User's Manual

ManualsBrandsShenzhen Hangshi Technology ManualsComputers & AccessoriesBluetooth Keyboard

Multi-Function Keyboard with Touchpad

for Surface go

User Manual

Package Contents

1. Bluetooth Keyboard

2. Micro-USB charging cable

3. User Manual

Product Overview

①Power indicator（green）/Fully charge indicator（green）

②Bluetooth pairing indicator（blue）/Caps Lock indicator（green）/Battery power

indicator（red）/low battery indicator（red）

①② Reset indicator（green）

③Micro charging port

Summary of content (5 pages)

PAGE 1
Multi-Function Keyboard with Touchpad for Surface go User Manual Package Contents 1. Bluetooth Keyboard 2. Micro-USB charging cable 3.
PAGE 2
④Magnetic power on/off location（2 locations） Pairing Steps 1.Power on ： Place keyboard cover bottom attract to one of the magnetic locations,power indicator turns on 5 seconds,then off. 2.Keyboard enters pairing mode：Press Fn and C keys at the same time,bluetooth pairing indicator flashes blue. 3.Finish pairing：Turn on your device’s bluetooth setting,device searches the keyboard pairing name”Bluetooth 3.0 Keyboard” automatically,click the pairing name,bluetooth pairing indicator finishes flashing.
PAGE 3
Specifications Bluetooth Specification Touchpad Bluetooth 3.0 PixArt chip, with left and right click control keyboard Operating Range < 10 m (33ft) Lithium Battery Capacity 280 mAh Stand-by Time 90 days Charge Time < 4 hours Uninterrupted Work Time without backlit 187 hours Uninterrupted Work Time with backlit 5 hours Lithium Battery Life 3 years OS Supported Windows Note: Press Fn key and hot key together to activate action.
PAGE 4
SPECIAL NOTE: 1. Please get it charged before first usage. 2. Only one device can be actively paired at one time. 3. After pairing for the first time, your tablet will connect to the keyboard automatically when opening the keyboard. 4. In case of connect failure, delete the pairing record from your tablet, and try the above procedures again. Power Saving Mode The keyboard will enter sleep mode when idle for 30 minutes. To re-activate it, press any key and wait for 3 seconds. Charge it 1.
PAGE 5
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules.