LED Interactive Multi-Touch Display User Manual V901.20140901Please properly keep the manual for further reference. This is the general user manual for all interactive panels. Therefore, it may be different from the actual product.
Table of Contents NOTICE.................................................................................................................................................................... 4 Mounting Requirements.........................................................................................................................................5 Bearing..........................................................................................................................................................
Setting........................................................................................................................................................... 45 Time.............................................................................................................................................................. 45 Parent Control...............................................................................................................................................46 ECO Mode............
NOTICE Install or place components of which power supply voltage is high enough to cause personal injury in places out of the reach of children. Do not use any types of power cables other than the one provided together with the product to prevent the product from being damaged. Do not open the enclosure unless you are a professional maintenance engineer to prevent an electric shock. Check if the electric supply voltage complies with the product’s receiving power supply before use.
Mounting Requirements Bearing You can choose the potable or wall mounting method according to your needs. Wall mounting can substantially save the space. If you choose portable mounting, use the mounting rack or support. If you want to use a self-made mounting rack, the bearing capacity of the rack should be at last four times of the actual weight of the display.
Figure: * See CAS 132-2006 6
Introduction Thank you for buying Interactive touch screen. As our latest independently developed and produced human-machine interactive products, the Interactive touch screen are multi-functional teaching displays for interactive teaching, digital demonstration, multi-media presentation, touch operations and handwriting. They are well designed and produced to meet needs of education applications, and provide a user-friendly experience, digital intelligent control as ideal apparatus for modern education.
Outer Appearance Right loudspeaker Control panel Left loudspeaker (Front view) OPS computer Rocker switch Interface panel (Left view) (Rear view) Interface panel (Front view) 8 (Right view)
Control panel 1 1]. HOME: Open the Android home page. 2]. RETURN: Go back or return to the parent menu. 3]. MENU: Show or hid menu. . 4]. ECO: Switch over to ECO, Auto or Standard mode. 5]. SOURCE: Show or exit from the list of signal sources. 6]. VOL+: Increase the volume. 7]. VOL-: Decrease the volume. 8]. PC Pwr: Turn on/off the OPS computer. 9]. Touch port 1 only supports 2m USB cable.
Interface Panel 10
Functions of Remote Controller 1]. 2]. : On or standby : Mute 3]. 0--9: Select TV channel or enter number 4]. : Open the Android home page. 5]. : Go back or return to the parent menu. 6]. : Show or hid menu. 7]. : Show or exit from the list of signal sources. 8]. : Enable Alone mode. 9]. : Freeze. 10]. : Up/Down/Left/Right direction buttons 11]. : Confirm. 12]. : Capture screen shots. 13]. : Show the current signal source. You cannot show it in Android. 14].
Basic Operation Start Up Power the interactive panel with a 100-240V 50/60Hz AC power supply. Connect the panel to the power supply. Switch on the rocker switch (on the left of the rear of the panel, next to the power cable port) to enter the standby status. The power LED turns red. Press Power on the control panel or Standby on the remote controller to turn on the interactive panel. The OPS computer is started. The power LED turns green.
Software Installation Recommended configuration: CPU: Inter (R) Core i3 2.27GHz or AMD CPU with equivalent performance Memory: 1GB Hard drive: 1GB Graphics card: supports DirectX 9 or above If the interactive panel is equipped with the latest version of handwriting software in the PC before being delivered, please skip the step. HID drive-free function only applies for Vista, Windows 7or higher version (realize the functions of multi-touch etc.).
Software Calibration To work normally, the handwriting of the projected image on the touch LCD display should coincide with the actual one so as to calibrate accurately. The following situations need calibration. When you first use the interactive LCD panel; Re-install the drive program; When you connect the panel to another PC; The handwriting panel adopts nine-point calibration method. The position process is described as follows: 1. Connect the display and run the drive program; 2.
4. Use the pen to click and hold the center of the flickering cross. Do not release it until the flickering cross moves to the next positioning point. Complete the calibration process as instructed. After it completes, you will return to the desktop automatically.
