Touch Switch User Guide 1 2 1 1 2 3
A WiFi Router with internet and WiFi access has to be ready. DHCP setting is enable in your WiFi router. Your smart phone or tablet device is iOS or Android system. Your smart phone or tablet device must have access to APP STORE, GOOGLE PLAY or QR code scanner. Your smart phone or tablet device can connect internet if you need remote access.
1 Parameters Input 100-240Vac 50/60Hz Net work 802.
ACN Input ACN Input ACL Input ACL Input L1 Output L2 Output ACL Down Output ACL Up Output L3 Output 3 Channels Touch Switch(EU) ACN Input ACL Input L1 Output Curtain Touch Switch(EU) ACN Input ACL Input L1 Output L2 Output 1 Channels Touch Switch(US) 2 Channels Touch Switch(US) 2
ACN Input ACN Input ACL Input ACL Input L1 Output ACL Down Output L2 Output ACL Up Output L3 Output 3 Channels Touch Switch(US) Curtain Touch Switch(US) 3 Installation 3.1 Install APP into smart phone or talbet device . 3.2 iOS : search and install “iWiFis”from APP STORE or scan the iOS QR code. 3.3 Android: search and install “iWiFis”from Android STORE or scan the android QR code.
4 iWiFis App User Guide Settings Wi-Fi Wi-Fi 4.1 Connect WLAN iWiFisxxxxxx before opening App in Settings menu. iWiFisc57d31 CHOOSE A NETWORK... 100what Network settings Network settings 4.2 Select the WLAN router SSID and input router password. The iWiFisxxxxxx will disappear after connection done and one new device will be found in app. (IOS:Input WLAN router SSID and password.
4.3 User can input the name and set the device options in new device menu. Enable/Disable finding device option is to set finding the device by mobile phone or tablet in WLAN. Enable/Disable remote access option is to set remote security. New device Change to picture one touch key Device IP address:192.168.1.101 Enable finding device Enable remote access Enable finding device Enable remote access Beep Position device Change remote access password Testing Enable beep 4.
4.5 Click to open timer menu, then click touch switch status based on timer setting. to add timer.
4.6 Click to add scene. The function can preset the touch switch devices and their status. Then one button can set different status for all devices in this scene.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.