User Manual for Interactive Panel Honghe Technology Group www.honghe-tech.com V901.20140703 Please properly keep the manual for further reference. This is the general user manual for all interactive panels. Therefore, it may be different from the actual product.
Table of Contents NOTICE .............................................................................................................................................................. 4 Mounting Requirements ...................................................................................................................................... 5 Bearing ........................................................................................................................................................
Programs ............................................................................................................................................................ 33 Calculator................................................................................................................................................... 34 Clock........................................................................................................................ .................................. 34 Music ............
NOTICE Install or place components of which power supply voltage is high enough to cause personal injury in places out of the reach of children. Do not use any types of power cables other than the one provided together with the product to prevent the product from being damaged. Do not open the enclosure unless you are a professional maintenance engineer to prevent an electric shock. Check if the electric supply voltage complies with the product’s receiving power supply before use.
Model: 70GT-X、EPR8AX0070、QIT1X70、TWB-N70、TWB-NB70、TWB-N70X、TWB-NB70X、OTS-70VX、OTS-70V2、 OTS-70X、P-70、X-70、P-70X、TID-70、TID-70X、Avtek TouchScreen 70P、Avtek TouchScreen 70X、70GT、70GT-X （standard） 、70GT-X（deluxe）、CCS-TS-7000-CA、HD-I7005E、HD-I7006E、HD-I7007E、HD-I7008E、HD-I7009E、 HD-I7018E、HD-I7019E、HD-I7020E、HD-I7021E、HD-I7022E、HD-I7023E、 HD-I7025E、HD-I7026E、HD-I7028E、 HD-I7029E、HD-I7030E、HD-I7031E、 HD-I7032E、HD-I7033E、HD-I7035E、HD-I7036E、HD-I7039E、HD-I7048E、 HD-I7049E、HD-I7050E、HD-I7051E、HD-I7052E、HD-I7053E、HD
Mounting Requirements Bearing You can choose the potable mounting according to your needs. If you choose portable mounting, use the mounting rack or support. If you want to use a self-made mounting rack, the bearing capacity of the rack should be at last four times of the actual weight of the display. The bearing capacity of the mounting support must be at least four times of the actual weight of the display to ensure steadiness of the interactive panel.
Introduction Thank you for buying HiteVision interactive panels. As our latest independently developed and produced human-machine interactive products, HiteVision interactive panels are multi-functional teaching displays for interactive teaching, digital demonstration, multi-media presentation, touch operations and handwriting.
Outer Appearance Left loudspeaker Control panel (Front view) Right loudspeaker OPS computer Rocker switch Interface panel (Left view) (Rear view) Interface panel (Front view) 8 (Right view)
Control panel 1 1]. Home: Open the Android home page. 2]. Back: Go back or return to the parent menu. 3]. HD 1: Switch over to HD 1 signal source channel. 4]. ECO: Switch over to ECO, Auto or Standard mode. 5]. Signal: Show or exit from the list of signal sources. 6]. VOL+: Increase the volume. 7]. VOL-: Decrease the volume. 8]. PC Power: Turn on/off the OPS computer.
Functions of Remote Controller 1]. : On or standby 2]. : Mute 3]. 0--9: Select TV channel or enter number 4]. : Open the Android home page. 5]. : Go back or return to the parent menu. 6]. : Show or hid menu. 7]. : Show or exit from the list of signal sources. 8]. : Enable Listen Alone mode. 9]. : Switch over to the computer’s resolution. 10]. : Up/Down/Left/Right direction buttons 11]. : Confirm. 12]. 13]. : Capture screenshots. : Show the current signal source.
Basic Operation Start Up Power the interactive panel with a 100-240V 50/60Hz AC power supply. Connect the panel to the power supply. Switch on the rocker switch (on the left of the rear of the panel, next to the power cable port) to enter the standby status. The power LED turns red. Press Power on the control panel or Standby on the remote controller to turn on the interactive panel. The OPS computer is started. The power LED turns green.
Installation of HitePanel Recommended configuration: CPU: Inter (R) Core i3 2.27GHz or AMD CPU with equivalent performance Memory: 1GB Hard drive: 1GB Graphics card: supports DirectX 9 or above If the interactive panel is equipped with the latest version of handwriting software in the PC before being delivered, please skip the step. HID drive-free function only applies for Vista, Windows 7 and above operating systems (realizing functions of Windows including multi-point touch).
Position HitePanel To ensure that the handwriting display works properly, you need to make the handwriting shown on the display coincides with the actual handwriting and position HitePanel to realize accurate coincidence. You need to position HitePanel under the following circumstances: When you first use the interactive LED display; Re-install the drive program; When you connect the display to another PC; The handwriting display adopts nine-point positioning method.
4. Use the pen to click and hold the center of the flickering cross. Do not release it until the flickering cross moves to the next positioning point. Complete the positioning process as instructed. After it completes, you will return to the desktop automatically.
