User's Manual

Smart Door Sensor
User Manual
Technical Parameters
Function renderings
Product Description
*Please read the user manual carefully before operation.
The guide picture is for reference only, please in kind prevail.
This is a intelligent door sensor, adopts super low power Z-
Wave wireless networking technology, makes a longer
battery life-span, Feel open or close state of the door or
window through the near and separation between sensor
and magnetic. Dual sensor design, makes the installation
more flexible and adaptable. Products are suitable for
home, villas, factories, shops, warehouses, office
buildings, banks, room and other places of safety
prevention.
Sensor
Magnet
Networking Indicator
Align the installation, the installation distance is less
than 15mm. (The magnet part can be installed both
sides of detector part)
Tear off the gummed film, stick the equipment on the
required area.Sensor should be installed in fixed area
like door frame, magnet can be installed in active area
like door plank, this picture for reference only.
Click the “add” button to enter the networking mode.
Long press the networking button,then power on (put into
battery),ID code is clear and recover to factory setting.
Restore factory settings
Connecting network: According to the APP tip, press the
device networking hole for 3 times in 1.5 seconds, then the
green LED flashes quickly (connecting network within 30
seconds), and “networking succeed “ will be displayed on
app interface.
Disconnecting network: Click the “delete device” button on
APP, then quick press networking hole for 3 times in 1.5
seconds, green LED flashes for 6 times, disconnecting
network succeed.
Anti-tamper Key
Battery replacement
Step 1 Step 2
Please change the battery according to negative
and positive of the battery.
Please deal with waste batteries correctly for
environmental protection.
Step 3 Step 4 Step 5 Step 6
+
-
+
-
++
- -
++
- -
Remove insulator make device on power.
Install sensors into the bracket.
1. DC3V（2 AAA battery）
2 ≤5uA
3 ≤35mA
4 ＞15mm
Z-Wave
6 ≥70 metres
9 16.5 mm
Working Voltage:
Static Current
Alarm Current
Detecting Distance
Networking Ad-Hoc Network
Wireless Networking Distance
in the open area
Working Environment
Working Humidity Maximum 95%RH
Detector Dimension
Magnet dimension
×
（ ）
℃
×
× ×
.
.
.
5.
.
7. -10℃ ～ +50
8.
. 76×36.6
10. 76 13.9 16.5 mm
:
:
:
:
:
:
:
:
:
networking
button
1
2 3
4 5
Statement
*Instruction is for reference only, please prevail in kind.
*Because of the updating of the technology, the final interpretation right
owned by factory, if there are any inconformities when using this products
under this instruction.
6 7 8 9 10 11
HS1DS-Z