User's Guide

Bluetooth AI Translation
Stick User Guide
Bluetooth AI translation stick
Please read carefully before use
user's manual
-2--1- -3- -4-
-9--8--7--6--5-
Download and connect to the app
1. Scan the QR code below with your mobile
phone to install the translation and
communication APP
Switch machine.
Press and hold the power button to switch the
translation stick.
Dialogue translation
1. Press and hold the A key to speak, and release
it to translate the language corresponding to the
A key in the APP;
Please switch the language at the top of the APP:
2. Press and hold the B key to speak, and release
it to translate the language corresponding to
the APPB middle key.
Language switch selection
Repeat
1. Short press the M button to play and repeat
the last translation content, and you can listen
to the repeat while following it.
Long press the M button to enter the AI assistant
function, which can conduct encyclopedia
questions and answers, play nursery rhymes,
listen to opera comics, and more than 40 AI
artificial intelligence skills.
How to use: Long press the M key to speak the
question you need to know, and after releasing
it, the corresponding answer or corresponding
audio content will be played.
1. Short press the A button to increase the
volume;
1. Switch the Bluetooth of the mobile phone
again;
2. Close the APP in the background and reopen
it;
3. Try to connect the translation stick after
restarting the phone.
1. Please turn the phone and translation stick to
the maximum;
2. (IOS) Please go to the Bluetooth settings and
confirm that the AUD Bluetooth device has
been connected, and the audio data needs to
be connected to transfer to the translation stick.
1. Check whether the battery is exhausted,
connect the charger and charge it for 2
minutes and check whether the red light is on.
2. Short press the B button to decrease the
volume.
1. The red light is on in the charging state;
2. The blue light is on after fully charged;
3. The red light flashes in the low power state;
4. The blue light keeps flashing slowly when the
Bluetooth is not connected when the device is
turned on;
5. The blue light goes out after successful
Bluetooth connection;
6. Turn off the voice broadcast without lighting;
7. Press the A/B button to pick up the sound
and turn on the blue light, let go and start
translating and turn off the light;
8. To repeat the last sentence, press the M
button and the blue light will flash once to
start repeating.
Volume addition and subtraction
State of work light
Troubleshooting
The translation stick often disconnects
from the phone
The translation stick is silent after connecting
to the app
时，可能会出现短暂的服务延时，提示系
2. Open the mobile APP and register an
account with the
mobile account to log in.
3. Follow the operation
steps to complete the
connection with the
translation stick.
Main: Location/Bluetooth/Microphone
/Notification and other permissions need to be
selected and allowed;
IOS system mobile phone needs to manually
connect to the Bluetooth device prefixed with
AUD in the Bluetooth settings.
AI assistant
Can not boot
Warranty
Warranty Terms
Precautions
★ Do not random discard the machine or place
it in a fire, as it may cause danger because of
built-in polymer battery.
★ The charging voltage of this machine is 5V.
When charging this machine, use a 5V charger.
If you charge this machine with a charger higher
than 5V, it will burn out the chip inside the ma-
chine and cause the machine to malfunction.
The following conditions are not covered by the
warranty:
★ 1. due to improper use of the user, and self-
repairing caused by artificial disassembly;
★ 2. Failure caused by irresistible factors
(such as flood, fire, earthquake, lightning, etc.)
after purchase;
★ 3. no product warranty card, valid purchase
certificate, Don’t match the product model.
1 year warranty Since purchasing this product,
the user enjoys free warranty service when the
machine fails according to the user manual
operation instruction.
When applying the warranty, the user needs to
present a valid proof of purchase to the local
dealer, and the dealer will contact the manu-
facturer for repairs.
During the warranty period, the manufacturer
will charge a reasonable raw material fee or
maintenance fee based on the specific failure
in the following circumstances:
1. Damage caused by improper storage, im-
proper use, fall off , or failure to use as requir-
ed after purchase.
2. Damage caused by disassembly, mainten-
ance, and cleaning of the machine without
permission.
3. the appearance of scratches during use,
artificial damage and other circumstances
need to replace the new shell.
4. The use of fast cha
rging causes the machine
to malfunction (including fast charging head
and fast charging cable), please use the cha-
rging cable that comes with the machine to
charge.
Warranty Card
Thank you for purchasing our products, please
fill in the following content when purchasing
and save this card properly .
User profile
★ Warranty with this card
Note: The company has the
WARRANTY CARD
Contact person：
Contact number ：
Date of purchase ：
Purchase address：
contact address：
Remark：
Speaker
Speaker
power
button
M Button
Dialogue A side
Dialogue B side
microphone
indicator lamp
Lanyard hole
Charging USB
interface
Product Function
Description