Positioning Method for Windows 7 1. Connect the interactive panel to PC using the USB lead via the USB interface on the panel; 2. Select Tablet PC Setting on Control Panel. 3. Select on the setting window.
Use the pen to click and hold the center of the flickering cross. Do not release it until the flickering cross moves to the next positioning point. Complete the positioning process as instructed. Click Yes after it completes. Hits & Tips To ensure the handwriting accuracy, use the pen provided together with the interactive panel rather a finger to perform positioning. Positioning errors may cause touch functions of the interactive panel fail. In that case, please perform positioning again.
Assemble Built-in Computer Insert OPS computer into the slot and fasten it with two M4 screws on the left and right. Note: The OPS computer is not plug-and-play. Disconnect the interactive panel from the power before inserting the OPS computer. Smartbar The smartbar has three modes: Home Page, White Board, and Remarks. Under any of the three modes, you can click on the toolbar to go back to the previous page and click to exit from other programs or go back to the home page from other signal sources.
The following figure shows the interface when a SD card is inserted into an all-in-one interactive panel. The following picture shows the desktop of the OPS computer and files in the portable device. Click any place on the preview window of the OPS computer desktop to display the interface information. Click the SD card preview window to open the SD card interface. Click on the upper left corner of the home page to show tools, clock, calendar and calculator.
Clock Calendar 19 Calculator
Task Manager In the task manager, you can view currently running programs, switch and end programs. Click the task manager as shown in the following figure: to enter View running programs In the task manager, scroll left and right to view currently running programs. Switch programs In the task manager, click a program to switch over to the program.
End programs In the task manager, click a program and scroll up and down to end the program, or click a program and hold it for several seconds to show a prompt box. Click Remove from the List to end the program. White Board The white board provides the writing function. In the white board program, you can select a pen, line and color to write and use eraser to erase content on the white board. You can also print and clear the content on the white board.
New White Board and Setting Click and select New, View, Delete or Set from the menu. Click Set to set the color and shade of the white board as shown in the following figure: Pen/Line/Color If you want to use marker, click and hold If you want to use highlighter, click and hold for two seconds to set the line and color. for two seconds to set the line and color.
Eraser If you make an error or want to erase something, click want to erase. Cancel Click to use the eraser to erase the content that you to cancel operations. Capture Click to capture the content on the white board and save it as an image under the Screenimage directory. You can open the directory through the following ways: (1) Go back to the home page and click Screenimage in the file system. (2) Click on Smartbar to enter the file manager.
Gallery You can enter the gallery to view images one by one or as slides. Click on Smartbar to enter the gallery to show all folders containing images. Click a folder to show images contained in the folder. Single image Click one image in a folder. Scroll left to show the previous image and right to show the next. Under the single image mode, you can click icons on upper right corner of the image to delete, cut and edit the image.
Slide Click on the upper right corner of the folder and select Slide to view images as slides. File Manager In fire manager, you can copy, print and view files in the system. Click on Smartbar to enter the fire manager interface and show the file system. It also shows files in portable devices such as SD card and flash disk.
Copy Click one file or tick off Multiple and choose several files. Click to copy selected files to the portable device.
Print Click to open the preview page. Click number of copies to be printed. Click to set the printer. Click and to set the to start printing. View Click to open a file. You can view files including images, music, word, PPT and PDF. System Settings Click on Smartbar to enter the system settings page, which includes options including Volume, Time, Network, Input Method, Printer, Language, Clear Screenshot, Auto Luminance, and About Android.
Set Time/Date Click Time to enter the time/date setting interface. Click 24 Hours. When it is grey, it is 12-hour system. You can click AM or PM. When it is green, it is 24-hour system. Click Auto Update. When it is grey, you can modify the time and date. When it is green, the time and date will be automatically updated by the system. Click here to set month Click here to set year Click here to set time Click to enter the time zone setting interface as follows: After setting, click to save it.
Network Click Network to show the network status, LAN, and agency settings. Choose a network connection method and set parameters accordingly. LAN setting If the panel is connected with LAN cable and supports Dynamic Host Configuration Protocol (DHCP), the system will automatically configure the network protocol (IP) value. If you want to manually set the network protocol, enter the IP address, default gateway, and DNS server parameters on the software keyboard or remote controller.
Agency When the agency server is enabled, you can enter the master and agency server port numbers on the software keyboard or remote controller. After you enter the master and agency server port numbers, click Verify and enter the username and password. After setting, click < on the upper left corner or Back on the remote controller to go back to the parent menu. Click × to close the current page. Input Method Click Input to show options including ASOP and Google Pinyin.
Click Google Pinyin and configure functions as follows: Printer Click Printer to show the printer setting interface. Enter the name, type and IP of the printer. After setting, click < on the upper left corner or Back on the remote controller to go back to the parent menu. Click × to close the current page. Language Click Language to show options including Chinese (Simplified), Chinese (Traditional), and English. Select a language. Click < or Back to return to the parent menu.
