Bluetooth Touch Switch User Guide 1 2 1 1 2 3
1 Parameters Input 100-240Vac 50/ 60Hz 1-Channel (Resistive) Max Load 10A Encryption Type 2-Channel (Resistive) 3-Channel (Resistive) 5A×2 Channels 3A×3 Channels Motor 300W Bluetooth 4.0 Mesh Operating Temperature -20°C to 55°C 2 Wiring Diagram Warning: Ensure the power to your house has been switched off at the mains. To do so simply switch the main power circuit breaker to the off position in your service box.
ACN Input ACN Input ACL Input ACL Input L1 Output ACL Down Output ACL Up Output L2 Output L3 Output 3-Channel Touch Switch (EU) ACN Input ACL Input L1 Output Curtain Touch Switch (EU) ACN Input ACL Input L1 Output L2 Output 1-Channel Touch Switch (US) 2-Channel Touch Switch (US) 2
ACN Input ACN Input ACL Input ACL Input L1 Output ACL Down Output L2 Output ACL Up Output L3 Output 3-Channel Touch Switch (US) Curtain Touch Switch (US) 3 Restore Factory Setting 1-Channel Touch Switch (EU/ US) Long press 1 for 5 seconds to recover factory settings! 2-Channel Touch Switch (EU/ US) Long press 1 for 5 seconds to recover factory settings! 3-Channel Touch Switch (EU/ US) Long press 1 for 5 seconds to recover factory settings! Curtain Touch Switch (EU/ US) Long press fo
4 Installation 4.1 Install the app on your smart phone or table device. 4.2 iOS: Search for and download the “iBLEs” app in the APP Store or download it directly by scanning the iOS QR code below. 4.3 Android: Search for and install the “iBLES” app from the Google Play Store or download it directly by scanning the android QR code below. iOS Android 5 iBLEs App User Guide 5.1 Connecting your Bluetooth Device With Bluetooth on your mobile device switched on, run the iBLES App.
5.2 Add Device Devices Click to find devices. New devices will begin to populate the list. Select and pair the devices.
5.3 Accessing the Functions Menu Devices Once device has been paired, the user may view the functions menu by swiping across on the device in the main menu list. 1CH Touch Switch 5.3.1 Edit Devices Edit Devices Once in the functions menu the user may click on the edit button button followed by the menu to: - Change device name - Synchronize time - Test Device - Delete device.
5.3.2 Add/ Edit Group Edit Group Once in the functions menu (ref 5.3), click on to add group. The user may click on the edit button to delete the group or modify the group name. Click “Select Device” to add devices to your new group. Group 1 NOTE: One device can be stored in up to 4 groups. Once this is exceeded the device will no longer appear in the “Select Device” listing for future groups. Select Device Try me! 5.4 Add/ Edit Timer Click button to add the timer function.
5.5 Add Scene Click to add scene, then click scene name or delete the scene. Scene to edit Click Select Device to select devices and preset status. NOTE: The user may set the device status in the “Select Device” menu by clicking on the left most section of the select option.
5.6 Control/ Edit Scene Scene Click the scene icon to view or set the preset status of the devices in this scene. Long press the scene icon to edit or delete the scene. All Off 5.7 Data Synchronization Export data to SD Card. (For Android App only) All On Import Data Import data from SD card. (For Android App only) Import data from WLAN - Prior to proceeding, ensure that the 2 mobile devices are connected to the same WLAN and are running the iBLEs app.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