Positioning Method for Windows 7 1. Connect the interactive panel to PC using the USB lead via the USB interface on the panel; 2. Select Tablet PC Setting on Control Panel. 3. Select on the setting window.
Use the pen to click and hold the center of the flickering cross. Do not release it until the flickering cross moves to the next positioning point. Complete the positioning process as instructed. Click Yes after it completes. Hits & Tips To ensure the handwriting accuracy, use the pen provided together with the interactive panel rather a finger to perform calibration. Calibration errors may cause touch functions of the interactive panel fail. In that case, please perform positioning again.
Assemble OPS Computer Insert OPS computer into the slot and fasten it with two M4 screws on the left and right. Note: The OPS computer is not plug-and-play. Disconnect the interactive panel from the power before inserting the OPS computer. Smartbar The smartbar has three modes: Home Page, White Board, and Remarks. Under any of the three modes, you can click on the toolbar to go back to the previous page and click to exit from other programs or go back to the home page from other signal sources.
In programs other than the white board, the smartbar is in the Remarks mode. You can select a pen, line and color to add notes and remarks on the file opened (including image, PPT and PDF). (Remarks mode) Note: Click on the right to hide the toolbar. Scroll down with your finger to show the smartbar.
The following figure shows the interface when a SD card is inserted into an all-in-one interactive panel. Click the SD card preview window to open the SD card interface. Click on the upper left corner of the home page to show tools, clock, calendar and calculator. Click at the bottom to hide tools and go back to the home page.
Task Manager In the task manager, you can view currently running programs, switch and end programs. Click the task manager as shown in the following figure: to enter View running programs In the task manager, scroll left and right to view currently running programs. Switch programs In the task manager, click a program to switch over to the program.
End programs In the task manager, click a program and scroll up and down to end the program, or click a program and hold it for several seconds to show a prompt box. Click Remove from List to end the program. White Board The white board provides the writing function. In the white board program, you can select a pen, line and color to write and use eraser to erase content on the white board. You can also print and clear the content on the white board.
New White Board and Setting Click and select New Page, Overview, Delete All or Settings from the menu. Click Settings to set the color and shade of the white board. Pen/Line/Color If you want to use marker, click and hold If you want to use highlighter, click and hold for two seconds to set the line and color. for two seconds to set the line and color.
Eraser If you make an error or want to erase something, click to use the eraser to erase the content that you want to erase. Cancel Click to cancel operations. Capture Click to capture the content on the white board and save it as an image under the Screenimage directory. You can open the directory through the following ways: (1) Go back to the home page and click on Smartbar to enter the file manager. Find folder Screenimage in the file system.
Gallery You can enter the album to view images one by one or as slides. Click on Smartbar to enter the album to show all folders containing images. Click a folder to show images contained in the folder. Single image Click one image in a folder. Scroll left to show the previous image and right to show the next. Under the single image mode, you can click icons on upper right corner of the image to delete, cut and edit the image.
Slide Click on the upper right corner of the folder and select Slide to view images as slides. File Manager In fire manager, you can copy, print and view files in the system. Click on Smartbar to enter the fire manager interface and show the file system. It also shows files in portable devices such as SD card and flash disk.
Copy Click one file or tick off Multiple and choose several files. Click to copy selected files to the portable device.
Print Click to open the preview page. Click to set the printer. Click number of copies to be printed. Click and to set the to start printing. View Click to open a file. You can view files including images, music, word, PPT and PDF. System Settings Click on Smartbar to enter the system settings page, which includes options including Volume, Date and Time, Network, Input Method, Printer, Language, Clear Screenshot, Auto Brightness, and About Android.
Set Time/Date Click Date and Time to enter the time/date setting interface. Click Using 24 hour format. When it is grey, it is 12-hour system. You can click AM or PM. When it is green, it is 24-hour system. Click Auto Update. When it is grey, you can modify the time and date. When it is green, the time and date will be automatically updated by the system.
