Bluetooth Mesh 40W LED Driver User Guide SMART LED DRIVER
1 Module Features HLD503-B-CT is a 40w constant LED driver embedded bluetooth mesh module.It works with cct or dimmable panel, downlight celling light. 2 Environment and Electrical Parameters Parameters HLD503-B-CT HLD503-B-SC Input power 100-277VAC 100-277VAC Channels 40 Channels 40 Channel Output Current 950mA MAX 950mA MAX Output DC 24-38V 24-38V PF > 0.9 > 0.9 EFFICIENCY Max 85% Max 85% Wireless frequency 2.4GHz 2.
Wiring Diagram WACL CACN V+ CCT Downlight HLD503-B-CT ACL C- ACN V+ Ceiling HLD503-B-SC 4 Restore Factory Setting Step 1. Power on and wait 2seconds. Step 2. Power off, and wait above 3seconds. Step 3. Repeat 1st step and 2nd step 3 times. Step 4. Then power on, light will keep flashing.
5 Installation 5.1 Install the app on your smart phone or table device. 5.2 iOS: Search for and download the “iBLEs” app in the APP Store or download it directly by scanning the iOS QR code below. 5.3 Android: Search for and install the “iBLES” app from the Google Play Store or download it directly by scanning the android QR code below. iOS Android 6 iBLEs App User Guide 6.1 Connecting your Bluetooth Device With Bluetooth on your mobile device switched on, run the iBLES App.
6.2 Add Device Devices Click to find devices. New devices will begin to populate the list. Select and pair the devices.
.3 Accessing the Functions Menu Devices Once device has been paired, the user may view the functions menu by swiping across on the device in the main menu list. CCT Light 6.3.1 Edit Devices Edit Devices Once in the functions menu the user may click on the edit button button followed by the menu to: - Change device name - Synchronize time - Test Device - Delete device. NOTE: If the time on the bluetooth device is different from that of the mobile device, the timer function will not operate accurately.
6.3.2 Add/ Edit Group Edit Group Once in the functions menu (ref 5.3), click on to add group. The user may click on the edit button to delete the group or modify the group name. Click “Select Device” to add devices to your new group. Group 1 NOTE: One device can be stored in up to 4 groups. Once this is exceeded the device will no longer appear in the “Select Device” listing for future groups. Select Device Try me! 6.4 Add/ Edit Timer Click button to add the timer function.
6.5 Add Scene Click to add scene, then click scene name or delete the scene. Scene to edit Click Select Device to select devices and preset status. NOTE: The user may set the device status in the “Select Device” menu by clicking on the left most section of the select option.
6.6 Control/ Edit Scene Scene Click the scene icon to view or set the preset status of the devices in this scene. Long press the scene icon to edit or delete the scene. All Off 6.7 Data Synchronization Export data to SD Card. (For Android App only) All On Import Data Import data from SD card. (For Android App only) Import data from WLAN - Prior to proceeding, ensure that the 2 mobile devices are connected to the same WLAN and are running the iBLEs app.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
