Wireless Keyboard User Manual
Pairing Steps 1. Switch OFF/ON to ON, the power indicator will light up for 3 seconds. 2. Press the "Connect" button to enter pairing mode. The status indicator will start blinking. The keyboard is now ready to connect to your device. 3. Activate the Bluetooth function on your device. Select Settings > Bluetooth > On. 4. Locate and select “Bluetooth Keyboard” in your Bluetooth menu. The Bluetooth indicator light will stop blinking to indicate a successful connection. Note: 1.
Lithium Battery Capacity Frequency Band Maximum Radio-frequency power 280mAh 2400 to 2483.5 MHz 0 dBm Product Overview ① Caps Lock indicator: Cap Lock is on when lit. ② Bluetooth indicator: Flashes blue when the keyboard enters pairing mode. ③ Charging indicator: Red while charging. Green when fully charged. ④ Power indicator: When the unit is initially turned on, the power indicator will light in blue for 3 seconds. ⑤ OFF/ON button ⑥ Connect button: Press “Connect” button to enter pairing mode.
Cut Cut Previous track Previous track Play/Pause Play/Pause Next track Next track Mute Mute Volume - Volume - Volume + Volume + Lock screen Lock screen Power display Power display Trouble Shooting If your device doesn’t respond to the keyboard, try the following steps: 1. Restart your device. 2. Switch the keyboard off and back on. 3. Delete the Bluetooth keyboard from the search list, then follow the instruction and try to connect again. 4.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.