User's Manual

Product Details
Smart Metering Plug
Quick Guide
*Please read the user manual carefully before operation.
The guide picture is for reference only, please in kind prevail.
LED Indicator
Networking Button
Supply plug
The smart WiFi metering plug, adopts flame-
retardant engineering material and low-power
c o n s u m p t i o n W i F i wi r e l e s s si g n a l
transmission technology, it can be controlled
by APP remotely. It also supports power
metering and timing switch (need to combine
with APP), and the function of power, voltage,
current overload protection. Plug and play,
install without tools.
Scan above QR code as above to download
Hismart
APP, and register user account with valid email, activate
your acount and login.
Click " ", select the Metering . According to WiFi
configuration guide, press networking button for 5
seconds till the red LED flash.
Plug
1.Working Voltage: AC220V(full voltage range)
2.Average Power Consumption ＜0.5W
3.Maximum Load: 3000W
4.Measured Voltage Range 110 -240VAC
5.Measured Current Range ＜16A
6.Measured Power Range ＜3000W
7.Working : -10℃ ~ +50℃
8. Humidity: ≤95%RH
9.WiFi Standard IEEE 802.11b/g/n 2.4GHz
10.Outline Dimension: 79.6*67.9*59mm
:
: VAC
:
:
7.Wireiess Networking Distance: Up to 100 meters
(in open area)
Environment
Working
:
Input WiFi password. Click Configuration , APP will prompt
“adding success” (smart phone needs to connect to WiFi
which has set password before configuration, and WiFi
needs to connect to Internet )
The red LED flash quickly and turn off after networking
succeed, check the device list in “my device”.
Plug an home appliance into the supply and power
on, user can check power consumption of this home
appliance through APP.
plug
It is suit to work with table lamp,
TV, air-conditioner, refrigerator,
electric fan, coffee machine,
bread machine and some other
household appliances and
metering power consumption.
Power on/off: After pressing p ,
blue LED keeps on and supply hub will be powered on;
Press p
ower switch/networking button
ower switch/networking button again, blue LED turned off,
supply hub will be powered off.
Please choose proper plug type
according to your need.
!
US Standard Smart Plug UK Standard Smart Plug
Chooseable Plugs
Statement
*Instruction is for reference only, please prevail in kind.
*Because of the updating of the technology, the final
interpretation right owned by factory, if there are any
inconformities when using this products under this instruction.
Description of LED Indicator Status
Light
State Operation
Red
LED
flash quickly
Flash slowly
Light on
Networking.
Supply is powered off
while network disconnected.
plug
Supply is powered on
while network disconnected.
plug
Supply is powered on
while network connected.
plug
Light on
Blue
LED
Light off
Supply is powered off
while network connected.
plug
WS2SK-US
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
To comply with FCC RF exposure compliance requirements,this grant
is applicable to only mobile configurations. The antennas used for this
transmittermust be installed to provide a separation distance of at least 20 cm
from allpersons and must not be co-located or operating in conjunction with any
otherantenna or transmitter.