User Instructions

ManualsBrandsShenzhen Henghe Optoelectronics ManualsElectronicsLED intelligent WiFi controller

第 1页，共 10 页

Product Name: LED intelligent WiFi controller

Product model: HH-IR23#AR WiFi

1. Product overview:

This product is widely used in home, hotel, KTV evening party, party and other indoor

decoration with music. Instantly turn the environment into a more active atmosphere, and dazzle

yourself into a passionate moment with this environment. Adopt infrared controller advanced

computer control chip, can be used to control all kinds of low-voltage DC 5V-24V LED magic color

as the light source of lamps and lanterns with module, easy wiring, simple use and other

advantages. Remote control brightness adjustment, static color selection and various dynamic

lighting effect and music atmosphere effect can be carried out through the infrared 23 key

remote control.

2. Technical parameters:

●Operating temperature: -20-60 ℃

●Power supply voltage: DC 5V-24V

●Output: 3 channels

●Remote control distance: 7-10m

●Remote control mode: point-to-point remote control

●Connection: Gongyang

●Remote control size:

●Controller size:

●Net weight:

●Total weight:

●Static power consumption: <0.5W

Summary of content (10 pages)

PAGE 1
Product Name: LED intelligent WiFi controller Product model: HH-IR23#AR WiFi 1. Product overview: This product is widely used in home, hotel, KTV evening party, party and other indoor decoration with music. Instantly turn the environment into a more active atmosphere, and dazzle yourself into a passionate moment with this environment.
PAGE 2
●Output current: <2A (each circuit) 5V<30W12V<72W, 24V<144W 3. Controller: 4.Instructions: ①Instructions for Remote Control: The remote has 23 buttons ：In any state, press to close and open the controller. ：Press this button in the dynamic mode to adjust the speed of the dynamic mode plus + minus -, a total of 10 poles; then in the music rhythm mode, the rhythm sensitivity can be adjusted; in the setting state, the number of lights can be adjusted to add + minus -.
PAGE 3
After the white light is lit, press SPEED to add and subtract the number of points for one point and then press MODE to add three points and three points to the number of points you need. ：Press this button in the boot state: static white static red static green static static blue static yellow COLOR+ static COLOR plus COLOR- static COLOR minus. ：There are 8 different music effects with the music mode plus or minus keys.
PAGE 4
5.Connection mode of optical tape and matters needing attention: First connect the load line, then connect the power line; Before power-on, ensure that there is no short circuit between cables. When operating, the remote control points to the infrared receiving head to ensure that there are no obstacles between the remote control and the receiving head; 6.APP(TuyaSmart) Connection instructions and download QR code： Step 1: Enter the state of distribution network.
PAGE 5
The third step. Enter the WiFi password. Note: The router must be 2.4GHz WiFi After opening the APP, it will automatically pop up the connected device and click Enter the password and click Next Click finish to enter the operation panel after successful distribution network: 7.
PAGE 6
②The home page； Adding a new Voice control; Such device as turning on the light, turning off the light, etc Open to turn off the lights Long press the device in the list to remove it. After making sure that the device enters the state of distribution network, the indicator light flashes.
PAGE 7
(TuyaSmart) and log in the account. After joining, they can operate the device.
PAGE 8
Choose different light effect modes Add color, up to 8 colors. Adjust transformation speed Note; Edit the saved custom scene to switch to the main page to view or edit the custom scene name.
PAGE 9
8、Failure analysis and solution; The fault phenomenon Cause analysis The solution 1、check the switching power supply 2、Correct it Not bright 1、The switching power supply is dead 2、The positive and negative poles of the power supply are connected negatively 3、Wrong or insecure connection 4、RGB line wrong 4、RGB lines should be reconnected 5、The speed is set too 5、Please press the speed button slowly to speed up 6、batteries 6、Replace the battery 7、Out of control distance 7、Reduce remote control
PAGE 10
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.