Specifications

ManualsBrandsShenzhen Hifun Technology ManualsElectronicsProjector

品名：RFMTA110700NNLB004 History List

版本

REV.

修訂者

EDITOR

修訂頁次

PAGE

修訂內容

ITEMS OF CHANGE

申請日期

DATE

生效日期

VALID

DATE

ECN 編號

ECN NO.

Huiwenchan

ALL

Temporary Release

2022/02/22

According

to the date

of PLM

Release

N/A

Summary of content (21 pages)

PAGE 1
品名：RFMTA110700NNLB004 History List 版本 REV. 修訂者 EDITOR 修訂頁次 PAGE 修訂內容 ITEMS OF CHANGE 申請日期 DATE A0 Huiwenchan ALL Temporary Release 2022/02/22 生效日期 VALID DATE According to the date of PLM Release ECN 編號 ECN NO.
PAGE 2
022/2/22 INPAQ TECHNOLOGY CO., LTD 1.Explanation of part number： RF Type Code Walsin RF Device MTA 1107 Metal Dimension (Unit: mm) Product Code 00 Cable Length (unit: cm) N N Connector Brand A: N C:MCX D:IPEX III Per 2 digits of E: IPEX IV length, width 2 digits for F: IPEX A13 cable length Metal H: Hirose Antenna e.g.:1107 I: IPEX Length 11.35 e.g.: 00 mm, Width None Cable M: MMCX S: SMA 7.
PAGE 3
2022/2/22 INPAQ TECHNOLOGY CO., LTD 3. Antenna Drawing： UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO.
PAGE 4
2022/2/22 INPAQ TECHNOLOGY CO., LTD 4. Performance Report： Test Report ■Experimental Setup UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 5
2022/2/22 INPAQ TECHNOLOGY CO., LTD ■ELECTRICAL CHARACTERISTICS UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO.
PAGE 6
2022/2/22 INPAQ TECHNOLOGY CO., LTD ■Antenna Efficiency and Peak Gain UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 7
2022/2/22 INPAQ TECHNOLOGY CO., LTD UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO. PAGE 7 OF REV.
PAGE 8
2022/2/22 INPAQ TECHNOLOGY CO., LTD UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO. PAGE 8 OF REV.
PAGE 9
2022/2/22 INPAQ TECHNOLOGY CO., LTD UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO. PAGE 9 OF REV.
PAGE 10
2022/2/22 INPAQ TECHNOLOGY CO., LTD ■RADIATION PATTERN 2400 ~ 2500MHz X-Z Plane Phi=0.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 11
2022/2/22 INPAQ TECHNOLOGY CO., LTD Y-Z Plane Phi=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO.
PAGE 12
2022/2/22 INPAQ TECHNOLOGY CO., LTD X-Y Plane Theta=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 13
2022/2/22 INPAQ TECHNOLOGY CO., LTD 5150 ~ 5850MHz X-Z Plane Phi=0.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 14
2022/2/22 INPAQ TECHNOLOGY CO., LTD Y-Z Plane Phi=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO.
PAGE 15
2022/2/22 INPAQ TECHNOLOGY CO., LTD X-Y Plane Theta=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 16
2022/2/22 INPAQ TECHNOLOGY CO., LTD 2400 ~ 2500MHz X-Z Plane Phi=0.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 17
2022/2/22 INPAQ TECHNOLOGY CO., LTD Y-Z Plane Phi=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO.
PAGE 18
2022/2/22 INPAQ TECHNOLOGY CO., LTD X-Y Plane Theta=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 19
2022/2/22 INPAQ TECHNOLOGY CO., LTD 5150 ~ 5850MHz X-Z Plane Phi=0.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.
PAGE 20
22/2/22 INPAQ TECHNOLOGY CO., LTD Y-Z Plane Phi=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC NO.
PAGE 21
2022/2/22 INPAQ TECHNOLOGY CO., LTD X-Y Plane Theta=90.00deg Gain . dB UNLESS OTHER SPECIFIED TOLERANCES ON： X＝N/A ANGLES＝N/A SCALE：N/A X.X＝N/A X.XX＝N/A HOLEDIA＝N/A UNIT：mm DRAWN BY：詹惠雯 CHECKED BY：詹惠雯 DESIGNED BY：黃瑞郎 APPROVED BY：陳振榮 TITLE：RFMTA110700NNLB004 INPAQ TECHNOLOGY CO., LTD. THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.