User's Manual

ManualsBrandsShenzhen Hesibond IOT Technology ManualsComputers & AccessoriesIOT Lock Gateway

User Manual

Model No: 2ASI7-HB-WLK-02

IOT Lock Gateway

Picture 1.

LTE wireless IOT Lock Gateway: put SIM card into

the LTE wireless IOT Lock Gateway,the gateway

collects the data of the IOT lock and sends the

data to the server. The gateway is responsible for

sending the data to the IOT lock when the gateway

received the order from users. The gateway is the

data transfer station.

LTE gateway has the 4G communication module，

Summary of content (4 pages)

PAGE 1
User Manual Model No: 2ASI7-HB-WLK-02 IOT Lock Gateway Picture 1. LTE wireless IOT Lock Gateway: put SIM card into the LTE wireless IOT Lock Gateway,the gateway collects the data of the IOT lock and sends the data to the server. The gateway is responsible for sending the data to the IOT lock when the gateway received the order from users. The gateway is the data transfer station.
PAGE 2
LTE gateway connect the backstage system with SIM card, the order send to lock to unlock door or the data of the lock send to backstage system both situation need gateway to transfer the data to complete the data communication between lock and backstage system. The data communication exception will present, when the gateway has exception. At this time, the data communication will be cut off. IOT lock data communication use double-way AES encryption to sure the safety of the data.
PAGE 3
Table 1.0 IOT lock gateway parameters No. Features Technical parameters 1 Modulation QPSK ，16QAM IOT Lock Gateway method 2 Frequency range LTE Upward:2500 MHz – 2570MHz Downward:2620MHz – 2690MHz 3 Power range Adapter: Mode: P-046-090200 Input: AC100~240V 50/60Hz 0.6A, Output: DC9V 2A Battery: DC3.
PAGE 4
FCC ID: 2ASI7-HB-WLK-02 Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.