Smart Wireless Camera T1 Operation Instruction FCC ID: 2A2CY-HCYS004
Contents 1.Packing list---------------------------------------01 2.Product appearance---------------------------02 3.Quick start---------------------------------------04 4.Set up the camra--------------------------------06 5.Install the camera---------------------------------11 6.Share the camera---------------------------------14 7.Charge the camera------------------------------17 8.Indicator light status--------------------------18 9.Product specification------------------------18 10.
Packing list 1. Camera*1 2. Bracket*1 3. Mounting kit*1 4. USB charging cable *1 5. Operation instruction*1 6.
Product appearance Wi-Fi antenna Infrared lamp White light Indicator light 02 Lens MIC Human body infrared sensor
Micro-USB port Speaker Micro-SD card slot Reboot hole Power button 03
Quick start The smart battery camera supports battery-powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration. Android Download App Store Download Download App Scan QR code or go to the link to download and install the App：https://www.vicohome.
2. Add the device Sign in to the App connect to Wi-Fi and add the device according to the prompts (please bring the device close to the router when configuring).
Set up the camera Click the "Add Camera Now" in the App and enter the Wi-Fi network name and password that you want the camera to connect.
To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise¬level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click "Continue" to generate the QR code for pairing the camera.
2) After pressing the camera switch for 3 seconds, the camera will turn on. The camera will emit the scanning sound "Ding Dong Ding Dong" after it is turned on (if you do not hear it, please double click the power button). Power button 3) Take the lens of the camera facing the QR code generated on VicoHome about 20 cm (7 inches) until you hear a "Ding" sound.
4) After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click "Continue" to complete the pairing.
Possible problems with binding: ●●When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the App is correct; ●●When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2; ●●When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that
Install the camera You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use. (1) Select a good spot for your camera Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera's field of view than movements toward or away from the camera.
Recommended height About 6 ft For outdoor use, please install the camera upside down to maximize the waterproof performance and the human body infrared sensor’s effectivity. (2) Install the bracket 1) Screw fixing: Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws.
2) Fix the camera Put the camera up side down and then fix the camera to the bracket by a screw .
Share the camera When you want to let other family members or friends view the camera, you can use this feature. Only the admin user who is the first to add the camera is able to share the camera and manage the settings for the camera. The shared users have limited access rights. (1) Steps for Admin User 1) Find the camera you want to share on the App Homepage , then tap the "Share" button.
2) Tap "Camera sharing", a QR code for sharing will be generated.
(2) Steps for Shared User For the family members or friends you want to share, find "Add friend's camera" on the Homepage to enter the scan code page, then scan QR code generared on the admin's phone, then send the access request to the admin user.
(3) Steps for Admin User You will receive a confirmation notice, and you can complete sharing after agreeing. Charge the camera The App will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera's indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 15 hours to fully charge the camera.
Indicator light status Mode Status Sleep mode Off Working mode Charging mode Fully charged mode Blue Yellow Green Product specification Item Specification Image resolution Max. 1920 X 1080 Camera lens Video bit rate Storage media Rotation Angle Adaptive Micro SD card (Up to 128GB) 355° pan, 90° tilt Battery capacity 9000mAh Size(without bracket) 120.2×101.1×158.3（mm） Adapter requirement 18 Field of view: 110° 5V/1.
Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware version in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading. FCC warning This device complies with part 15 of the FCC Rules.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FAQ 1.Q:Camera permission management: How to invite family and friends to use my camera together? A: Open the App and select your camera on the home page. Click the share button on the home page or the "Share" in the camera settings to enter the sharing page, and then click "Invite " to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone. 2.
5.Q:How far should the camera be placed from the router? A: After testing, the Wi-Fi connection distance can normally reach up to150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible. 6.
V1.
