User Manual of CL7206B8A RFID Reader Shenzhen Hopeland Technologies Co.
Catalogue Catalogue............................................................................................................................................................................................ 2 1. Technical Specification................................................................................................................................................................... 5 1.1 Feature...................................................................................................
4.2 Common failure analysis and solution............................................................................................................................... 13 5. Package.......................................................................................................................................................................................... 14 5.1 Package..................................................................................................................................
1. Technical Specification 1.1 Feature CL7206B8A is a high performance UHF RFID device integrated 6dBi circular antenna and reader all in one. Supports ISO18000-6C/6B protocols. The work frequency includes China standard dual frequency 920MHz ~ 925MHz and 840MHz~845MHz, FCC 902MHz ~ 928MHz and ETSI 865MHz ~ 868MHz.
Power adjustment: 1 dB step-by-step Reading distance: 0 ~8meters (depending on tags, antennas and environment) Channel bandwidth: <200 KHz RS232 serial communication rate: 115200bps (default), 19200 bps, 9600bps RS485 interface communication rate: 115200bps (default), 19200 bps, 9600bps Support: Wiegand 26, 34, 66 interfaces Power adapter: AC input 100V ~ 240V, 50Hz ~ 60Hz DC output: 24V/2.5A High protection grade: IP54 1.2.
2. Sketch map 2.1 Physical construction Image 2-1 Structure diagram of CL7206B8A Size: 164mm×164mm×49.6mm 2.2 Weight Main body: 0.7kg(accessories excluded) 2.
Image 2-2 I/O & communication interfaces of CL7206B8A The interface description: 1 -- power interface 2 -- indicator light (WIFI or BT antenna) 3 - RS232 interface 4 -- I/O interface 5 - RJ45 interface 2.3.1 Indicator light status description LED is a green light-emitting tube, which is always on when the device is started, flashing when it reads card(at an interval of 200ms), quick flashing when wiegand communicates (without regularity), and always on when stop reading.
2.3.2 I/O interface chart Image 2-3 I/O interfaces of CL7206B7A The I/O interfaces control signal definition Pin No. Pin description Pin definition 1 relay #1 output port OUT_R 2 relay #1 output port OUT_L 3 External signal input IN 4 Wiegand output signal 0 WG0 5 Wiegand output signal 1 WG1 6 Ground IO_GND 7 White-brown RS485 positive 8 brown RS485 negative 2.3.
switcher or router through the network cable, or directly connected with the PC network interface, refer to below picture.
3. Installation 3.1 Notes To ensure the normal and stable operation of the device and your personal property and safety, please carefully read the following notes before install CL7206B8A reader: 1. Firstly, check whether the power socket ground terminal is connected to the ground, and to see whether the local power supply voltage is in accordance with the applicable voltage range of the reader; 2. Check the device and the external connection if is closely connected; 3.
The device provides special adapter cable, including interface of network, serial, USB and power; RS232 interface is for short distance communication (less than 5m), through the DB9 connector and the PC serial port connection to realize the communication of PC and the device. RS485 interface used for long distance serial communication (less than 80m) RJ45 network port used for long distance communication (less than 80m), connect PC with extend cable. 3.
4. Common failures 4.1 Daily maintenance The routine maintenance of CL7206B8A usage: ☆To check if the reader power line connection is reliable 4.2 Common failure analysis and solution Power supply system failures: Check whether the power adapter is normal, and the AC supply voltage is between 100V ~ 240V. The panel indicator light failed when power on: Check whether the communication is normal, if it’s not normal, please contact customer service.
5. Package 5.1 Package Imag5-1 Carton box size Carton box size: 362 mm×250mm×106mm 5.2 Accessories In order to facilitate the storage and transportation in near future, the packing box and the packing material should be kept properly after unpack.
Table 5-1 Package list NO. Name Qty Unit Remark 1 CL7206B7A integrated RFID Reader 1 set Included 2 Power adapter 24V/2.5A 1 Pcs Included 3 AC power cable 1 Pcs Included 4 Network cable 1 Pcs Included 5 RS232 cable 1 Pcs Included 6 Fixed screw M5*8 plated with nickel 4 Pcs Included 7 connection terminal 1 Pcs Included 8 Warranty card 1 pcs Included 9 Certificate of approval 1 pcs Included 5.
6. After-sale service Letter to Customers Since our aim is to continuously improve our products for better user experience, we may modify the product characteristics, composition and design of circuits without given notifications. Thus the real product may be not in accordance with this manual. Generally, we will provide timely amendments to this manual. If it’ s not provided timely, please consult our service department. Shenzhen Hopeland Technologies Co., Ltd. Email: support@hopelandrfid.
Guarantee card of Shenzhen Hopeland Technology Co.,Ltd Product Name Model No. Product Code Level Description of troubles User ’s name Contact person Postcode Contact no. Address of factory: Block 3 of CLOU Electronics Industrial Park, Baolong Industrial City, Longgang District ,Shenzhen, Guangdong, China Customer service centre: +86-755 36901035 Warranty Description: In order to offer users better service, our company provide warranty card with each device, please keep it to enjoy the service.