User Manual VER:NHC01 V1.
Contents 1.Important tips....................................................................................01 2.Product presentation....................................................................... 02 3.Install battery & SD card .……........................................................ 03 4.Usage of Camera …………………….................................….……..04 5.Button feature introduction………........................................……....04 6.System Setting………………………...................................
1. Important tips 1.1 About Batteries ● 8pcs 1.5V AA alkaline batteries are required for the maximum battery life. used and new batteries cannot be mixed, do not mix battery types. Noted: Do not use the charged battery. The low voltage affects the use time of the camera. ● When the camera doesn’t use for a long time, please remove the battery to avoid leakage damage to the camera or battery power loss. 1.2 About SD card ● This camera must use a brand high-speed SD card above class10 or higher.
● Clean the PIR lens if it is dirty during use. ● Cleaning steps: Try to blow it off or gently pick out the dirt. Don't try to wipe it, otherwise it may cause more scratches. PIR lens scratches reduce PIR detection performance. ● Please remove the protected film on the PIR sensor, it will affect the monitor distance. ● Avoid error triggering, the machine cannot be placed near heat sources (especially where windy). 2.Product presentation 2.
2.3 Application scene ● For hunting and tracking of animal traces or habits. ● Used to observe the flowering process of plants. ● As an temperature-trigger security camera for homes, farms, offices, and communities. ● Other indoor and outdoor monitoring where evidence of intrusion is required. 3.Install battery & Insert SD card 3.1 Install the batteries ● Open the camera rear housing, you will find the battery box(as Figure 1), 8pcs batteries must be installed.
↓ 4.Usage of Camera 4.1 OFF mode: the switch key locate “OFF” means Power OFF mode. 4.2 SETUP mode: the switch key locate “ SETUP” means settings mode. 4.3 ON mode: the switch key locate “ON” means it will be monitored status after count down, the camera works wit the previous stetting. 5.Button feature introduction 5 1 2 12 1.MENU button 7 8 9 6 10 11 7.Left button 3 2. REPLAY button 8.Right button 4 3.SHOT button 9.SD card slot 4.OK button 10.USB port 5.Up button 11.OFF/SETUP/ON 6.
6.System setting 6.1 Pull the switch to “SETUP” mode, the camera enter the setting mode, the LCD shows the image. the machine Light sensitizer detects the current environmental brightness ,and intelligently switch between the day lens or the night vision lens according to the current brightness .For example; the environmental light visibility is high, the machine uses the daytime lens and shooting color files .
Name Setting Describe Mode Photo Video Photo + Video Choose the camera working mode. PIR Interval 5Seconds After the camera triggers shooting, the camera does not take photo and record again within the setting interval time,it can prevent the SD card from being filled fully with duplicate files. ↓ 59Minutes PIR Sensitivity Low Medium High The sensitivity of the PIR sensor is depended on the environmental temperature.
IR LED OFF: the IR light won’t be turned on when the environment light is dark or all dark Note: Auto is recommended Side PIR Setup OFF ON The sensors on both sides will not be turned on. Time Lapse ON OFF When choose “ON”, the camera automatically takes photos / video recording according as the set interval.normally it is used to observe cold-blooded animals, such as snakes Or flowering processes. Note: When choose “ON”, the main PIR are not working.
Image Size day 60MP(10320*5808) 24MP(6528*3672) 56MP(9984*5616) 20MP(6144*3456) 52MP(9632*5408) 16MP(5376*3024) 48MP(9248*5200) 13MP(4816*2704) The options for photo resolution:the resolution is high, the photo quantity is better, the file is bigger, and it use the SD capacity is more. 44MP(8832*4960) 8MP(3840*2160) 40MP(8416*4736) 5MP(3072*1728) 36MP(8000*4496) 3MP(2304*1296) 30MP(7392*4160) 2MP(1920*1088) at night 8MP(3840*2160) 3MP(2400*1344) 5MP(2960*1664) 2MP(1920*1088) Picture NO 1.Photo 2.
Video resolution day 4K/30 Fps (3840*2160) 2.7K/30Fps(2704*1520) 2K/30Fps(2560*1440) 1296 30Fps(2304*1296) 1080P/30Fps(1920*1080) 720P/30Fps(1280*720) 480/30Fps(848*480) 360/30Fps(640*368) The options for photo video resolution:the resolution is high, the photo quantity is better, the file is bigger, and it use the SD capacity is more.
and set the current date & time. 2.Date Format: choose different date format. Time Format 12H and 24H Option for 12H or 24H Date Stamp OFF ON The default is “ON”, If choose OFF, then all watermarks in the pictures and video files are closed Camera Name Camera Name Press“UP/DOWN/LEFT/RIGH”and choose the setting and pleae button to switch Password ON OFF 1.You can set a 4-digits as boot password to protect the camera, the password can choose any 4-digits like as digit “0~9” and letter “A~Z”. 2.