Auto Luminance Click Auto Luminance to show options including Delayed and Instant. Click Delayed and auto luminance adjustment will be delayed for five minutes. Click Instant to enable auto luminance adjustment immediately. Click < or Back to return to the parent menu. Click × to close the current interface. Restore Default Setting Click About Android to show the following interface. Click Reset. Click OK to restore the default setting.
Browser Click on Smartbar to open the web browser. Enter a website and keywords to search on the software keyboard or remote controller. Listen Alone Click on the Smartbar or Listen Alone on the remote controller, and the screen will turn black. You can tap any place on the screen or press Listen Alone again under the Listen Alone mode to return to normal. Programs Click on the Smartbar to enter the program interface and show all programs in the system.
(Page 1) (Page 2) Calculator Click to enter the calculation page. Click numbers and characters on the keyboard. Clock Click to enter the clock page. Click Start to start timing and Stop to stop it.
Music Click to start the music program. The system will display songs in the local disk by artists, albums, file names, playlist and playing status. ES File Click to open ES File. You can copy, cut, delete, move and rename files.
Click on the upper right corner of the interface to select a file and click Temperature Measuring Click to measure the temperature of the panel. Select Signal Channel There are three ways to select a signal channel: 1.1 Press Signal on the remote controller. 1.2 Press Signal on the control panel of the interactive panel. 1.3 Click in the Programs page. 36 to select all files.
Open Signal to show the following interface. Press ▲/▼ to select an option and press OK. You can also click an icon on the interface. Note: The interactive panel will automatically detect signals when it is started or there is no signal. Menu Press Menu on the remote control to show the menu (Image → Sound Mode → Channel → Setting → Time → Parent Control). Scroll left and right on the screen or press ◄/► to switch between options.
SPDIF Output and Listen Alone. There are two ways to set it: 1.1 Click an icon and set it. 1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press Back to quit the menu. Note: When the sound mode is set to Custom, you can adjust High Pitch and Low Pitch.
Channel The Channel menu shows options including Antenna Type, Auto Search, DTV Manual Search, ATV Manual Search, and Edit Channel. There are two ways to set it: 1.1 Click an icon and set it. 1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press Back to quit the menu. Note: The Channel menu is only available in the TV mode.
Parent Control The Parent Control menu shows options including System Lock, Change Password, Program Lock, and Level Setting. There are two ways to set it: 1.1 Click an icon and set it. 1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press Back to quit the menu. Note: This menu is only available when TV signal source is used. ECO Mode Press ECO on the remote controller to enter the ECO mode (ECO-Auto-Standard).
Serial Port Control The RS-232 port of the interactive panel is defined as follows: Connect RS-232 port to the PC or controlling device. Enable RS-233 serial port connection and complete the following configuration. Port: COM1 (Set according to PC or controlling device’s port number) Bit rate 115200 Odd/even check Data bits 8 Stop bit None 1 The following table lists button controlling codes.
New search: DEVICE TYPE 99 A2 B3 C4 02 ff 01 31 VOLUME 99 A2 B3 C4 02 ff 01 33 ECO MODE 99 A2 B3 C4 02 ff 01 35 POWER STATE 99 A2 B3 C4 02 ff 01 37 DISPLAY STATE 99 A2 B3 C4 02 ff 01 32 AUDIO MODE 99 A2 B3 C4 02 ff 01 34 TOUCH STATE 99 A2 B3 C4 02 ff 01 36 Specifications of PC Mode (VGA Input) SN Standard Resolution Refresh Rate (Hz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 640X480 640X480 640X480 800X600 800X6
Formats Supported by USB Mode Media category Image Formats JPEG, BMP and PNG Movie MPEG1, MPEG2, MPEG4, H264, RM, RMVB, MOV, MJPEG, FLV Music Text WMA, MP3, M4A, (AAC) TXT Extension .jpg, .bmp, and png .avi, .mpg, .dat, .vob, .div, .mov, .mkv, .r m, .rmvb, .mp4, .mjpeg, .ts, .trp, .asf, and .flv .mp3, and .m4a .txt FAQ & Troubleshooting Failure Fail to connect to the service program Possible cause The drive program is not correctly installed. The USB interface (lead) is not connected or is faulty.
Failure Possible cause 1. Not sound and image Image is normal, but no sound No image or the image is black and white Image or sound is interrupted The remote controller fails. Computer cannot be started (applicable for models with computers) 2. 3. 4. 5. 6. 7. 1. 2. 3. 1. 2. 1. 2. 1. 2. 3. 1. 2. Solution Use the pen rather than a finger to write. Grasp the pen as far to the nib as possible. Wrong writing method The angle between the pen and display should be larger than 60 degrees.
Maintenance Tips Do not put or install the product near a heat source or under direct sunlight, in dusty or humid places, or where the product can be affected or damaged by mechanical vibration. To maximize the performance, it should be put away from equipment such as grid, large metal objects and radar stations as far as possible. Do not wipe the panel with any chemical agent. Solvents may damage the enclosure or paint.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
