User's Manual

ManualsBrandsShenzhen Hangshi Technology ManualsComputers & AccessoriesBluetooth Keyboard

Wireless Numeric Keypad

User Manual

Pairing Instructions

1. Switch the keypad power button to the right side. The status indicator will light up

in green for 2-3 seconds.

2. Press

 for 3 seconds, the status indicator will start to blink in green. The

keypad is now ready to connect to your device.

3. Activate the Bluetooth function on your device. Select Settings > Bluetooth > On.

4. Locate and select “Keyboard” in your Bluetooth menu. The status indicator

will stop blinking to indicate a successful connection.

Sleep Mode

The keypad will enter sleep mode after remaining idle for 30 minutes. To activate it,

press any key and wait for 3 seconds.

Charging Your Keypad

When the battery is low, the battery indicator will turn red. If there is no light

displayed at all, the battery is completely drained. For both situations, it is time to

charge the keypad.

1. Plug the included charging cable into the keypad charging port, and the USB end

into either a USB AC adapter or USB port on your computer.

2. When charging, the status indicator will turn red. Generally, it takes around 1 hour

for a full charge. (Output: DC 5V/500mA

)

Package Contents

1 x Numeric Keypad

1 x Charging Cable

1 x User Manual

Specifications

Bluetooth Version Bluetooth 5.1

Operating Range < 10m / 32.8ft

Working Voltage 3.7V

Summary of content (4 pages)

PAGE 1
Wireless Numeric Keypad User Manual Pairing Instructions 1. Switch the keypad power button to the right side. The status indicator will light up in green for 2-3 seconds. 2. Press for 3 seconds, the status indicator will start to blink in green. The keypad is now ready to connect to your device. 3. Activate the Bluetooth function on your device. Select Settings > Bluetooth > On. 4. Locate and select “Keyboard” in your Bluetooth menu.
PAGE 2
Working Current Charging Current Sleeping Current Re-connect Time Stand-by Time Charge Time Uninterrupted Work Time Lithium Battery Capacity 2mA 200mA 0.8mA 3 seconds 90 days 1 hour 80 hours 200mAh Product Overview ① Power Indicator: Slide the power button to right side, the indicator will be green for 2-3 seconds. ② Charging Indicator: The indicator will turn red when the keypad is charging and turn green once fully charged.
PAGE 3
PgDn N/A PgDn PgDn (Web Interface) PgDn (Web Interface) Ins N/A N/A Insert N/A Note: 1. The Num Lock function is applicable for both Windows system and Android system. (Inapplicable for iOS and Mac system). 2. When the keypad is paired with Windows devices, the Num Lock indicator will light up in red when pressed. When paired with Android devices, the Num Lock indicator will not light up when pressed, but it still functions.
PAGE 4
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.