WIFI Auto WIFI Of f 1minutes 2minutes 3minutes After turn on, the WIFI automatically exits if it doesn’t connect camera successfully within the set time. Beep sound ON OFF The default is “ON” If choose “OFF”, The buttons have no sound during the operation. Language English, French, Español , Portuguese, Danish,Italian,Chines, Traditional Chinese Russian,Japanese This hunting camera supports multiple languages. Format Cancel OK All files will be deleted after format.
7.3 When the APP is downloaded and installed, the mobile terminal will prompt “Allow Hunting 4K to access photos and media on your device?” during the installation process. Please select Allow at this time. If not allowed, APP cannot read camera pictures and videos(as picture) Android/IOS 8.Camera connect with Phone by WIFI 8.1 Steps for Android Mobile phone connect camera ● Please turn off your cellular data before using,as Figure 1,And turn on Bluetooth, as Figure 2.
● After the countdown, the mobile phone will switch to its WLAN interface automatically ,select the “Hunting 4K” name, and follow the prompts to enter the password: 12345678 to connect to the camera WiFi as Figure 8. ● After the WiFi connection is successful, the camera displays as Figure 9. ● Click back to enter the APP and select “Keep WLAN connection” as Figure 10. ● Then enter real time monitor screen as Figure 11 to take photo and video ,playback and set parameters etc.
Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 SSID:Hunting 4K PWD:12345678 14
Figure 10 Figure 11 8.2 Steps for IOS system app connect camera ● Please confirm that the phone Bluetooth is on before operation, as Figure 1. ● Click the app icon , as Figure 2“Hunting 4K”, the“Turn on Camera Bluetooth” interface pops up, as Figure 3. ● Click “TURN ON BLUETOOTH”, it will pop up the interface as Figure 4. ● Select the corresponding Bluetooth name of the camera “CAMERA-XXXXXXXX”, and click “TURN ON BLUETOOTH” as Figure 5.
● Select“Hunting 4K” name and follow the prompts to enter the password 12345678 to connect to the camera WiFi, as Figure 10. ● After the WiFi connection is successful, the camera displays as Figure 11. Click “Hunting 4K”, Then enter real time monitor screen as Figure12 to take photo and video, playback and set parameters etc.
Figure 4 Figure 5 Figure 6 SSID:Hunting 4K PWD:12345678 Figure 7 Figure 8 WIFI connection SSID:Hunting 4K Password:12345678 17 Figure 9
9.Installation and positioning 9.1 Calibrate the camera installing position ● To verify that the camera effectively monitors the selected area, pull the switch to “SETUP” and fix the camera. the monitoring area you want, try different distances and angles to move repeatedly around the camera, the led lights flash to prove within the monitoring range.The led light does not flash to proves outside the monitoring range.
10.Specification parameters Product name Hunting 4K LCD SCREEN 2.4 inch Camera Days: 13Mega pixel Lens FOV=90 Photo resolution Days:60MP,56MP,52MP,48MP,44MP,40MP,36MP, 30MP,24MP,20MP,16MP,13MP,8MP,5MP,3MP,2MP Night:8MP,5MP,3MP,2MP video resolution Days:4K,2.
Battery 8X1.5AA battery MIC Built-in Microphone Speaker Built-in speaker Working temperature -20°C to +60°C Storage temperature -30°C to +65°C Camera weight About 390g Size 145x97x74MM 11.FAQ FAQ Problem analysis Solutions Camera can’t take photo properly 1.PIR protected film isn’t removed. 2.Whether the installation is in a valid range or not. 1.Please check if romove the PIR protected film or not. 2.Please check the installation position is better.
No pictures inside the SD/TF card 1.1.Bad SD/TF card. 2.Whether the card is locked or not format the SD/TF . Change and format the SD/TF card, and check if the card can take photo and record properly. No photos or video at night The battery voltage is too low Replace with the new battery The app could not connect 1.The app is not compatible with Mobile phone. 2.The phone does not open Bluetooth. 3.The WiFi does not connection properly. 1.Check the app version or updated mobile system. 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.