HST -301 Module for Bluetooth 5 LE The is a line of powerful, highly flexible, ultra-low power Bluetooth Smart modules based on the nRF52832 SoC from Nordic Semiconductor. With an ARM® Cortex™ M4F CPU, embedded 2.4GHz transceiver, and integrated antenna, they provide a complete RF solution with no additional RF design, allowing faster time to market.
HST-301 Module Data sheet Bluetooth 5 LE July 24, 2019 + Lighting Products + Fitness devices * Wearable 3.
HST-301 Module Data sheet Bluetooth 5 LE July 24,2009 4. Quick Specifications Version 5.
HST-301 Module Data sheet Bluetooth 5 LE July 24, 2019 25 P0.09 In/Out GPIO/NFC1 26 P0.10 In/Out GPIO/NFC2 27 P0.11 In/Out GPO 28 P0.12 In/Out GPO 31 P0.13 In/Out GPO 32 P0.14 In/Out 33 P0.15 In/Out Ly LE Le Description 34 P0.16 In/Out 35 P0.17 In/Out GPO 36 P0.18 In/Out 37 P0.19 In/Out GPO 38 P0.20 In/Out CONTRACEPTION 39 P0.21 In/Out PRESETTING 40 P0.22 In/Out GPO? 41 P0.23 In/Out GPO? 42 P0.24 In/Out GPO? 43 SWELL In SWD Clock 44 STDIO In/Out SWEDISH 17 vce Power +1.7V to +3.
HST-301 Module Data sheet Bluetooth 5 LE July 24, 2018 Ts Storage Temperature Range -40 125 °C Table 7 Absolute Maximum Ratings 6.2 Operating Conditions EL Parameter LUE ii as Veo Operating supply voltage Tree | Supply rise time (OV to 1.7V) Operating Ambient Temperature Range Table 8 Operating Conditions 6.3 General Purpose I/O The general purpose I/O is organized as one port enabling access and control of the 32 available GPO pins through one port.
HST-301 Module Data sheet Bluetooth 5 LE uty 24,2008 6.5 Debug & Programming The HST-301 supports the two pin Serial Wire Debug (SWD) interface and offers flexible and powerful mechanism for non-intrusive debugging of program code. Breakpoints, single stepping, and instruction trace capture of code execution flow are part of this support. 6.6 Clocks The HST-301 Series requires two clocks, a high frequency clock and a low frequency clock.
32.768 kHz Oscillator Comparison Io Current for 32.768kHz Crystal Oscillator Ire Current for 32,768kHz RC Oscillator Synths Current for 32,768kHz Synthesized Oscillator Frequency Tolerance, 32,768kHz Crystal Oscillator 12! frolicsome | (BLE Stack)! 50 ppm Frequency Tolerance, 32.768kHz Crystal Oscillator a +50 m frontward | (ANT Stack)! = pp fro L Lire Frequency Tolerance, 32.768kHz RC Oscillator frolicsome | Frequency tolerance, 32.768kHz RC after calibration £250 ppm Frequency Tolerance, 32.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1} this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note 3: Additional testing and certification may be necessary when multiple modules are used. Note 4: The module may be operated only with the antenna with which it is authorized. Any antenna that is of the same type and of equal or less directional gain as an antenna that is authorized with the intentional radiator may be marketed with, and used with, that intentional radiator.