User Manual VER:NDL601-V1.
Introduction Thank you for purchasing this hunting camera. This product is a digital camera dedicated to recording and observing wildlife. For your convenience and ease of operation, we have a detailed manual. This manual introduces how to use this hunting machine systematically. Please read this manual carefully before use so that you can quickly and correctly master the method. The contents of this manual are for reference only and use the latest information in the preparation of the manual.
● Before plugging in or out the memory card, please firstly disconnect power supply of the camera; ● After using for many times, performance of the memory card will be lowered. In case of lowered performance, a new memory card is needed to purchase; ● The memory card is a precise electronic device.
Appearance 1.Photosensitive sensor 2. Secondary PIR indicator 4.Main PIR indicator 5.Lens 6. Left IR LED 8.Main sensor 9.Left sensor 10.Right Sensor 12.Up botton 13.LCD 14.OK/SHOT 16.OFF/SETUP/ON 17. Battery compartment cover 19.AV connector 20.USB Port 21.SD Slot 3.System indicator 7.Right IR LED 11.MODE 15.Down botton 18.DC connector 22.
Button function and indicator Button Power MODE Up Functions Pull switch: 1.OFF 2.SETUP 3.ON 1. Short press to switch recording, photo, playback and menu 2. In the submenu, short press to return to the previous menu 3. Short press on the password setup interface to enter the next setup option. 1. In the menu setting mode, you can select upwards 2. In the time setting or password protection interface, you can select numbers or characters upwards. 3. Press and hold for 3 seconds to open or exit WIFI 1.
Getting started 1.Battery/Adapter Please make sure to place batteries in the camera before using. 1.1First open the camera by swiveling the base plate. Find the battery compartment cover to open it. Insert 8pcs AA batteries into the battery slot. 1.2 When using the power adapter (optional), find the rubber seal on the bottom of the camera and open it, then plug it into the power supply (DC DC6V-2A). 2. Inserting memory card 2.
System settings 1. Power on and off/ System settings following pages. In SETUP mode, the infrared lamp is closed. 1.1 To put the operating mode selector switch from“OFF”to“SETUP”,the camera is on. 1.2 Press MODE button to switch video, photo, playback and menu modes 1.3 Press OK to save the Settings under menu Settings. In the interface of recording or photographing, short press to take pictures or record videos 1.
2.3 Photo+ Video mode In Photo+Video mode, the camera first takes a photo and then starts filming video. Note: The camera would enter power save mode and screen turns off when recording. The screen could be turned on by pressing any keys on the camera. 3. Video length The video length is optional between 5-180seconds. The longer the recording time selected, the shorter the operating time is. The preset video length is 5 seconds. 4.
6.IR LED Set the camera IR LED light”Auto”:the camera automatically adjusts the brightness of the infrared light according to the status of the battery capacity during the night. "super fine": under“Super fine“shooting mode, IR LED will be the most brightness and the power consumer is high.
9. Date/Time Set the camera date/time setting. Select“Date/Time option”,press OK button to pop up the settings dialog box.Press the Up/Down button to change the number, press OK to confirm the current number and enter the next setting option. For the year/month/day format: press the up and down buttons to select the format (YY/MM/DD, MM/DD/YY, DD/MM/YY) Time format: 12 or 24 hour system. 10. Password set up Set the camera's power-on password.
12. Playback mode 12.1 Remove the camera from the installation position, switch the switch from“ON” to“SETUP” , press the MODE button to switch to the playback mode, press the up/down button to view the captured picture or video, and when playing back the video file, press the OK button to start playing, and press OK again to stop the broadcast. During playback, press the up button to fast forward 2 times, 4 times, 8 times; press the button to rewind -2 times, -4 times, -8 times.
13 WIFI APP connection Before using the wifi function, please install the APP application on the smartphone device. Please download and install the app from Google Play by searching "Hunting Camera Pro" for Android smartphone and App store by searching "Hunting Camera Pro" for IOS smartphone. Connection steps: 13.1 Turn on Wifi 13.1.1When the Android camera is in the SETUP mode, press and hold 3S up button in the video or camera mode. The screen displays the“WIFI”connection interface.
.2 Open the phone "Settings", open the "WLAN" option in the settings, search for the camera's WIFI name "Hunting Camera", and enter the original password is: 12345678;, you will see the camera has a connection interface after the connection is successful. The screen will be turned off in about 2 minutes or so camera; if you press any button on the camera, the machine screen will light up again, and the connection success message will be displayed as shown below: 13.
WIFI Exit WIFI 14.1 Press and hold the button on the machine for 3 seconds to exit WIFI. The camera returns to the recording interface and the indicator light turns off. 14.2 Press“OFF”on the remote control. If you press the first time, you can see that the indicator light on the remote control is always on. Then press the s econd time again, you can see that the indicator light on the remote control flashes quickly, indicating that the WIFI has been successfully turned off.
Working mode description 1.Aligning the camera In the test (SETUP) mode, you can calculate the optimal shooting angle and camera range of the camera. 1.1 During alignment consider whether the use of the side motion sensors may be useful for attaining the desired observation results. 1.2 Align the camera as follows: 1.2.1Fasten the camera to a tree or similar object at a height of 1-2 meters and align the camera in the desired direction.
2.Normal working mode In this mode, shooting is triggered by the sensor. Enter the monitor mode when the switch is in the "ON" position, and the LED will go out after 5 seconds. The camera starts to operate independently and enters standby mode. Once an animal enters the detection area detected by the secondary sensor, the camera will be activated and the motion track will be detected.
Videos/photos/datas output 1.TV connections The camera can transfer the video signal to an external monitor or the video input of a television set. Please also follow the instructions of the respective playback device. 1.1 Open the TV, connect the TV with the camera through date cable 1.2 Open the camera, and slide the operating mode selector switch to“SETUP” 1.
Technical Specifications Image sensor 5MP CMOS sensor Lens F2.5 f=3.6m Function modes Screen Photo resolution Video resolution Memory type format USB connection Power Language Support System Dimension Video recording/Photo/Playback/Menu 2.0 inch LCD 24M/20M/16M/12M/10M/8M/5M/3M/2M 1080P/720P/WVGA/VGA TF card(up to 32GB max) JPG, MP4 USB 2.0 6.0V English/Chinese/German/French/Italy/Spanish/ Portuguese/Nederlands/Japan/Dansk/Svenska Windows XP/Vista/7/8, Mac 10.2 95x137.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