Net State Click Network to show the Network status, Ethernet, WI-FI and Proxy settings. Choose a network connection method and set parameters accordingly. LAN setting If the panel is connected with LAN cable and supports Dynamic Host Configuration Protocol (DHCP), the system will automatically configure the network protocol (IP) value.
If you want to manually set the network protocol, enter the IP address, default gateway, and DNS server parameters on the software keyboard or remote controller. Slide / to select the subnet mask to be changed. After setting, click < on the upper left corner or Back on the remote controller to go back to the parent menu. Click × to close the current page. WIFI setting When WI-FI is enabled, the system will automatically search available WI-FI access points (AP). You can choose an AP on the list.
If you select an AP with safety authentication, you need to enter the password on the software keyboard on the safety authentication interface. After setting, click < on the upper left corner or Back on the remote controller to go back to the parent menu. Click × to close the current page. Proxy When the proxy server is enabled, you can enter the master and proxy server port numbers on the software keyboard or remote controller.
Click AOSP and configure functions as follows: 33
Click Google inputmethod and configure functions as follows: Printer Click Printer to show the printer setting interface. Enter the name, type and IP of the printer. After setting, click < on the upper left corner or Back on the remote controller to go back to the parent menu. Click × to close the current page.
Language Click Language to show options including Chinese (Simplified), Chinese (Traditional), and English. Select a language. Click < or Back to return to the parent menu. Click × to close the current interface. Clear Screenshots Click Clear Screenshots to show options including One Month, Two Months, Three Months, Six Months, and Twelve Months. Select a period. Click < or Back to return to the parent menu. Click × to close the current interface.
Auto Brightness Click Auto Brightness to show options including Time delay and Real-Time. Click Time-Delay and auto brightness adjustment will be delayed for five minutes. Click Real-Time to enable auto brightness adjustment immediately. Click < or Back to return to the parent menu. Click × to close the current interface.
Restore Default Setting Click About Android to show the following interface. Click Reset. Click OK to restore the default setting. Click < on the upper left corner or Back on the remote controller to go back to the parent menu. Click × to close the current page.
Browser Click on Smartbar to open the web browser. Enter a website and keywords to search on the software keyboard or remote controller.
Programs Click on the Smartbar to enter the program interface and show all programs in the system.
Calculator Click to enter the calculation page. Click numbers and characters on the keyboard. Clock Click to enter the clock page. Click Start to start timing and Stop to stop it.
Music Click to start the music program. The system will display songs in the local disk by artists, albums, file names, playlist and playing status. ES File Click to open ES File. You can copy, cut, delete, move and rename files.
Select an image to display and on the upper right corner of the interface. Click right corner of the interface to select a file and click to select all files. Temperature Measuring Click to measure the temperature of the panel. Select Signal Channel There are three ways to select a signal channel: 1.1 Press Signal on the remote controller. 1.2 Press Signal on the control panel of the interactive panel. 1.3 Click in the Programs page.
Open Signal to show the following interface. Press ▲/▼ to select an option and press OK. You can also click an icon on the interface. Note: The interactive panel will automatically detect signals when it is started or there is no signal. Menu Press Menu on the remote control to show the menu (Image→Sound Mode→Channel→Setting→Time→Parent Control). Scroll left and right on the screen or press ◄/► to switch between options.
Note: When the image mode is User, you can adjust the contrast, brightness, hue, sharpness and saturation. Sound Mode The Sound Mode menu shows options including Sound Mode, Equalizer, Balance, Surround, SPDIF Output and Alone. There are two ways to set it: 1.1 Click an icon and set it. 1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press Back to quit the menu. Note: When the sound mode is set to User, you can adjust High Pitch and Low Pitch.
Setting The Setting menu shows options including Menu Time, Switch Mode, Color Range, MHL Auto Switch, Movie Mode, and Restore To Default. There are two ways to set it: 1.1 Click an icon and set it. 1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press Back to quit the menu. Time The Time menu shows options including Date, Current Time, Off Time, Scheduled Time, and Sleep Time. There are two ways to set it: 1.1 Click an icon and set it. 1.
