 bracelet, you shall unbind other bracelet before binding any S1 bracelet. Press the button on the APP to pop up a sidebar. Click “Setup management” menu to enter the device management interface. Click “My device” to pop up the device selection interface.
Synchronize data by pulling down any place outside the running step circle Heart rate measurement 1. Wearing method and instructions 1) Wear the bracelet at the rear of the joint at the back of your wrist to make the optical sensor behind the bracelet and your skin have good and stable contact; 2) The bracelet is at the rear of the joint at the back of your wrist; if your wrist is thin, you may wear the bracelet at a higher place (i.e.
4)The bracelet can be worn as an ordinary one when the heart rate monitoring function is not used; 5) Your heart rate can be viewed and the heart rate monitoring function can be used in exercise mode. 2. Heart rate measurement Each S1 bracelet has two ways for measuring heart rates: real time heart rate measurement and all weather heart rate monitoring: 1) Real time heart rate measurement can be simultaneously controlled from the bracelet and the APP.
moment, it will display real time heart rate measurement values; turn off real time measurement by clicking “Turn off measurement” on the APP; 2) All weather heart rate monitoring Enter the sidebar of the APP, select the “Device management” menu to enter the device management interface; turn on the “24-hour monitoring” switch to start all weather heart rate monitoring function; the bracelet will automatically and repeatedly monitor heart rate in a while, and it will upload the collected heart rate data to t
Exercise type Icon of heart rate Heart rate section Warm-up X≦50% Fat burning 50%85% Resting heart rate 4.
box to set up your heart rate prewarning value. You can set up your maximum heart rate as per the above calculation method; when your heart rate reaches the heart rate zone in the above table, the bracelet will display a corresponding icon; when any actually measured heart rate reaches or exceeds your maximum heart rate, the bracelet will display an icon and vibrate for reminding. 5.
cycling and climbing stairs; if the bracelet is bound with the APP, you can also view real time and historical exercise data on the APP. Exercise icon interface Exercise main It means there is any submenu Number of steps Calorie Distance Exercise subinterface Stopwatch Automatic display and viewing of number of steps, calorie and distance, etc.
previous or next song on your mobile phone. Music icon Previous song Next song UV Switch to the UV interface on the bracelet; click the UV icon to start measurement; any current UV index will be displayed by clicking the icon once. UV icon Sun protection grade Sun protection factor You can also view detailed UV information on the APP.
Atmospheric pressure 1) The bracelet can automatically acquire current atmospheric pressure, temperature and elevation for you to understand current geographical conditions and weather conditions so as to make your exercise plans in a more effective manner. 2) Switch to the atmospheric pressure interface on the bracelet, and it will display current atmospheric pressure, temperature and elevation.
quite long, the bracelet data may lose or even have a zero clearing before it synchronizes with the data in your mobile phone). Basic parameters Product model: CUBOT S1 Net weight:24g Display mode:OLED display screen Battery capacity: 85mAh Ingress protection:IP65 Battery type: Lithium polymer Synchronization method: Bluetooth 4.0 Operating temperature: -10℃~50℃ Device requirement: mobile phones with IOS8.0 and above versions; mobile phones with Android4.3 and above versions and Bluetooth4.0.
5. Do not expose the bracelet to any place with high moisture, extremely high or low temperature for a long time; 6. Do not use any corrosive detergent to clean your bracelet; 7. Do not use the bracelet in any environment with strong electromagnetic interference; 8. Do not let your children or pets use the bracelet, or any suffocation may be caused by swallowing any small part; 9. Do not use the bracelet in any sauna or steam bathroom; 10.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