Parent Control The Parent Control menu shows options including Lock System, Set Password, Block Program, and Lock Children. There are two ways to set it: 1.1 Click an icon and set it. 1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press Back to quit the menu. Note: This menu is only available when TV signal source is used. ECO Mode Press ECO on the remote controller to enter the ECO mode (ECO-Auto-Standard).
Serial Port Control The RS-232 port of the interactive panel is defined as follows: Connect RS-232 port to the PC or controlling device. Enable RS-233 serial port connection and complete the following configuration. Port: COM1 (Set according to PC or controlling device’s port number) Bit rate 115200 Odd/even check None Data bits 8 Stop bit 1 The following table lists button controlling codes.
Function Controlling codes Function Controlling codes Down 7F 08 99 A2 B3 C4 02 ff 01 14 CF Listen Alone 7F 08 99 A2 B3 C4 02 ff 01 15 CF VOL - 7F 08 99 A2 B3 C4 02 ff 01 17 CF ECO 7F 08 99 A2 B3 C4 02 ff 01 16 CF VOL + 7F 08 99 A2 B3 C4 02 ff 01 18 CF Model 7F 08 99 A2 B3 C4 02 ff 01 31 CF Channel - 7F 08 99 A2 B3 C4 02 ff 01 19 CF Audio mode 7F 08 99 A2 B3 C4 02 ff 01 34 CF Channel + 7F 08 99 A2 B3 C4 02 ff 01 1A CF Power status 7F 08 99 A2 B3 C4 02 ff 01 37 CF Menu 7F 08 99 A2 B3
Specifications of PC Mode (VGA Input) SN Standard Resolution Refresh Rate (Hz) Horizontal Frequency (Khz) Vertical Frequency (Hz) Horizontal/Vertical Sync Polarity (TTL) 1 VESA 640X480 60 31.5 60 N/N 2 VESA 640X480 72 37.9 72 N/N 3 VESA 640X480 75 37.5 75 N/N 4 VESA 800X600 56 35.1 56 P/P 5 VESA 800X600 60 37.9 60 P/P 6 VESA 800X600 72 48.1 72 P/P 7 VESA 800X600 75 46.9 75 P/P 8 VESA 1024X768 60 48.4 60 N/N 9 VESA 1024X768 70 56.
Formats Supported by USB Mode Media category Formats Extension Image JPEG, BMP and PNG .jpg, .bmp, and png Movie MPEG1, MPEG2, MPEG4, H264, RM, RMVB, MOV, MJPEG, FLV .avi, .mpg, .dat, .vob, .div, .mov, .mkv, .r m, .rmvb, .mp4, .mjpeg, .ts, .trp, .asf, and .flv Music WMA, MP3, M4A, (AAC) .mp3, and .m4a Text TXT .txt FAQ & Troubleshooting Failure Fail to connect to the service program The panel needs re-positioning every time it is switched on. The positioning is inaccurate.
Failure Possible cause Solution The required covering area is not reached when writing or the nib is too small. Change the nib or use a pen with a larger covering area. The infrared tube is blocked. Check if infrared tubes are blocked. Strong light or infrared interference Remove the interference source or change the using environment. The color of strokes is same as or similar to the background color. Change the color of strokes. You hand or other objects are put on the display when writing.
Failure Possible cause Solution The remote controller fails. 1. Change the batteries. 2. Clean the launch window at the top of the remote controller. (Check if it is blocked) 3. Check contacts of the batteries. Computer cannot be started (applicable for models with computers) 1. Check if the computer adapter is correctly connected and is connected to power. 2. Check if the computer is connected correctly to the interactive panel.
Maintenance Tips Do not put or install the product near a heat source or under direct sunlight, in dusty or humid places, or where the product can be affected or damaged by mechanical vibration. To maximize the performance, it should be put away from equipment such as grid, large metal objects and radar stations as far as possible. Do not wipe the panel with any chemical agent. Solvents may damage the enclosure or paint.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
